Results 1 to 13 of 13

Thread: for nokia siemens sl2_141 modem users

  1. #1
    Junior Member
    Join Date
    Aug 2009
    Liked
    0 times
    Posts
    17

    Default for nokia siemens sl2_141 modem users

    for nokia siemens sl2_141 modem users
    i want the settings of nokia siemens sl2_141 modem,
    'coz i don't get enough speed as you people and i'm
    unable to port forward in bitcomet or utorrent. I get
    60-70kb with rapidshare and 40-50kb in bitcomet.
    if you have this modem u can help me...

    1. go to 192.168.1.1/main.html, id & password is 'admin'
    and 'admin'.
    2. click on management than click on backup settings on right side,
    save on desktop.
    3. you can mail that settings to rencon0@gmail dot com


    thanxxxxx.:clap::clap::clap::clap:

  2. #2
    LEARNER
    Join Date
    Aug 2007
    Liked
    20 times
    Posts
    15,291

    Default

    1.Did you check in Portforward.com ?
    2..If you are on "Dialer" mode Advanced Options in Nat
    will not appear. only DMZ option. All ports open.

    3.Deselect "Bridged' and
    4.Select "Always On " ppp/PPPoE and enter your UserId/PW
    in wan page.

  3. #3
    Junior Member
    Join Date
    Aug 2009
    Liked
    0 times
    Posts
    17

    Default

    no effect..

    tried all

  4. #4
    LEARNER
    Join Date
    Aug 2007
    Liked
    20 times
    Posts
    15,291

    Default

    post as annexure
    jpg picture your settings for virtual server or port triggering.

    Additional reference;
    http://www.indiabroadband.net/bsnl-b...reference.html (Sl2-141 portforwarding quick reference.)

    for torrents: from Google cache.
    http://74.125.113.132/search?q=cache...ient=firefox-a
    Last edited by essbebe; 09-20-09 at 09:36 AM.

  5. #5
    Junior Member
    Join Date
    Aug 2009
    Liked
    0 times
    Posts
    17

    Default

    these are the printscreens of my modem configurations,

    adsl statistics.jpg

    device info.jpg

    dmz host.jpg

    port triggering.jpg

    virtual servers.jpg

  6. #6
    Junior Member
    Join Date
    Aug 2009
    Liked
    0 times
    Posts
    17

    Default

    waninfo.jpg

    i tried a lot of tricks but didn't succeded..
    i think there's some problem with vista...

  7. #7
    Gold Member
    Join Date
    May 2008
    Age
    29
    Liked
    0 times
    Posts
    756

    Default

    rencon0 Your download rates are very low Downstreen 633Kbps. Thats why you dont getting the full download speed.Not only you are suffering from this problem. Some other member also have this problem.Their port speed set to very low like 1Mbps.
    But I think your port speed dont set to low. Your are getting Downstreen 633Kbps because your SNR Margin both are very low. Shows in your screenshot 6db. Thats why you getting the Downstreen 633Kbps. Cheak your phone line have some disturbance. Cheak it.
    For getting full 2Mbps your Downstreem should be shows to you 2048Kbps or higher then it.

  8. #8
    LEARNER
    Join Date
    Aug 2007
    Liked
    20 times
    Posts
    15,291

    Default

    Please edit all your pictures and reduce the size.
    to fill 3/4th of the page..
    scrolling is tiresome.

    Use same Ip 192.168.1.2
    Try Mod mode GDmt.
    Your BB connection is poor.
    Are you far away from the Exchange ?

  9. #9
    Junior Member
    Join Date
    Aug 2009
    Liked
    0 times
    Posts
    17

    Default

    yes u r right, i m a bit far from the exchange...
    is there any software or hardware which can enhance my signals...

  10. #10
    Platinum Member
    Join Date
    Feb 2008
    Liked
    0 times
    Posts
    2,766

    Default

    i think there is something wrong with your LINE , those sync rates are not standard rates , i had similar sync rates at one point of time and that ended up being a LINE problem and i had to get my line replaced.. do you face any disturbances in the telephone line?

  11. #11
    Junior Member
    Join Date
    Aug 2009
    Liked
    0 times
    Posts
    17

    Default

    which line r u talking abt, the wire from the box outside each house or the line from the pole...
    the pole is 200m away from my house and the line is digged underground to my house, i'm only internet user in this 200m area so the speed should be fast enough but the case is vice versa.. and the lineman doesn't know much abt these things...
    i don't know what to do now?????

    Bsanal sucks:44::44::44::44::44::44::44:
    Last edited by rencon0; 09-22-09 at 08:15 AM. Reason: Automerged Doublepost

  12. #12
    LEARNER
    Join Date
    Aug 2007
    Liked
    20 times
    Posts
    15,291

    Default

    yes u r right, i m a bit far from the exchange.
    "a bit far' can mean 1 Km 2 Km 3 Km or even 500 meters.
    Your answers should be specific in a technical forum.
    Post SNR data page with Mod changed to GDMT.

    Para two :
    Any reference to Telephone Junction is the
    ONE available in your house.
    You cannot go to the POLE and make changes!
    Same thing applies to Electric power supply also.!

    Recheck all Rj11 cables in your house for blackening/oxidization/
    high resistance contacts, intermiitent joints etc.
    Your task is to improve the SNR and reduce the attenuation.
    If all efforts fail,
    Go and meet the J.T.O with the modem/router and explain the
    present status.

  13. #13
    Junior Member
    Join Date
    Aug 2009
    Liked
    0 times
    Posts
    17

    Default

    i'm around 5km away from exchange and 200m from the pole..

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •