Results 1 to 6 of 6

Thread: Help needed in setting up C2110 modem with Airlink AR670W for dataone

  1. #1
    Junior Member
    Join Date
    Jul 2009
    Liked
    0 times
    Posts
    2

    Default Help needed in setting up C2110 modem with Airlink AR670W for dataone

    Hi - I use dataone Nokia Simence c2110 modem to connect to internet. to connect I use username and password. Recently I purchased an Airlink101 AR670W router to setup wireless concretion. I tried all the setting but failed to connect to internet. I can reach the wireless network as typing 192.168.1.1 taking me to the wireless configuration page. but can not connect to internet.
    Can some please guide me to configure the router and the modem, if necessary.

    I am using Winodews Visa home, Accer notebook, Airlink101 AR670W router, Nokia Siemens c2110 mdem for dataone connection which requires a login.

    thanks in advance

  2. #2
    LEARNER
    Join Date
    Aug 2007
    Liked
    20 times
    Posts
    15,295

    Default

    http://i18.tinypic.com/7yqpzps.jpg
    . if any LAN ports available ? did you try lan connection first ? ?

    if you use c2110 Ip 192.168.1.1 try "Always On " mode >
    Airlink should have IP as say 192.168.2.1
    Both units cannot have same IP.

    REF:http://www.calcuttatelephones.com/da...all/mdm09.html
    http://www.airlink101.com/download/ar670w.php

  3. #3
    Platinum Member
    Join Date
    Feb 2008
    Liked
    0 times
    Posts
    2,766

    Default

    what you could do is , configure your modem in bridged mode ( vpi/vci 0/35 set it to bridged ) .. then connect a LAN cable from modem to WAN (INTERNET ) PORT of airlink . Then fill in the page of the airlink router as shown in the screenshot by essbebe.. that should work!!

  4. #4
    Junior Member
    Join Date
    Jul 2009
    Liked
    0 times
    Posts
    2

    Default

    Thanks.. but I am not using LAN. trying to use WAN directly in laptop.
    sorry for bugging, I am fairly a novice in setting up the networks..
    I am yet to configure. []

    the setting I have done is as follows.
    Modem IP : 192.168.1.1, it is bridged but NAT is off. I tried to put it on but failed.

    Router IP: 192.168.2.1
    primary DNS : 61.1.96.69 ( I dont know why)
    DHCP : Disabled..

    please help if I am missing something.

  5. #5
    LEARNER
    Join Date
    Aug 2007
    Liked
    20 times
    Posts
    15,295

    Default

    Firstly, let us RE-connect to Internet with c 2110.
    See this and the screen shots ( 10 are given )
    http://www.indiabroadband.net/bsnl-b...html#post44564 (Make my line better)
    MTU1492. etc. . .

    try and get connected. feedback.
    give feed back.

  6. #6
    Platinum Member
    Join Date
    Feb 2008
    Liked
    0 times
    Posts
    2,766

    Default

    @bubul
    no reply from your end??

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •