Thread: Unable to access modem page

Hello everybody.

I have a peculiar problem. I have been trying to access the modem page using 192.168.1.1 but was unable to do so. Today I have installed Windows 7 and was perplexed when the TCP/IP window showed IPv6 addresses required. I am clueless in these matters and request your help in asmuch detail as possible.

I have a mobile and 2 laptops with wi-fi capability but sadly I am unable to use it in my home network as the modem has been configured to work with my desktop. I need help to get wi-fi settings enabled on my modem and more importantly to access the modem settings page.

Any help will be greatly appreciated. My modem is 'UStarcom' WA3002G4 model... If that is of any help. Thank you.

May be you will find this useful

http://www.indiabroadband.net/broadb...onnection.html (Solution for multiple machines connecting to same BB connection)

Start > run > cmd > ipconfig/all, post the screen shot.

Go to TCP/IP and assign the following Ip address, for sure you will be able to access the modem configuration page.

Uncheck TCP/IPv6

Start IP Address: 192.168.1.2
End IP Address: 192.168.1.254

You can give any value from start to end ip address above.



FOR TYPE 2 MODEM- WA 3002 G4

Modem configuration

Go to LAN settings, assign IP address
192.168.1.10, subnet 255.255.255.0, gateway
as 192.168.1.1. Reboot PC and try again

go to run>cmd>ipconfig copy the address in default gateway.
o to internet exploer and write that address hit enter..put id, password as 'admin' & 'admin' and u can configure it now...

u don't have to put 192.168.1.1 always, u have to simply put your default gateway in ur browser's address...

:12::44:

Disable IPV6 in network settings pages.
both LAn and wlan.
Enable DHCp.
In all systems TCp/IP properties select
Obtain ip address automatically.

BHARAT SANCHAR NIGAM LIMITED