Page 1 of 2 12 Last
  1. #1
    Junior Member

    Join Date
    Sep 2009
    Posts
    1

    Default Beetel 450TC1 ADSL2+ Router

    Hi,

    I am not able to configure my Beetel 450TC1 ADSL2+ Router with bsnl broadband..Help required or manual needed for the router

  2. #2
    The Wizard
    meetdilip's Avatar
    Join Date
    Aug 2009
    Posts
    8,780

    Default

    Enter VPI/ VCI as 0/35, enter the user name and password.

  3. #3
    LEARNER

    Join Date
    Aug 2007
    Posts
    15,272

    Default

    Please try the websites given in th e link below. .
    Modem hardware board and pages may match.
    Please confirm.
    http://www.indiabroadband.net/bsnl-b...reference.html

    192.168.1.1 userid: admin password : password.

  4. #4
    LEARNER

    Join Date
    Aug 2007
    Posts
    15,272

    Default

    Error.450BX1 same as WA 3002-G4


    Beetel 450TC1 is same as Utstar WA3002-G1. compare.
    India Broadband Forum
    Check Port forwarding in portforward.com for WA 3002-G1
    and for your application ( Utorrent etc )

    Feedback.

  5. #5
    Junior Member

    Join Date
    Apr 2010
    Posts
    1

    Default beetel 450 tc1 router default password needed

    i had recently reset my beetel 450 tc1 router by pressing the button at the back and by going to 192.168.1.1 and resetting it.

    But now when i am trying to find the wireless network, it shows the router's default name as airtel and is not accepting 1234, admin, administrator, password or (blank/nothing) as the default paddword.

    anyone's help will be appreciated.

    thanks and regards
    Raunaq kadyan

  6. #6
    Junior Member

    Join Date
    Sep 2010
    Posts
    7

    Default beetel 450tc1 with bsnl broadband

    when I open 19.168.1.1 there VPI/VCI is mentioned as 0/32. I had tried to change it to 0/35 but it shows message that it cannot be updated as it's duplicate. also, although I have set modem in PPPoe/oa configuration still I have to enter USERNAME and PASSWORD to surf internet

  7. #7
    LEARNER

    Join Date
    Aug 2007
    Posts
    15,272

    Default

    scroll down in the box for 0 and 35. for BSNL>

  8. #8
    Junior Member

    Join Date
    Sep 2010
    Posts
    7

    Default

    I have tried to put VPI /VCI settings in MODEM page but with pvc0 it is not possible and if I change it to PVC2 then i can put VPI/VCI settings as 0/35 but still my problem remains same. also I want to know that what settings I have to give in my laptop( wifi card/lan card).?

  9. #9
    LEARNER

    Join Date
    Aug 2007
    Posts
    15,272

    Default

    what settings I have to give in my laptop( wifi card/lan card).?
    ,
    In your computer ( Presume you are on PPP/PPPoE mode )
    in Network setttings( if you had selected DHCP enabled in modem/router)
    select Ip address automatically under TCP/IP option.
    DNS also automatic or these entries.
    8.8.8.8 and 8.8.4.4 google dns
    or
    208.67.220.220 and 208.67.222.222 Open dns
    Apply SAVE.
    ( also same dns entered in modem/router menu page )

    Check WA3001-g1 in Calcutta Telephones web site- ( 220BXI also link below )

  10. #10
    Junior Member

    Join Date
    Nov 2010
    Posts
    1

    Default Did you get id and password or was able to login in to your router? How?

    Quote Originally Posted by raunaq View Post
    i had recently reset my beetel 450 tc1 router by pressing the button at the back and by going to 192.168.1.1 and resetting it.

    But now when i am trying to find the wireless network, it shows the router's default name as airtel and is not accepting 1234, admin, administrator, password or (blank/nothing) as the default paddword.

    anyone's help will be appreciated.

    thanks and regards
    Raunaq kadyan
    I am also unable to login in to router when I type 192.168.1.1 to configure my router. Can some one please let me know what should I do now. Till now I have not reset my router. The problem is that no default login id and password is working for it and I dont want to reset in fear of further messing up with the things.
    Best Regards
    Div

  11. #11
    LEARNER

    Join Date
    Aug 2007
    Posts
    15,272

    Default

    @divman
    unable to login in to router when I type 192.168.1.1
    Check my signature links.
    Check http://www.indiabroadband.net/broadb...tml#post284804
    no default login id and password
    If this unit is from Airtel try admin PW password.
    For settings:
    (a)Check WA3001-g1 in Calcutta Telephones web site-
    (b)
    with screen shots:
    http://mtnlmumbai.in/triband/htm/utstar_wireless_II.pdf

  12. #12
    Junior Member

    Join Date
    Dec 2010
    Posts
    1

    Default messed up

    I've tried all these steps. but this DNS error giving me serious headache..

    change this nasty router and buy new one.. i couldnt find its firmware update even..

