Thread: Configure Huawei MT841 in Bridge mode[ from PPoE mode]

Guys , i am using a Huawei MT841 modem currently in PPoE mode ( "Always on" )..but in this mode i am unable to use the download scripts for scheduled downloading. Hence i want to REVERT back to Bridge mode to utilize the 2 - 8 download time...so can u guys please tell me how it is done ,and also the scripts for this mode . Any help appreciated .....thanks a lot....

P.s I did a search but couldn't find any posts telling me how to do it...

there has been some discussions going on in the forum that you dont need to restart your modem between 2 and 8 am , and that bsnl does that automatically..

there has been some discussions going on in the forum that you dont need to restart your modem between 2 and 8 am , and that bsnl does that automatically..

Really ??? But if i don't manually restart my modem at 2:00 AM then i incur data downloads about 370 MB [ modem on from about 12:00 AM ] instead of 0 MB .. how do you explain that ???

No answer on converting to bridge mode ?? c'mon guys ....

thanks for your help...

SmartAX MT-841 (Type-III) ADSL MODEM MULTIUSER CONFIGURATION

In step 7 do not delete PVC0 already in "Bridged" mode. 0 and 35.

select edit
IF new page opens check "Bridged" button.
or
Save reboot wait for 2 minutes.
use dialer to connect.
enter your user Id and password.

Just to be on save side , go to maintenance
and SAVE present settings to say C:/MY Documents/MT841 PPP/PPPoE

Feedback.

REF:CONFIGURATION

Use this to reboot in PPPoE mode

http://imran-utilities.synthasite.com/

@ essbebe
Thanks a MILLION essbebe worked like a charm .......

@dilip -- imrans utility not working ...
error : " failed to reboot modem "

rasdial dataone /disconnect --> working correctly .modem disconnected

but...

rasdial dataone <username> <password> --> not working...
whats wrong with this command ??


thanks for your help.... appreciate it...

Welcome

This should work.

rasdial [connection name] [user name] [password]

@ dilip

This should work.

rasdial [connection name] [user name] [password]

Nope..not working ..

Error Code at command prompt : :

" Remote Access error 623 - The system could not find the phone book entry for this connection.

For more help on this error:
Type 'hh netcfg.chm'
In help, click Troubleshooting, then Error Messages, then 623 "


I double checked the connection name , username and password everything's fine .....what might be the problem ???

... Thanks .....