India Broadband Forum

shirish_kal

Frens i wanted to know something about night unlimited home 500 plan
i read somewhere that if net is connected from 2:00 AM < connection time < 8:00 AM then its ok but if i connect continuously say from 6:30 to 8:30 i will be charged for comlete data transfer and not just the one from 8-8:30

Thnx in advance and sorry if my question is repeated tried searching but was not able to find


And i Too (Lot like others )am facing problem of frequent modem disconnection it is pretty annoying .... and there is no response from BSNL guyz they just call saying they will come but they don't

rupu1983

Look it's not like that just follow this
1.Set your PC clock with BSNL server

2. Connect the internet at 2:02-2:06 AM

3. Never connect before 2 AM just for unlimited download.as a example if you connect net at 1:40 AM - 3:00 AM then BSNL will charge you full usage in that session.So procedure is disconnect the net at 1:55 AM and reconnect it 2:05 AM

4. Now in case of morning although such thing BSNL never did if you connect at 7:00 AM and disconnect at 9:00 AM normally BSNL never charge you full usage for that.Even they never charge you before 8:20-8:25 AM.

5.Just remember this is unofficial free time we never know when they will charge so better to disconnect it at 8:00 AM and 2nd thing to take this unofficial advantage you have to remember that night unlimited login session must be less than 6 hour. That mean if you connected at 2:02 AM then disconnect it at 7:55 AM and reconnect it again at 7:56 AM to get this advantage.

meetdilip

To be on safer side, always reboot a little after 2.00 am and a little before 8.00 am.

shirish_kal

Thanks for the prompt reply Friends but i am still not clear about this unofficial free time as u mentioned because they have mentioned about it while purchasing plan and it is on internet.... I don't use it at night(Am from Ghaziabad ,UP we have power cuts of 10 hrs per day so i don't rather i Can't) its just at mornings that i am concerned off....

My friend has a net connection of 2mbps and when ever i try in "speedtest.net" it shows 2mbps but when i download from torrent because of lack of seeds or so i get speed of say 512kbps (Am saying for example OK!!!) then the remaining band width should be available for browsing but it doesn't happen as my browsing gets devastatingly hampered by torrent while am just d/l @512kbps and uploading @ 100kbps or less

This specially happens when any particular torrent is bot downloading or uploading am not sure about it but i feel so

Thanks in advance
________________________

meetdilip

For torrents, port forwarding will be useful to increase the speed. Select your modem from portforward.com.

You need not be awake to avail night unlimited. The whole process can be automated. Try this

http://imran-utilities.synthasite.com/

shirish_kal

Hi i used portforward but it has a different page of default gateway it is showing option for advanced setup but mine doesn't have any such option

just4kix

You must correctly understand the concepts of port forwarding and why it required, how it is done, etc.

Please read: Torrents and Port Fowarding Guide

superprash2003

if you still have problems, do post your modem model no

shirish_kal

Thnx for the reply friends i don't know if it helped or not cause my net has become very slow know even in speedtest it shows 0.22mbps well any way

Guyz is there any way or tutorial in particular that tell me about default gateway like the guy from ISP camover and changed my conection from pppoe over ethernet to MAC Encapsulation Routing and earlier there was no option for service category so is there any link or tutorial where i can understand about it

Actually i am conected via to routers through lan switches and the switches are interconnected ...so wt i wanted to know is can i access both routers if yes how and can i use best of both worlds i.e initiate two downloads simultaneously on both connection..... i have only one LAn card on PC

limpu.cool

With only one LAN card it is not possible to connect to two routers simultaneously...

shirish_kal

Guyz thnks for replying friends my problem there was solved I have just one more request man u guyz must be mad at me asking so many questions but i gotta know i have lot of doubts regarding the settings in router web page so i wanted to know if there is a document or tutorial to know abt it atleast the basics coz once i am familiar with basics i will do rest of the research on my own i just need a stepping stone to start

just4kix

No problems. Ask as many questions as you like.

As far as your questions are concerned, and all your other queries, please read the many guides posted in the Broadband How to section.

Also check out my first signature link.

shirish_kal

Thnx a lot just4kix great articles there very informative

I know this is the wrong forum to discuss this but i wanted my question to be continued from earlier so....Well my doubt is I use a dialer so i use bridge mode
So when i check 198.168.1.1 in the WaN option there are two rows 1 with vpi/vcn 1/32 and 0/35 both in bridge mode can u explain about it what it means and so i need both

shirish_kal

Guyz I have got one more problem I have a beetel100bxi modem and bsnl home 500 plan I used to have frequent disconnection problem earlier and after so many complaints and fax's still no response from BSNL .... but anyways i was just messing around and connected my modem directly to telphone line i.e without splitter box and it amazingly worked extremely well no disconnections nothing but when i include the box again the li9nk and data led's on the modem are not blinking at all now i Have checked splitter box with my friends and the 3 cables araound splitter all are OK .... Plz suggest am too confused