Thread: Data(green) light permanently on

Facing a serious problem..i have accidently opened 192.168.1.1 thru a browser...then i changed restore factory setting...aaaha link gone...after sometime link came but data light is on.....

my current status:-

pppoe_0_35 0/35 UBR LLC/SNAP On
(connect/disconect)

problem doesnot end here....
when i am dialing broadband i cannot access anything ...connection failed

but using 192.168.1.1..under ppoe i can connect or disconnect...

help me

my model number SIEMENS C2110

C2110 dataone modam configuration(BSNL Broadband): C2110 CPE Configuration

C2110 (Type-A) ADSL MODEM MULTIUSER CONFIGURATION

i have just now did wat u hav said..but i not m getting rid of it..as soon i m doing bridge connection 0/35..i m not able 2 surf pages though i m getting full connectivity..as soon as i change it again 2 pppoe i m able 2 surf net,,acess pages help me

are you able to ping an external ip like 208.67.222.222 ?

yes i can ping it...i m pinging using command promp...

i had visited d site ...not got any info,,cann u giv me d link

afetr setting to bridge mode in modem in your PC LAN settings set IP to 192.168.1.6,gateway to 192.168.1.1,network mask 255.255.255.0 & DNS server as 192.168.1.1(primary).

no its doesnot....pppoe is needed....o_35.....again problem is i m not able to dial a connection its automatically connected.....wat to do....kolkata customer care r hopeless not helping me....

i m not able 2 dial connection.though i can access net.....but not bridge connection ..i m using ppoe0_35...enabled nat enabled default roue...dere after data (green) light is on///enabling brigde0_35...doesnot allowing me to surf net..dere i can dial a connection..
bsnl customer care is worst ..not helping me

modem c2110
problem is i m not able to dial a connection its automatically connected..
1.
If your browser is IE
go to
tools
Internet options
connections
select never dial a connection
Ok or apply and save.
Feedback.

2.
In Network show all connections
select dialup connection
delete. if not working.

3. start/ all programs/accessories/
communications
create new dialer.
Network connection wizard
follow instructions.

4. Now in modem change in WAN page to "Bridged"

5. Feedback.

as soon i m doing bridge0_35...i m not able 2 surf net but i can dial a connection


the moment i m doing pppoe0_35 i m able 2 surf net i m not able 2 dial a connection.connection is to b established from 192.168.1.1,,,,

got it???wat 2 do now..thanks for replying


i m using vista......opera 9.61

C2110 (Type-A) ADSL MODEM MULTIUSER CONFIGURATION

In step 14 presume you are selecting "bridged".

1. Your dialer settings are incorrect.
or
2. In modem settings are not correct.

If in "Always On" mode you can connect
in Dialer mode also should connect to Internet.

3. In dialer mode ( I have XP pro sp2 )
Start RUN type cmd
type Ipconfig /all
post data.

4. Compare with "Always on" connection (3)

changing to Opera to check. settings for connections.
update: no settings for dialer seen.

i think d problem is in modem configuration......]
Tell me d details configuration

i m not able 2 select PVC NAME,,,I M USING siemens c2110..(version old one)
not nokia siemems c2110(new)...so i link u gave doesnot work fully..
send me d modem config
Current firmware version is V55.1.03.06
i m telling wat m i doing
1. 192.168.1.1......thru opera
2. made bridge0_35 edited chnaged to

3. vc and vp 0 35 ----> ppoe>>>obtain any wan ip>>>>llc/snap...then its done

4. doing bridge i cannot surf net though i can dial using windows dialer...



thanks for replying

if your able to ping 208.67.222.222 then try this also , go to internet explorer and type 74.125.127.100 . does the google page open?

@supraksh

yes google is opening....but my problem is different...i can access net but data is always on in ppoe mode...in bridge mode data is off( which was my actual setting before)but i cannot acces net

you mean the DATA LED in the modem? why are you worried about that , if your internet is working fine

oh ok , so your actual problem is , pppoe mode works but bridged mode doesnt work , right?

Yea dat data light..i m worried bcoz i m not able 2 dial a connection although in pppoe mode..as soon i m switching modem on i can surf net open pages......fine

but to disconnect i have 2 go 192.168.1.1..everytime.......to connect and disconnect dATS the problem

in bridge mode light is off but connection can be made using dialing...but no pages r opening


DATA IS NOW BLINKING AND BECOMING STATIC SOMETIME...


using vista and xp..all same....opera 9.61 is d browser

vc and vp 0 35 ----> ppoe

Uncheck this button.
selected " Bridged"
Save Reboot.
Use dialer to connect.
( enter userid and password in dialer )

Not got u...

Uncheck means????

I have 2 give user name and password else i cannot apply changes....

in pppoe mode , to switch off internet you could just switch off your modem , thats what most people do , you dont need to login to 192.168.1.1 and do it..

in bridged mode , when dialing are you sure its connected successfully , does it says " registering your computer on the network" ?? are you then able to access 192.168.1.1 ?? are you able to ping 208.67.222.222 in bridged mode?

Originally Posted by superprash2003

in pppoe mode , to switch off internet you could just switch off your modem , thats what most people do , you dont need to login to 192.168.1.1 and do it..

In bridged mode , when dialing are you sure its connected successfully , does it says " registering your computer on the network" ?? Are you then able to access 192.168.1.1 ?? Are you able to ping 208.67.222.222 in bridged mode?

yyes in bridge mode it says..but no wan ip address saying not configured....nat is off

now in bridge mode dialing connected registered .....i can visit 192.168.1.1.....but i have not checked dat ping one.....

I m now afraid if i do bridge i cannot access net pages...so i cannot able 2 contact u people also......wat to do?????

you always know how to go back to pppoe mode right!!..so the dialer works fine in bridged mode. but your sure of WAN Ip?? you have configured bridged mode in the router right?

Originally Posted by superprash2003

you always know how to go back to pppoe mode right!!..so the dialer works fine in bridged mode. but your sure of WAN Ip?? you have configured bridged mode in the router right?

i m now in ppoe mode....should i go back to bridge???

but i m not able to choose d option" OBTAIN ANY IP ADDRESS" while i m chnaging 2 bridge mode in 192.168.1.1,,,,

after bridge mode i will b disconnected..so tell me wat 2 do next.....thanks once again

when you are using pppoe mode do you using your Bsnl user id and password to your modem to connect the net?

If you are not able to connect the net in bridge mode but you are successfully log in to the bsnl isp using your user id and password then it's mean the problem from your side.

do a bridge mode again and log in to your Bsnl isp and cheak this address it is opening or not.
http://69.147.76.15/

If you can open this address then the problem from your firewall settings or any antivirus with firewall settings where the dns blocking by the firewall.

Uninstall the antivirus with firewall and try again.

I am from Kolkata -- SaltLake

@bunty20077
see this modem page.

http://s226.photobucket.com/albums/d...ppoe_0_352.jpg

Now your settings are in PPPoE "always On" mode.
Uncheck the button in above page.
Select "bridged"
click NEXT
rest no changes.
Save REBOOT . WAIT for one or two minutes.
.
Now you can use your dialer.

Feedback.

now dere is no REBOOT option dere..only 1 option is dere RESTART...should i do dat????


i m not able 2 click "obtain any ip adress"button,,dere in WAN ip i m not allowed 2 do any change....none is highlighted,,,,

therefore in wan ip it is written......NOT ASSIGNED..

i m doing now wat u had said....

reboot=restart . keep it as obtain any ip.. dont enter any ip.. yea i guess not assigned should be the correct option