  13. #13
    LEARNER

    Join Date
    Aug 2007
    Posts
    15,272

    Default

    but this DNS error giving me serious headache..
    copy/paste ipconfig /all
    and the modem page having dns entries.

  14. #14
    Junior Member

    Join Date
    Jan 2011
    Posts
    8

    Default

    Quote Originally Posted by meetdilip View Post
    Enter VPI/ VCI as 0/35, enter the user name and password.
    Hello Dilip,

    I am having a Beetel 450TC1 modem provided by Airtel. Now I am trying to configure that for BSNL. After entering VPI/ VCI as 0/35 I tried to save this but getting an error unable to save due to duplicate VPI/VCI.. For Airtel it is 1/32. Please advise on this.. I did a software reset in the Maintenance tab in the router configuration

    Quote Originally Posted by vikram123_us2002 View Post
    when I open 19.168.1.1 there VPI/VCI is mentioned as 0/32. I had tried to change it to 0/35 but it shows message that it cannot be updated as it's duplicate. also, although I have set modem in PPPoe/oa configuration still I have to enter USERNAME and PASSWORD to surf internet
    Hello Vikram.

    Even I face the same problem. I have a Beetel 450TC1 ADSL2 router provided by Airtel. Now I am trying that for BSNL. Is ur problems resolved. Kindly help me..
    Last edited by yourskarth; 11th January 2011 at 03:43 PM. Reason: Automerged Doublepost

  15. #15
    LEARNER

    Join Date
    Aug 2007
    Posts
    15,272

    Default

    are you getting a page like this ?
    Try PVC4 or 5
    Select
    Attached Images Attached Images

  16. #16
    Junior Member

    Join Date
    Jan 2011
    Posts
    8

    Default

    Yes Essebebe

    After changing the VPI/VCI to 0/32 for BSNL I am saving the page but it says Error could not save due to duplicate VPI/VCI..

  17. #17
    LEARNER

    Join Date
    Aug 2007
    Posts
    15,272

    Default

    VPI/VCI for BSNL is 0 and 35.
    If it says Duplicate entry check values for Virtual circuit 0 to 8 ( 8 links usually mode in "Bridged" ) and delete the duplicate entry.

  18. #18
    Junior Member

    Join Date
    Jan 2011
    Posts
    8

    Default

    Where to check this?

    Sorry it is already selected as PVC0. Can we change this?
    Last edited by yourskarth; 11th January 2011 at 10:55 PM. Reason: Automerged Doublepost

  19. #19
    LEARNER

    Join Date
    Aug 2007
    Posts
    15,272

    Default

    scroll the down arrow .
    PVC0. Can we change this?
    IF in PVC0 entry VPI 0 and VCI 35
    proceed further and SAVE reboot.

  20. #20
    Junior Member

    Join Date
    Jan 2011
    Posts
    8

    Default

    It is not allowing me to enter VPI/VCI 0/35 in Virtual circuit PVC0.

    I've tried disabling PVC0 and entered VPI/VCI as 0/35 and rebooted the router but it selecting only PVC0 by default..

    Please suggest

  21. #21
    LEARNER

    Join Date
    Aug 2007
    Posts
    15,272

    Default

    see this guide.
    http://mtnlmumbai.in/triband/htm/utstar_wireless_II.pdf

    List VPI/VCI entries for virtual circuits VPI0 to say VPI 7.
    Then select VPI ( FROM ABOVE ) having 0 AND 35.

  22. #22
    Junior Member

    Join Date
    Jan 2011
    Posts
    8

    Default

    I did that but when rebooting the router it takes PVCO by default

  23. #23
    LEARNER

    Join Date
    Aug 2007
    Posts
    15,272

    Default

    Then delete all vpi/vci entries from other links.

  24. #24
    Junior Member

    Join Date
    Jan 2011
    Posts
    8

    Default

    How to delete all VPI/VCI?

    There are 7 Virtual circuits PVC0 to PVC7. By default it takes PVC0 - It is configured for Airtel. I just tried to change the values in VPI/VCI but no joy. Tried resetting the modem by holding the Reset button for abt 20 sec on the rear of the router but no use. Is there any software to completly format the router settings?

  25. #25
    LEARNER

    Join Date
    Aug 2007
    Posts
    15,272

    Default

    did you download the manual?
    http://mtnlmumbai.in/triband/htm/utstar_wireless_II.pdf
    After selecting any VPI with 0 and 35
    Save Reboot as outlined in MTNL manual.

    If you can delete/make entries , you can save them also.
    Are you getting connected to BSNL in Dialer mode ?
    Did you try ?

  26. #26
    Junior Member

    Join Date
    Apr 2011
    Posts
    1

    Default

    now with any of passwords u cannot access ur beetel450tc1 router. if u have ur airtel account number try with it it will open. with out ur account number it wont open now a days just because of security reasons... uday

    try with ur airtel account number. with out dat u cannnot access ur wifi.. just because of the security reasons they r just doing lik dis, so try with ur airtel account account number it will open if any issues u can email me . its_uddi@yahoo.co.in.
    Last edited by uday; 19th April 2011 at 01:08 AM. Reason: Automerged Doublepost

  27. #27
    LEARNER

    Join Date
    Aug 2007
    Posts
    15,272

    Default

    beetel450tc1 router supplied by AIRTEL

    Even if you RESET the modem to factory settings ?
    usual admin PW password

    If from other isp's admin admin

  28. #28
    Junior Member

    Join Date
    Apr 2011
    Posts
    1

    Default Beetel 450TC1

    I got the same issue ,Beetel 450TC1 supplied by AIRTEL wont allow to set VCI to 35

    I finally upgraded the firmware and able to change the VCI setting to 35 to use for BSNL

  29. #29
    LEARNER

    Join Date
    Aug 2007
    Posts
    15,272

    Default

    @kirmut

    I have done settings on Beetel110TCI ( same as Beetel450TCI less wifi).

    The trick was to select the PVC which has 0 and 35 as default.
    it is usually PVC2..
    ( some modems allow you to delete the default links max 8 , configured for "bridged" mode default ).and enter fresh values.

    Will post screen shot of connection status later , if needed.



    Please mention which FW version you upgraded. one version( by AIRTEL) listed in my signature link 220BX.
    Attached Images Attached Images
    Last edited by essbebe; 23rd April 2011 at 07:52 PM.

  30. #30
    Junior Member

    Join Date
    Apr 2011
    Posts
    2

    Thumbs up solving

    even i had same problem but now its solved because i upgraded firmware!!!!
    u can get the firmware in 122.166.105.80/Firmwares/IPTV-FIRMWARE/FIRMWARE/BEETEL-450TC1/

    in the interface setup goto internet and then select pvc2 and user n pass n next

    advaced setup-vlan-deactivate and then it works fine

  31. #31
    Junior Member

    Join Date
    Jun 2011
    Posts
    3

    Default Try this !!!

    Quote Originally Posted by yourskarth View Post
    How to delete all VPI/VCI?

    There are 7 Virtual circuits PVC0 to PVC7. By default it takes PVC0 - It is configured for Airtel. I just tried to change the values in VPI/VCI but no joy. Tried resetting the modem by holding the Reset button for abt 20 sec on the rear of the router but no use. Is there any software to completly format the router settings?
    1. Press button 'summary' by the side of pvc0. You get what each pvc is preconfigured. set pvc window to that pvc. (probably one that has 0-35 without ppoe).

    2. you get pvc setup with 0-35 and down in the selections select ppoe/ppoa(probably default setting to bridge etc)

    Now try select default gateway, ip , no multiply etc and set you username and password(default might be 'password') as per BSNL allocation...

    wish you GoodLuck......

  32. #32
    LEARNER

    Join Date
    Aug 2007
    Posts
    15,272

    Default

    select deactivate button for PVC's not needed.http://www.indiabroadband.net/attach...1&d=1308673713
    Last edited by essbebe; 6th October 2011 at 06:50 PM.

  33. #33
    Junior Member

    Join Date
    Jul 2011
    Posts
    6

    Default Help me with Beetel 450TC1 ADSL2+ router

    Hi,

    I am facing same wireless configuration problem with Beetel 450TC1 ADSL2+ router connected to BSNL broadband. Where do I get the firmware for this and what steps should i follow to upgrade. My current firmware version is TM4-0Q-025. I think i need to downgrade it seems. In firmware page it asks for two files one firmware and another some rom file. Where do I find these two. Kindly help me

    Thanks in advance

    Quote Originally Posted by pbababab View Post
    even i had same problem but now its solved because i upgraded firmware!!!!
    u can get the firmware in 122.166.105.80/Firmwares/IPTV-FIRMWARE/FIRMWARE/BEETEL-450TC1/

    in the interface setup goto internet and then select pvc2 and user n pass n next

    advaced setup-vlan-deactivate and then it works fine
    Hi
    Even I am facing same problem. By the way what is that CAS or without CAS. And here I do get only one file. I think that is the firmware. But my modem's upgrade page asks for two files. One for firmware and another for some rom file. Where do I get the second i.e, rom file for these firmware? Please help me

    Thanks in advance
    Last edited by kanguy; 11th July 2011 at 04:40 PM. Reason: Automerged Doublepost

  34. #34
    LEARNER

    Join Date
    Aug 2007
    Posts
    15,272

    Default

    My current firmware version is TM4-0Q-025
    But my modem's upgrade page asks for two files
    please post as attachment screenshot of the menu page.

    2.
    I remember advising some member to use the SSID mngmr ( or something like that) and use the key 987654321 etc. .
    http://www.indiabroadband.net/broadb...tml#post331727

    There are two ssid key selection possible. Key No 1 as above.
    Another Key ssid No2. you can set with own SSID name/ key etc.
    3.
    I have the NON wifi version of the model.
    Downgrading the FW to earlier version has solved the problem for some user.
    Check FW versions in my sig link 220BX.
    ( CAS: conditional access system for IPTV ?)
    feedback.

  35. #35
    Junior Member

    Join Date
    Jul 2011
    Posts
    6

    Default

    Yes. In this it allows only 2 SSIDs and key no 1 can be changed, but again Authentication type is not allowed to touch in this. Here only wifi is the problem, i can access through lan properly. If I go for key no 2 everything is locked, thats what u mentioned as mgmnt something. there is a default key for that and we cannot change it. Please help me

    thanks
    Attached Images Attached Images
    Last edited by kanguy; 11th July 2011 at 07:04 PM.

  36. #36
    LEARNER

    Join Date
    Aug 2007
    Posts
    15,272

    Default

    Did you try the other default SSID and Key ? and connect in wifi mode ?

    Please delete FULL quote from your previous post.

    Romfile is for BACKING UP present setting to your harddisk.

  37. #37
    Junior Member

    Join Date
    Jul 2011
    Posts
    6

    Default

    yes. I had tried, but in vain. Ok. Now I got the one firmware here from a local guy. He had sent it thru mail. And now it is working. thanks for the support everybody. By the way, Are there any place where beetel modem's firmwares are available for download in their website.

  38. #38
    LEARNER

    Join Date
    Aug 2007
    Posts
    15,272

    Default

    Congrats.

    can you please upload the firmware file in megaupload web site ?
    what is the file size ? Fw version ?
    check my link 220BX.
    http://122.166.105.80/Firmwares/IPTV...BEETEL-450TC1/
    Last edited by essbebe; 11th July 2011 at 08:00 PM.

  39. #39
    Junior Member

    Join Date
    Jul 2011
    Posts
    6

    Default

    FW version is Beetel4-0Q-016. It is 1.3 mb in size. I will try to upload it. So there are no such sites where one can find latest firmwares for beetel modems? And I dont know how to visit ur 220Bx link. please send me the link. Oh the link you have given is from Airtel. But beetel doesnot give any of its firmwares over the net? what a negligence about customers? But any reason why megaupload?

    Hey i am unable to post the link here. sorry. Its not allowing me to post the link
    Last edited by kanguy; 11th July 2011 at 08:08 PM. Reason: Automerged Doublepost

  40. #40
    LEARNER

    Join Date
    Aug 2007
    Posts
    15,272

    Default

    Beetel link given.in post no 30 No 38 my sig link 220BX
    http://www.indiabroadband.net/broadb...mpilation.html

  41. #41
    Junior Member

    Join Date
    Jul 2011
    Posts
    6

    Default here is beetel 450tc1

    hi please join this properly to make it a link www megaupload.com / ? d=BH706E9B. to get the beetel 450tc1 firmware. Its version is Beetel4-0Q-016. and its size is 1.30 mb.

  42. #42
    LEARNER

    Join Date
    Aug 2007
    Posts
    15,272

    Default

    Thanks for uploading firmware , on my request.
    MEGAUPLOAD - The leading online storage and file delivery service
    to get the beetel 450tc1 firmware.
    Its version is Beetel4-0Q-016. and its size is 1.30 MB.
    downloading it for future use.



    Please check your USERCP.

    Rep +++ 24 points to @kanguy
    Attached Images Attached Images
    Last edited by essbebe; 11th July 2011 at 10:09 PM.

  43. #43
    Junior Member

    Join Date
    Jun 2011
    Posts
    3

    Default WirelessSetup

    Quote Originally Posted by kanguy View Post
    Yes. In this it allows only 2 SSIDs and key no 1 can be changed, but again Authentication type is not allowed to touch in this. Here only wifi is the problem, i can access through lan properly. If I go for key no 2 everything is locked, thats what u mentioned as mgmnt something. there is a default key for that and we cannot change it. Please help me

    thanks
    As usual go to Modem/router setup (Hope you are working with modem in wired condition)

    Select Interface /Wireless setup

    Please confirm the following are set/notset.

    SSID : index 1

    SSID: ---Your Choice ssid----(make note)

    Broadcast SSID: YES

    Authentication type : TKIP

    Pre-shared Key : (Make a phrase of 13 Charecters A-Z, 0-9 and note
    and enter here)

    WPA Group Rekey interval : 0

    Wireless MAC Address Filter : SELECT "DeActivate"

    <Save > and Wait for save to complete..

    Select Maintenance on the Main menu....

    <Click Restart with the CURRENT SEETINGS>

    ON THE COMPUTER SIDE....(hope you are not working in windows 7 .... if so you might have to ensure your wireless is on when trying to connect wireless)

    Select "Connect to "

    Select from the list of wireless network your Username.

    You enter the noted SSID

    enter your security phrase if you are prompted....Otherwise select security and enter the security selection.

    Now you will get your wireless GOIng....Hope this helps you...

    Happy wireless...

    In case of difficulty post me back...

    Happy wireless.....

  44. #44
    Junior Member

    Join Date
    Jul 2011
    Posts
    6

    Default Problem solved

    I think you haven't read through my post properly. The steps you mentioned are known to me. But problem was that I couldnot change anything in your step No. 4 and because of that I cannot do further 2 steps mentioned by you. Actually earlier I had configured wireless router with some other make than beetel 450tc1, so these were known. But my problem was that entries where I should set proper values were disabled there by making it unusable for wireless. But anyhow right now it is solved by updating (in fact it was downgrading rather than an upgrade thats why I said update) firmware by an older version. Anyhow thanks for your help.
    Last edited by kanguy; 15th July 2011 at 08:42 PM. Reason: forgot to mention that problem was solved

  45. #45
    Junior Member

    Join Date
    Jun 2011
    Posts
    3

    Default

    Quote Originally Posted by kanguy View Post
    I think you haven't read through my post properly. The steps you mentioned are known to me. But problem was that I couldnot change anything in your step No. 4 and because of that I cannot do further 2 steps mentioned by you. Actually earlier I had configured wireless router with some other make than beetel 450tc1, so these were known. But my problem was that entries where I should set proper values were disabled there by making it unusable for wireless. But anyhow right now it is solved by updating (in fact it was downgrading rather than an upgrade thats why I said update) firmware by an older version. Anyhow thanks for your help.
    Hi,
    Just I have forgotten to check your choice of Authentication type...Anyway, please check CWMP in your modem is disabled.

    TM4-0Q-020-20100628(with-without CAS) is probbly the reliable firmware for BSNL applications.

    Anyway, happy that your wireless is on....Congrats...!

  46. #46
    LEARNER

    Join Date
    Aug 2007
    Posts
    15,272

    Default

    @Ravij

    Just I have forgotten to check your choice of Authentication type...Anyway, please check CWMP in your modem is disabled...
    not related to the problem of wifi settings.

    TM4-0Q-020-20100628(with-without CAS) is probbly the reliable firmware for BSNL applications.
    problem was solved by downgrading the FW.

