HUAWEI MT841 wireless adapter problem hello frnds,
i have a bsnl broadband connection. recently i replaced my typeI modem with HUAWEI MT841. after configuring it with the help of a post of this forum.
everythings work fine. i am able to connect to internet through PC. but whenever i use the modem with wireless adapter, link is lost in about 10 minutes.
what shud i do? is there anything wrong with the configuration?? plz help me out.
contact customer care of the wireless adapter for proper configurtion..........!:12:Originally Posted by nims11
1Change Mod to GDMT if it is adsl2+ now.____________________________
Use OpenDNs 208.67.220.220 and 208.67.222.222________________________
When ever you loose wireless Link
click the WIFI icon and select Repair .
What is the error message ?________________________________________-
there is no error message,
the the modem never catches a link when i insert my card, even when it does it is very unstable. the modem works normal without card.
reply not clear.
The card you insert in MT841 is the WLAN Is TX (say transmitter/receiver)
The wireless in your laptop/desktop is the RX ( say Receiver/Transmitter)
For an unstable WIFI connection, keep the router as near as possible to your Computer.
Change the Channel to 6 or 11.
Change Mod to GDMT.
In single computer use only LAN connection or WIFI mode.
Not both.
Para two:
If possible exchange or get on rent
a new 3 in one ADSlmodem/router/WIFI
from Bsnl such as siemen's sl2_141 or WA3002-g4
or zte zxdsl 531B, or Wa3002_g1, which ever available.
.
let me make it clearer....
1> i hav a Huawei MT841 connected to a PC via lan.
2>i hav a huawei MT841 compatible wireless adapter.
3>I configured it after following various tutorials at web.
4>when i run my modem without inserting the wireless adapter, everything works fine and i am able to connect to internet on my PC.
5>when i run my modem with wireless adapter inserted, it is not able to find link and even when it does rarely, it loses it again in few minutes and never comes back until i restart my modem after ejecting the adapter.
have you tried suggestions in my earlier Post ?
When you loose connection either the modem
adapter is intermittent/or your computer's
lancard is intermittent.
Then click the icon and check "
"Available wireless networks"
the icon can also have a X mark.
Post from summary page Mod selected
snr/attn D/L U/L icons
line speed
net speed data.
whats the signal strength? how far away from router?
Please check the power rating of your adapter.
Is it 230V `~ AC secondary 12V~ AC at about 1.2 Amp
or 230V`AC secondary 12V = DC at about 1.2. Amp
with additional card power requirements might have increased.
Check whether it gets too hot.
i followed your suggestion.
but now a new problem has arised.
modem catches link only when either
1>it is connected to the computer via LAN wire and the wireless adapter is not inserted.
2>only wireless adapter is inserted and the modem is not connected to any PC via lan wire
modem doesnt catch link when both wireless adapter and lan wire is used.
1.modem doesnt catch link when both wireless adapter and lan wire is used
How many computers desktop/laptop in use ?
2.Post screen shot as jpg annexure here.
The top half of the MT841 Summary page.
showing mod selected/snr/attn line speed line rate both d/L and U/L.
3. Post ipconfig /all data.
RUN type cmd OK
new window
Typeipconfig /all
Copy paste data here. Do not edit.
For both LAN and Wlan.
How many computers desktop/laptop in use ?
post data for Wireless lan.
Your SNR/Attn figures are bad.
Check your line.
Read post fully.
one PC and one laptop and one PSP
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote
