Thread: configuring modem...Urgent

Hi to all
first of all
many many Thanks for your previous suggestions
& i happily purchased home plan 750 UL

so,
Bsnl Lineman came to my home for the set-up
he did everything, but unfortunately there was electricity power -off
so it was half done...
now he'll come by his own busy schedule..three days later
but for me its urgent ...hence forumming this through net-cafe right now...


please can anybody suggest how to configure a modem for the connection


After connecting Modem & telephone line
as said by the Lineman
i went to http://192.168.1.1
then typed username & password correctly as admin & admin
then after clicking Advance Setup then clicking WAN
then clicking "Add" button
Then keeping default values of VPI =0 , VCI =35
and then clicking Next
i found.... this is not sufficient



and another thing is
what should be the lan-TCP properties at the time of configuration
for Home plan750 UL
is it
1] automatically detect
OR 2] DNS : 61.1.96.69 & 61.1.96.71
OR 3] DNS : 218.248.255.146 & 218.248.255.139



Dear all...please please Help

Please mention, Modem - model and make

or choose from here

BSNL BROADBAND MAIN MENU

Follow the instruction for ADSL modem configuration for Multi use.

Thank you so much dilip for the valuable response

my modem model name UT-300 R2U (Starcom)

go here

for more plz specify ur modem

thanks for the response Friends...

is it possible to open the above link without having connected from Home

as...... this is "configuring for NEW CONNECTION" without connected online

please help

Either read it by heart or take a print out ( it is only one page long) so that you can refer when required. First select your modem and confirm that it is in the list.

Originally Posted by meetdilip

Either read it by heart or take a print out ( it is only one page long) so that you can refer when required. First select your modem and confirm that it is in the list.

Thanks dilip

i will take a print then...

many many thanks

any further suggestions from u please....

first select ur modem......
then just press the "Print Screen SysRq" Button on the keyboard and then paste it in paint and then disconnect.......

Always Welcome Rahul. See you soon from your home connection.

dilip is very helpful.....

see post #8 for more suggestions.....

Friends.....

i used that guide ( here is screen-cap)

but i found some different pages......not as per given in that guide

i am giving the pages-images ( screen-caps )
by sequence

when typed in.... this address http://192.168.1.1
got it right... as http://i30.tinypic.com/2ekufpy.jpg

then by clicking Advance Setup / clicking WAN
got this http://i29.tinypic.com/es5agi.jpg

[ OR http://i30.tinypic.com/16m99xl.jpg ]

then by clicking "Add" button
got this http://i27.tinypic.com/10ibhvb.jpg
and this
http://i31.tinypic.com/do9ddy.jpg


in short........by clickin on WAN
i got different pages than mentioned in the bsnl guide

so please please please Help

Remove all entries except 0/35

ya...certainly i'll remove it...
but Bhai.....is that will be enough
i'll go to home & try it &
then coming back to net-cafe to reply in the Thread


Thank you so much..... for ur so....valuable reply

see these two links with screen shots and instructions. The little I know about Dataone Broadband Services offered by BSNL
for Dialer mode

The little I know about Dataone Broadband Services offered by BSNL
for "Always ON" mode.
click next in
http://i31.tinypic.com/do9ddy.jpg

Here is a complete guide: UT300-R2U Ver 2.2 - Guide for setting up

Hello just4kix

i did the suggested step earlier by deepmohan
removing all except 0/35
and then auto- rebooting of modem
got the message as "modem is configured"
but still can't able to connect
(anyways thanks for deepmohan )
here is screen-cap


do this step will need to re-install/re-configure

i'll go to home & try the new guide as given above

and then back to net-cafe
thanks dear just4kix

From the above screenshot I dont see your Upstreem and Dowstreem rates. Cheak your line have the ADSL signal.
Do you put your user ID and password in the router. You have to put your user ID and password in the router to log in from router.

Go to Device Info -- WAN
Cheak what it say, Is it say PPPOE is down.

Have you gone through the settings guide provided by just4kix...?

Pages will be different but the basic things are same only.

After page 3 refer page 7 for PPPoE setup.

Guide for setting up

Thank you all

Bsnl official fortunately came to home
and connected it....somehow....

but i am getting dial-up speed....very very low

please post you speed test result over here.

Speedtest.net - The Global Broadband Speed Test

certainly Bhai
i am going to post...

Read a few guides in the "Broadband How To" section. That should help you quite a bit.

After clicking "Your Results" button

i got this http://i38.tinypic.com/24ou0r7.jpg

please help

Originally Posted by just4kix

Read a few guides in the "Broadband How To" section. That should help you quite a bit.

ya........certainly Bhai.......i'll definitely try it

Your speed is too low for a 2 mbps connection. Check your SNR margin from the modem status page.

Your speed is very low.

1. Try a different server and test the speed

2. Post your SNR and attenuation values

Procedure:

Type 192.168.1.1 in your browser, click enter, ID and password admin.

3. Try TCP/IP optimizer from speedguide.net