Thread: port forwarding problem in D link GLB-502 T modem

hi,i use a d link adsl GLB 502 T modem.i have my password saved in the modem itself so i have to switch on my modem only to get connected.

ever since the beginning i am facing a strange problem-the DMZ button gets unchecked automatically which disables the port forwarding for my connection.i then again have to enable the DMZ button manually to enable port forwarding.and still then after a few days it gets disabled.
i keep my modem on 24/7 as i am using a 750 UL connection.

it is not a major issue or problem,it's more of a irritating nuisence. any one else having such problem.also is there any solution?

the DMZ button gets unchecked automatically which disables the port forwarding for my connection

Did you Save/Reboot again from maintenance option. ?

Since you are on "Always On" mode
you can try Port forwarding
Under Advanced options
NAT virtual server /Port triggering and DMZ

Dmz is not recommended as all ports are open,
and you should use always
Firewall/AV programs.
Check also Windows Firewall
settings , if enabled.

Out of thread :
Download Yahoo Toolbar for your Browser and d/l Yahoo Anti spy.
Using CA Yahoo! Anti-Spy: Installing CA Yahoo! Anti-Spy?
Run it every week
and delete all trojans/spyware malware detected.
Pretty fast.


REF:
D
h t t p://www.dlink.co.in/GLB502T_Guide_modified/index.htm

connected via USB or LAN?

i am connected using the USB port.

i did save and restart the modem after ticking the button.i have attached an image.

Originally Posted by essbebe

REF:
D
h t t p://www.dlink.co.in/GLB502T_Guide_modified/index.htm

i looked into this link and i did find the solution to configure manually.

anyways thanx essbebe and superprash for replying.
cheers

just for some extra information , i had the same issue as you when connected via USB , where all settings made wouldnt stick , which is why i asked you whether you were connected via USB or LAN.. connecting via LAN and configuring can help