Thread: Problem In PPPoE Mode

Hi All.

Actually i need a help . one of my client is in remote area he called me last night he wants to use his broadband connection in two PC he is having 4 port Wifi router. so i told him to switch to pppoe mode from Bridge mode. he did same then i told him to check status on routerand he got connected.
but he is not able to open any web site on his both computers.he is using windows Xp in both Pc's.

plz help me if i am missing some important step in Pc's or in router.

Thanks In advance

Free_hugs

Check settings.
Try to connect one computer.
In modem enable DHCP.
In both computers
Start network LAn or WLAN
Properties
TCP/IP
properties
obtain Ip address automatically.
dns
existing entries or
208.67.222.222
208.67.220.220


ADD TO BOOK MARKS IF FOUND USEFUL.
http://www.indiabroadband.net/bsnl-b...tml#post208783 (UTSTAR WA3002-G4 quick reference)

[QUOTE=essbebe;240029]Check settings.
Try to connect one computer.
In modem enable DHCP.
In both computers
Start network LAn or WLAN
Properties
TCP/IP
properties
obtain Ip address automatically.
dns
existing entries or
208.67.222.222
208.67.220.220


ADD TO BOOK MARKS IF FOUND USEFUL.


i had done this all step
1. modem is dhcp enabled
2. Pc on obtain Ip address automatically.

but Not worked

Enable NAT option in your router

At least mention the model and make of the WIFI router you are using.
In the link I had given, almost 20 to 25 adsl modems/wifirouters , settings
which are common is available.

Some of the links have step by step instructions with Screen shots.

Firstly :
connect the Router to a SINGLE computer ( desktop or laptop)
with a RJ45 cable. Get connected to Internet. Confirm you can surf.
Secondly ;
Then check same way with the other computer ( laptop or desk top )

Thirdly try on system in WIFI mode.

Contributer/s have to make all sort of guess tweaks, because
users are very brief in their reply.
Someone will suggest RESET the modem/router etc.

Since you say the unit is in remote place,
you have to your friend step by step.

From the computer:
Start RUN type cmd Ok
New Window opens:
type ipconfig /all

post the data without editing or changing Ip etc.
nothing secret about this.

In the router see Diagnostics Menu.
send "FAIL" component details.
A screen shot will also help.
Post as annexure jpg picture reduced in size.
( if not from the failed connection , from your own with
comments )