India Broadband

lavakusareddy

Hai Everybody,
Iam new to this group,how i can autodail my modem in a connected LAN environment.can anyone pls help me.

mmm

pls see this : mt841 guide (how to configure BSNL Type IV (MT841) modem for autodail and wireless setup.)

chitkiran

Modem must be connected to the pc,and the lan card is to be configured with the ipaddress 192.168.1.- ,since the default ip address of the huawei is 192.168.1.1,make the ipaddress of the nic as 192.168.1.2 say for eg.

try type in browser ie or firefox ,http://192.168.1.1

you will be prompted to a login page,enter as

username:admin
password :admin

go inside as you said the connection is bsnl,so the protocol pppoe is activated,inside the settings check connection settings ,make it as automatic,
and save changes , and restart the modem

DONE!!!!!!!!!!!!!!!!!1

when ever you switch on the modem it will dial automatically

Hope fully it will help you

lavakusareddy

can any tell the steps from intial to last.assume that i am new to bsnl broadband.how can i connect to net,how can i configure the modem settings.how can i configure the ip,lan,dns,so on.

from u'r response i can verify if i can do anything wrong.so,pls reply to my post.

mmm

^ you are connecting to the net in bridge mode of
the modem . are you facing any disconnections ?

step by step procedure is given in the above link ;
or see this document : MT841 configuration

if you have any specific queries , pls post here with
details . someone will try to respond .

btw , I sent a mail to you .
No response from you friend !

lavakusareddy

iam in pppoe mode.iam facing discontunities.

mmm

^ Did you enable DNS entries in the modem ?
primary dns address : 61.1.96.69
secondary dns address : 61.1.96.71

and select always on for Max Idle Time

setting changes should be saved in modem
after changing any values in the modem ;
then restart modem ...

lavakusareddy

it set correct values for DSN.where i can set Max Time property

mmm

^ oops: Max Idle Time setting is not in MT 841 ...

Links are given to configure MT841 instead of
copying & pasting the same setup information .

If the instructions are followed correctly and still you
face disconnection problems then there might be a
problem with your phone cable . And you have to give
a written complaint at the Local BSNL Exchange .

dmns

Can any one help me configure Huawei MT841 (BSNL Broadband) with Linksys wrt54G