    Please see post No 37 and 36 (FW used Beetel4-0Q-016)

  47. #47
    Junior Member

    Join Date
    Jul 2011
    Posts
    1

    Smile Beetel 450 TC1 problem with BSNL...

    Thnx essbebe and mandster for their help...

    I downgraded the beetel firmware to 0Q 020 and problem get solved..

    I updated PVC0 with 0/35 and my user id & password... & now i can surf the net... thnx once again for ur precious comments nd replies...

  48. #48
    Junior Member

    Join Date
    Aug 2011
    Posts
    1

    Default

    HI

    I am not able to configure my Beetel 450TC1 ADSL2+ Router with bsnl broadband..Help required or manual needed for the router[/QUOTE]

  49. #49
    LEARNER

    Join Date
    Aug 2007
    Posts
    15,272

    Default

    first try LAN mode. see these screen shots from my 110TCI.
    confirm you get connected to Internet>
    Last edited by Admin; 16th March 2012 at 04:49 PM.

  50. #50
    Junior Member

    Join Date
    Nov 2011
    Posts
    1

    Default :((

    tried all dat has been suggested, including firmware update..! still d connection s nt gettin dvelpoed..! (

  51. #51
    LEARNER

    Join Date
    Aug 2007
    Posts
    15,272

    Default

    @imfootloose
    At least you could have mentioned the present FW version.
    Post Status connection info for PVC0 or PVC2 vpi/vci 0 and 35.
    Save as screen shot and upload here as attachment.
    ( Go Advanced /Scroll down / MANAGE attachments )

    (Example page:
    http://www.indiabroadband.net/attach...tatus-bott.jpg

    procedure : step by step By @vahid.
    http://www.indiabroadband.net/relian...liance-bb.html
    Last edited by essbebe; 4th November 2011 at 09:44 AM.

  52. #52
    Junior Member

    Join Date
    Dec 2011
    Posts
    4

    Default

    Quote Originally Posted by kanguy View Post
    yes. I had tried, but in vain. Ok. Now I got the one firmware here from a local guy. He had sent it thru mail. And now it is working. thanks for the support everybody. By the way, Are there any place where beetel modem's firmwares are available for download in their website.
    I have similar modem I have downloaded the fW Beetel4.0Q16. Now how do i upgrade. Please send me the steps to configure. I have taken the backup of previous settings on to my desktop. When I select and browse ras file and upgrade...status is (Upgrade is in progress please wait) and iy stays there for quite long time. IS there any standard procedure to upgrade?

    Regards,

    Sameer

  53. #53
    LEARNER

    Join Date
    Aug 2007
    Posts
    15,272

    Default

    In such a big thread with 53 posts, just asking for FW upgrade, without mentioning the problem you faced or the present FW in use is not helpful.

    Usually in this modem if a wrong file is loaded ( usually *.ras accepted )
    or a corrupt file is loaded , you get a failure message.
    Post details.
    Attached Images Attached Images
    Last edited by essbebe; 11th December 2011 at 05:16 PM.

  54. #54
    Junior Member

    Join Date
    Dec 2011
    Posts
    4

    Default

    Authentication type is disabled at WPA2 Enterprise and asks usrname and password and I cannot connect to WIFI. LAN is working and I can browse internet. Current Firmware I use is TM4-0Q-025. I was refering to earlier post and found downgrade is the solution. Downloaded the firmware Beetel4-0Q-016 from Megaupload
    Attached Images Attached Images

  55. #55
    LEARNER

    Join Date
    Aug 2007
    Posts
    15,272

    Default

    TM4-0Q-025.
    OPTION 1 :
    Select SSID as Elite ( changed by you ?) and use the WPA key shown ( greyed )
    which you have blanked in your screen shot.
    Default SSID could have been AIRTEL or MNGMT

    Test : confirm SSID(Elite) appears in Computer WLAN page
    and you can use the key and get connected to Internet.

    Option 2 :
    Select SSID2 and enter new SSID name and enter security key.
    ( Maximum 4 SSID's possible. Consider SSID1 as default )

    Option 3 :
    Firmware update later.


    Feedback.

  56. #56
    Junior Member

    Join Date
    Dec 2011
    Posts
    4

    Default

    Quote Originally Posted by essbebe View Post
    TM4-0Q-025.
    OPTION 1 :
    Select SSID as Elite ( changed by you ?) and use the WPA key shown ( greyed )
    which you have blanked in your screen shot.
    Default SSID could have been AIRTEL or MNGMT

    Test : confirm SSID(Elite) appears in Computer WLAN page
    and you can use the key and get connected to Internet.

