Looking for Device Driver for Lan Card- NetQuest NQ-FE2100

Guys, I am Looking for Device Driver for Lan Card- NetQuest NQ-FE2100 for past Two Days....
I googled the whole Day, but not able to reach the manufacturer's site. The manufacturer is NetQuest. Please Let me know where i can find the driver for this device.

Is this lan card inbuild with Motherbord
If so then go to the support web site of the motherboard companny
and download the driver software.

I see the chip set of the LanCard in picture

I have a driver you can try with it
What is your email address
I will send you the driver attachement.

http://www.netgear.com/upload/produc..._fa311_21nov07.

Probably same/ or clone. . A PCI ethernet card. Korean make.

Check in DEVICE Manager the driver details.

What is the problem with present driver , if already installed ?

START/network/ LAN
network settings.
0n top ethernet box .
click configure.
get details.

have you tried telling windows to automatically find the driver ( not on your pc but on the internet ) it works well most of the time!!

Essbebe, Yes, the Card Looks exactly like the one in the Picture. I tried the link, but I am getting page not found error. No I have not installed this yet.

In forum , like this, please avoid posting email address.
( you may get spam mail too !)
You can use the Private message facility
to send your email to any member.
Click "USERCP" link on top of this page.

Please edit and delete it.

In this forum, members give different suggestions,
based on the input given by thread starter and based
on their experience/knowledge etc.
That helps in solving the issue faster.

Normally, i do not send response/s by email.
I also learn , reading other contributer's posts.


Para two:

No I have not installed this yet.

(A).If you have purchased it recently,
an installation cd would have been
provided along with the PCI ethernet card .
Run it or check the contents.
Confirm.

After you install the Ethernet card
(B)
1.START/ Network LAN
Properties
Network settings.
On top there is a box for the ethernet card.
showing " NetQuest NQ-FE2100"
2. Click configure

3Check , whether it is enabled.

4. Then click " drivers"
copy the list and post it here.

5.Also try Trouble Shooting and
follow procedure..

6. Download the bigger picture from
http://www.netgear.com/Products/Adap...ers/FA311.aspx
http://www.netgear.com/upload/produc...duct_fa311.jpg

7. Check in same site for driver downloads.
( if you don't have ANY drivers for the PCI card )

Thank you Essbebe for that guidelines.(Henceforth, I will not leave the Email-address open on the Page)I am new Newbie to this Forum. It took me a lot of time to post my first message... Hee Hee...

I don't have the Driver Cd. I misplaced it.Now I have done a fresh install and windows xp is asking for the drivers.

I followed the Link and had been to Netgear site. That is not the card I am having. There is a noticable difference in the build between the two.

If you think it is a clone of it, I ll go ahead download and install the drivers. (I found a Driver there) Shall I give a try?

In the box there should be some instruction sheets/.
Specifications etc . If you have lost them also

(C)
Try other steps suggested here.
Windows cannot Download /search for drivers unless
you are connected to Internet.
How you connect your System now ?.

(D) Switch OFF computer.
Insert the PCI card in the slot in your Desktop
connect the Rj45 cable from modem to lan card .
Switch on the Computer.
You will get Message " New Hardware found"
Asks for drivers.
Select from a list.
Select Netgear model.
or
Select location C:/windows/System32/drivers
Feedback.

nagesh.j I send you the Driver attachement to your email address.
The chipset what I see in the picture should work with this Driver I think.
Reply with your feedback.

http://drivers.softpedia.com/get/NET...or-2K-XP.shtml
http://www.softpedia.com/images/soft...load_small.gif

I am sorry.
Actually I wanted to mention Realtek PCI ethernet card.
I have selected above driver for older computer/s.
Please try above driver, if @indrani's driver/s are not suitable

Try to set a system restore point before installing
a device driver. This will help if you installed a
wrong driver. Problems can arise when your
hardware device is too old or not supported any longer.

Feedback.

Try driverguide.com. Fre registration is required.

I think driver agent has similar service. Please try.

Company not listed in Drivers guide. Under "N"
Sent message asking for inclusion.

Indranil, the driver you sent to me did not work. I also tried with the real tek drivers which essbebe gave. Finally, I discarded the Card and bought a new one.Thank you Indranil and Essbebe fo your interest and efforts. Thanks a lot.