Thread: help me configure UT300R2U with linksys WRT54G

i saw old guide but was unable to find dhcp option i am struck there please help me


my UT300R2U firmware is :-

3.08.BSNL_02.01.02_tr64

Refer this:

Setup of UT-300R2 with Linksys WRT54G

it is old guide i said in my post new firmware is different no dhcp option i see

192.168.1.1/main.html

Advanced
LAN look here for DHCP.
http://i23.tinypic.com/9b8wpg.jpg

Originally Posted by essbebe

192.168.1.1/main.html

Advanced
LAN look here for DHCP.
http://i23.tinypic.com/9b8wpg.jpg

i checked it already there is no dhcp option shown in that page only ip address and subnet mask are shown

Are you on Dialer Mode ?
try PPPoE "Always On " Mode.
In Browser address i get different screens.
192.168.1.1/lancfg.html UPNP missing dhcp available.
192.168.1.1/lancfg2.html same screenshot posted earlier. DHCP and mac available

Para two:
You can enable DMZin Ut300r2u and and enable DHCP in linksys.