    Option 2 :
    Select SSID2 and enter new SSID name and enter security key.
    ( Maximum 4 SSID's possible. Consider SSID1 as default )

    Option 3 :
    Firmware update later.


    Feedback.
    Default SSID was Airtel enabled Authentication type WPA2 Enterprise, I changed to custom name Eliet but cannot change Authentication type (greyed).

    Test : confirm SSID(Elite) appears in Computer WLAN page
    and you can use the key and get connected to Internet.

    Result: Elite Network is visible in my Computer WLAN Page. Connection failed, Not sure what Username and Password I should give

    OPtion 2:
    SSID2 :MGMNT status shows connected after entering default security key but cannot browse internet.

  57. #57
    LEARNER

    Join Date
    Aug 2007
    Posts
    15,272

    Default

    TM4-0Q-025. default SSIDs problem

    Please avoid full quote for message/post.immediately preceding yours.

    For AIRTEL changed to Elite try WEP key 0987654321 enter in computer page.
    If failed, confirm LAN mode is working.

    When I select and browse ras file and upgrade...status is (Upgrade is in progress please wait) and it stays there for quite long time. IS there any standard procedure to .....
    Probably corrupt file.
    It is very easy to suggest FW update, but want to make sure. sorry for
    the tests.

    Try to delete all entries in radius server menu. SAVE. Reboot from current settings.

  58. #58
    Junior Member

    Join Date
    Dec 2011
    Posts
    4

    Default Tm-0q-025

    I cannot change to WEP Authentication type and enter the key. Authentication type box is disabled wondering if the upgrade can release the lock and select WEP authentication and give my own WEP security key.

  59. #59
    LEARNER

    Join Date
    Aug 2007
    Posts
    15,272

    Default

    TM4-0Q-025. default SSIDs problem START POST NO 54.

    You have to enter the key in Computer page 0987654321 worked for me
    ( Maximum radius of wifi working less than 40 feet(*conditions apply !) )

    FIRMWARE CHANGE
    (A)

    TM4-OQ-008

    (B)


    select without CAS/IPTV.


    [C)
    http://www.megaupload.com/?d=BH706E9B Beetel4-OQ-006.

    Last edited by Admin; 16th March 2012 at 04:51 PM. Reason: removed dead links

  60. #60
    Junior Member

    Join Date
    Dec 2011
    Posts
    1

    Default adsl2+router - Bsnl connection

    Hi....


    Thanks a lot....
    I too had same issues....
    Tried all the permutation and combinations...
    But this firmware downgrade clicked...

    Thanks once again...

Page 1 of 2 12 Last

Similar Threads

  1. Using Beetel 450tc1 adsl2+ Router With Reliance Broadband
    By kumarjai in forum Reliance Broadband
    Replies: 3
    Last Post: 6th March 2013, 09:41 PM
  2. Beetel 450TC1 ADSL2+ Router hangs
    By a8j8i8t8 in forum BSNL broadband
    Replies: 0
    Last Post: 23rd July 2012, 12:22 PM
  3. Replies: 21
    Last Post: 18th July 2012, 02:29 PM
  4. Internet not working with Beetel 450TC1 ADSL2+ Router
    By nagaraj.chk in forum BSNL broadband
    Replies: 18
    Last Post: 21st April 2012, 11:42 PM
  5. Beetel 450TC1 ADSL2+ Router dhcp problem
    By copycat221 in forum Airtel Broadband
    Replies: 12
    Last Post: 14th January 2010, 02:44 PM

Posting Permissions

Log in

Log in
BSNL Broadband Forum Airtel Broadband Forum Reliance Broadband Forum Tikona Broadband Forum MTNL Broadband Forum Tata Broadband Forum
BSNL 3G Forum MTNL 3G Forum Idea 3G Forum Airtel 3G Forum Reliance 3G Forum Vodafone 3G Forum
Airtel Mobile Forum Reliance Mobile Forum BSNL Mobile Forum Idea Mobile Forum Vodafone Mobile Forum Aircel Mobile Forum
Tata Sky Forum Dish TV Forum Reliance DTH Forum Videocon DTH Forum Airtel DTH Forum SUN DTH Forum