India Broadband Forum

napster5787

i use a beetel 450bxi and i configured it on day one i got it, it was working all fine, even the wifi was working cool but then yesterday suddenly it stopped working, when i tried accessing 192.168.1.1 it isnt responding, the dsl led turns on, power led turns on but nothing happens,
can somebody please help me out with this? please?!

essbebe

Beetel450BXI
Start RUN type cmd OK
New page opens
type ipconfig /all
Post data here.

The default gateway is your modem's
( usually 192.168.1.1 ) admin Password as password.
Now try to open modem's settings.

Recheck cables and connections.
Check the Diagnostics page and report.

This link gives you full idea how to configure the router.
( same hardware board and modem settings pages ) confirm

REF:http://www.indiabroadband.net/bsnl-b...reference.html (UTSTAR WA3002-G4 quick reference)

napster5787

http:
//img1
80.ima
gesh
ack
.us/i/5
794
7324.jpg/
(kindly remove all the spaces in between to view the pics , doing this coz im not allowed to post links)
this is what i got,
im ok with the configuration part, i've done it few days ago and can do it again also, but the problem is that the config pafge we get by entering 192.168.1.1 isnt being displayed
it doesnt even ask me for u_id n password

essbebe

You seem to have VISTA OS.
Start/ Network/LAN
properties
Disable IPV6
TCp/Ip
enter 192.168.1.10
255.255.255.0
192.168.1.1

dns
208.67.220.220
208.67.222.222

Apply Save.

Reset the modem/router to factory settings.
open 192.168.1.1 admin password

SEE this link as reference for all settings.

http://www.indiabroadband.net/bsnl-b...reference.html (UTSTAR WA3002-G4 quick reference)

feedback.

napster5787

after networkingnothing called LAN is being displayed
resetting the modem can be done once you login to the config page right? my problem is that the page itself is not being displayed

essbebe

I have Xp Pro sp3.
Procedure to create a LAN network
START/All programs /Accessories/
Communications
Network connection Wizard.
Follow instructions.

feedback.

napster5787

got the lan settings thing, did the changes you listedout, but still nothing workedout, again the same problem, canot display the page, is it a problem with my modem or my computer?
do you want me to check the config page of my modem with another computer?

and is there any manual procedure to reset the modem??
i cant find any button or something outside though

essbebe

Whether your modem works or not the LAN or wireless lan network must show.
Para two:
The reset switch ( access hole) normally between Antenna and power socket.
Or
see bottom near right side leg. a small round hole. ( rest square as air vents)
press with a ballpen refill for about 20 to 30 seconds
to restore factory defaults.
feedback.

napster5787

dude, thanks for your help, i opened the modem + router, took a keen look at it and found a button, guesses it to be the reset button, powered the modem and i pressedit and held it for some 5secs, the dsl led blinks and then the modem has been restored to factory settings, i can now browse again,
im soo happy

essbebe

@napster5787.
Congrats.
kindly confirm whether the reset access was in the rear or
at the bottom of the modem/router.

2. Hope you can save present settings of
the router for future reference.

.For wireless security use WPA keys.

4. Also follow this procedure
Start RUN type cmd Ok
New Window opens
type Ipconfig /all
for both Desktop and laptop.
5
If you wish you can post the data here for
reference at a later date.
and as guidance to others.

REF:http://www.indiabroadband.net/bsnl-b...reference.html (UTSTAR WA3002-G4 quick reference)

napster5787

thanks bro, the reset button at the bottom of the router, and i use mac restriction for security issues, that is the best as far as i know, settings and all im found of them, i can easyly configure them
ill post the data soon
thanks for the help anyways