Thread: Modem type UT300R2U connection problem

hi all,
I am connecting UT300R2U modem with my PC through USB, It is working fine with my laptop connected through ethernet. ( Earlier it was working fine with PC too but as my PC crashed down the settings were reset.)
I followed the steps for Broadband configuration and first time i was able to connect to 198.162.1.2 but after choosing to reboot the router all connection went down.
Now when i try to connect 198.162.1.2 it shows me "Page cannot be displayed"
When i try to ping 198.162.1.2 it says Destination host unreachable
Please help me out.

Thanks in Advance

Start > run > cmd > ipconfig/all, post the screen shot.

as my PC crashed down the settings were reset.)

remove USB cable from computer end.
Uninstall modem usb drivers.
Now again load the drivers to say C:/My Documents?UT300r2u USB.

switch off system
connect modem usb cable to Computer USB port
restart system
Let Windows detect New hardware.
asks for drivers
specify above location and load drivers
, if it worked earlier , now the drivers will be accepted.
else "BOD" computer may switch off.
Now Check connection in desktop.
feedback.

also try typing ipconfig /renew and then try accessing