Thread: WA3002G4 Sharing Internet Connection

Hi, I'm using the WA3002G4 wireless router provided by BSNL for a wireless connection for my laptop. I wish to share this internet connection with my pc too... how would I go about it?

see this link and select which ever guide
you find,suitable.
http://www.indiabroadband.net/bsnl-b...reference.html (UTSTAR WA3002-G4 quick reference)
use "Always On" mode ppp/PPPoE

enable DHCP in modem.

From Modem Lan1 connect to ethernet port of desktop.
Presume your laptop is working in WIFI mode.

I've followed all those steps listed on that thread, and enabled DHCP and I'm using Always On too. The laptop does work in WiFi mode. But when I connect the cable from the ethernet port of the PC to the modem, the network connection icon just keeps on saying that its acquiring network address, but never actually gets connected. Any ideas?

Post ipconfig / data for both desktop and laptop

Procedure:
start Network/LAN
Properties
select tcp/ip
properties
assign IP address automatically.
apply Save>
2.
Also in same page check the box on top
Your ethernet card is shown
click "configure" ensure enabled etc.


3.
Post ipconfig /all data
procedure:
start run type cmd Ok
new window
type ipconfig /all

copy/paste data here for both desktop and laptop.

IPConfig data for the laptop:

Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.1


IPConfig data for the PC:

Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 0.0.0.
Subnet Mask . . . . . . . . . . . : 0.0.0.0
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : 0.0.0.0
DNS Servers . . . . . . . . . . . : 218.248.255.194

Any help?

Any ideas how I can share internet connection?

ipconfig /all data
will show the ethernet card or wireless card used.

C:\Documents and Settings\xxxxx>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : xxxxx-vz2p3hxuj
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : Yes

Ethernet adapter Wireless Network Connection 2:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : NETGEAR WG511v2 54 Mbps Wireless PC
Card
Physical Address. . . . . . . . . : 00-14-6C-8F-9B-67
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.2.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.2.1
DHCP Server . . . . . . . . . . . : 192.168.2.1
DNS Servers . . . . . . . . . . . : 208.67.220.220
208.67.222.222
Lease Obtained. . . . . . . . . . : Thursday, October 15, 2009 22:54:24
Lease Expires . . . . . . . . . . : Friday, October 16, 2009 22:54:24

C:\Documents and Settings\xxxxx>

I just pasted all the ipconfig in the post above that.

explain how you set up the ethernet card for your desktop.
Also details of the card.

Its a Realtek Ethernet card... I just put it into the slot of the PC, and the card was installed. The OS does recognize the card, but it just stays stuck at Acquiring Network Address...

post ipconfig /all data,
as given in Post No 7.
Check whether ethernet card is enabled.

just configure your modem to always on mode , for satisfactory working gave different ip address to wifi port in laptop and lan card ip for pc

Originally Posted by essbebe

post ipconfig /all data,
as given in Post No 7.
Check whether ethernet card is enabled.

Yes, the ethernet card is enabled, if it wasn't, the connection icon in the system tray would'nt show up. I've already posted the ipconfig data in the post.

Originally Posted by Unregistered

just configure your modem to always on mode , for satisfactory working gave different ip address to wifi port in laptop and lan card ip for pc

I'm not sure I understand how I'd give a different IP address to the wifi port in the laptop... I did set the IP address in the lan card for the PC, and the connection icon shows as connected, but no data transfer occurs. And, BTW, the lan card for the pc is a Realtek RTL8139 Family PCI Fast Ethernet NIC.

Well after being asked repeatedly to post the ipconfig data here, I decided to search on Google instead, and found the solution here:

vinuthomas.com >> Discussion Forum >> BSNL Dataone >> BSNL DataOne: Hardware >> Unable to connect to multiple systems using WA3002G4 modem

Managed to get it working now.

congrats.
The link you had given does not contain any new solution.
Specify how you "managed" to get the PC connected in LAN mode.
so that it will be helpful to me
to suggest to others with similar problem.

You seem to be averse to posting ipconfig /all data !
So I won't ask that !

how to enable DHCP on computer... i am using bsnl broadband on office computer..i have a laptop and iphone.. i need to connect my laptop and iphone thru wireless connection... but i dont know how to configure wireless connection on this modem ( UTStarcom WA 3002G4)... plzz help... i tried several times thru surfing various forums and their posts..but i dont know hot to activate DHCP on my computer... i tried going thru properties --- advanced -- internet connection setting sharing --- advanced -- services -- DHCP --- enable --- ok. but when i try to check thru cmd.exe it shows DHCP disabled.

Type 192.168.1.1 in your computer, ID and password admin. Browse through the pages, you will find the option to enable DHCP. On all PCs select " Obtain IP address automatically ". In the WAN page enable wifi. Thats all.

IMG : click
http://i23.tinypic.com/9b8wpg.jpg

Enable "UPnP" also.

If time permits see also WA3002-G4 link given below !

i did it.. but whenever i type it and click enter...it shows me cannot find server or connection interrupted.. i tried it after disconnecting and reconnecting it again...for your info.. i am already using the internet on my office computer but it is just i came to know that my modem have wifi facility as well that is why i wanted to connect it wid my laptop.

Dont click Save reboot in same lan page.
Go to Management
Select SAVE REboot option here .
Click
Wait for 2 minutes.

2.
Copy/paste this data here.
Procedure;
START RUN type cmd Ok
New window
type ipconfig /all

could u plzz explain in details where to go, to management option and which data to copy and paste.... do u want me to copy/paste my cmd.exe details here????

here is the image which has the details of ipconfig list... plzz help me out

i50 dot tinypic dot com slash 2exsc3d dot jpg

Please click the link WA3002-G4 given in my post. ( >14000 hits here, and reaching 10,000 hits in similar forum within 10 months )
2.
You have complete details, how to set the router for WIFI and access for settings for many similar modems/routers. ( more than 20)

3
Follow Chennai link.
If not go to MP link and download the FLASH application and see interactive method.
4.
Do not edit Ipconfig /all data. there is nothing to keep as secret here.
If you are on "DIALER"
mode change over to PPP/PPPoE mode.
(and enter userId/PW in wan page of router)

Presume you enabled DHCP earlier.

5. Confirm the WIFI icon appears in your Taskbar, connected or with a X mark/

6.
Check the discussion here , ( with some screenshots given by thread starter)
http://www.indiabroadband.net/showth...377#post286377