India Broadband Forum

anandsaju · 01-09-09, 05:40 PM

I have configured Airtel Beetel 220BX modem for BSNL and it is working fine. I followed the steps mentioned here. I am using the splitter provided by the BSNL. But when i change the splitter to Beetel(provided by airtel), there is no signal and the LED's are also not glowing.
I have only set up the PPPoE connection. Did I miss anything or I need to change the splitter. Please help.

Thanks,
Anand

just4kix · 01-15-09, 05:21 PM

Quote:

Originally Posted by anandsaju

I have configured Airtel Beetel 220BX modem for BSNL and it is working fine. I followed the steps mentioned here. I am using the splitter provided by the BSNL. But when i change the splitter to Beetel(provided by airtel), there is no signal and the LED's are also not glowing.
I have only set up the PPPoE connection. Did I miss anything or I need to change the splitter. Please help.

Thanks,
Anand

Splitter may be malfunctioning. If you already have a splitter that is working, there is no reason to change it or buy a new one.

essbebe · 01-15-09, 06:01 PM

Quote:

Beetel 220BX modem for BSNL and it is working fine.

http://i34.tinypic.com/s4c0me.jpg
Check rj11 cables connected properly.
"Funjin "( BSNL) splitter ports are not same.
(reverse)
line ====>>> adsl (left) & phone ( right port )

"beetel" Adsl splitter ( white)
UP " beetel" name left to right
adsl port ( left) LIne ( right )==>PHONE ( singleport)

Using same splitter for the past two years,
for both Airtel and Bsnl BB.
You can/should use the spare for an extension phone
in another room ( if Phone line is concealed wiring )

manjupelle · 01-15-09, 11:57 PM

Hi all,

I'm trying to configure ppoe for beetel modem but unable to complete getting error in Diagnostics:

Test the connection to your DSL service provider:
-------------------------------------------
Test ADSL Synchorization: PASS
Test ATM OAM F5 segment ping: FAIL
Test ATM OAM F5 end-to-end ping: FAIL
-------------------------------------------

Test the connection to your Internet service provider:
-------------------------------------------
Test PPP Server connection: FAIL
Test authentication with ISP: PASS
Test the assigned IP Address: FAIL
Ping Default gateway: PASS
Ping primary DNS: PASS
-------------------------------------------

AND ALSO WHEN IN CHECK THE WAN CONNECTION UNDER DEVICE INFO IT SHOWS AS :

--------------------------------------------------------------------------------------
0/35-off -1 -UBR -BSNL -ppp_0_0_35_1 -ppoE -Enabled -Disabled -Enabled -Up -59.92.134.117(Disconnect)
-------------------------------------------------------------------------------------
i have also done the same setting as mentioned :
-------------------------------------------------------
1. First login to your Router using default username and password

2. Click on WAN on the left side menu

3. You'll have options to add or remove configurations.

4. Please select and remove the bridge config as BSNL does not support Bridge.

5. Please click edit on the existing PPPoE Airtel Configuration

6. Set the VPI=0 and VCI=35 (for Airtel it would be 1,32) and click next

7. Select PPP over Ethernet (PPPoE) and encapsulation type: LLC/Snap Bridging and click next

8. Enter the following details:

PPP Username: Your bsnl username (no need to add dataone.in)

PPP Password: Your bsnl password

PPPoE Service Name: DataOne

Authentication Method: Select CHAP

Click Next

9. Check the Enable IGMP Multicast Option

Check Enable WAN Service Option

Enter the Service Name as BSNL

10. Click Next and Save. You should also save and reboot your modem.

And Lo... you can now browse through BSNL broadband!!
-------------------------------------------------------
Waiting for reply......

essbebe · 01-16-09, 10:40 AM

@manjupelle
User @anandsaju said

Quote:

I have configured Airtel Beetel 220BX modem for BSNL and it is working fine.

Problem/discussion is about Splitter use.

Para two:
Kindly address target user example as @essbebe.
I think you are giving a solution,/instructions for Beetel 220BX. for everybody's use. Thanks.

OR

If having still problem connecting
post ipconfig/all data
START/ RUN type cmd type ipconfig/all

yogesh gauria · 01-16-09, 04:51 PM

Hello I am willing to go for BSNL internet services is it ok. And what is the cost.

essbebe · 01-16-09, 06:37 PM

Bharat Sanchar Nigam Ltd.

SELECT ACCORDING TO YOUR USAGE/budget/time that can be spent on Internet/special interest movies/music/ chat/ etc.

If you need unlimited UL750 plan at 256Kbps
Home Flexi 350 Home UL 750 Home UL 750 Plus

For faster speed Home 500 series speed upto 2 Mbps
Home 125 Home 250 Home 500 Home 1000.

etc

superprash2003 · 01-16-09, 08:49 PM

@yogesh
if you really want to know how good BSNL is .. its best to ask people around you who use it .. As in some areas they have really bad server and customer support .. whereas in other areas , its really good!!

gthegde@gmail.com · 05-27-09, 07:11 PM

Quote:

Originally Posted by manjupelle

Hi all,

I'm trying to configure ppoe for beetel modem but unable to complete getting error in Diagnostics:

Test the connection to your DSL service provider:
-------------------------------------------
Test ADSL Synchorization: PASS
Test ATM OAM F5 segment ping: FAIL
Test ATM OAM F5 end-to-end ping: FAIL
-------------------------------------------

Test the connection to your Internet service provider:
-------------------------------------------
Test PPP Server connection: FAIL
Test authentication with ISP: PASS
Test the assigned IP Address: FAIL
Ping Default gateway: PASS
Ping primary DNS: PASS
-------------------------------------------

AND ALSO WHEN IN CHECK THE WAN CONNECTION UNDER DEVICE INFO IT SHOWS AS :

--------------------------------------------------------------------------------------
0/35-off -1 -UBR -BSNL -ppp_0_0_35_1 -ppoE -Enabled -Disabled -Enabled -Up -59.92.134.117(Disconnect)
-------------------------------------------------------------------------------------
i have also done the same setting as mentioned :
-------------------------------------------------------
1. First login to your Router using default username and password

2. Click on WAN on the left side menu

3. You'll have options to add or remove configurations.

4. Please select and remove the bridge config as BSNL does not support Bridge.

5. Please click edit on the existing PPPoE Airtel Configuration

6. Set the VPI=0 and VCI=35 (for Airtel it would be 1,32) and click next

7. Select PPP over Ethernet (PPPoE) and encapsulation type: LLC/Snap Bridging and click next

8. Enter the following details:

PPP Username: Your bsnl username (no need to add dataone.in)

PPP Password: Your bsnl password

PPPoE Service Name: DataOne

Authentication Method: Select CHAP

Click Next

9. Check the Enable IGMP Multicast Option

Check Enable WAN Service Option

Enter the Service Name as BSNL

10. Click Next and Save. You should also save and reboot your modem.

And Lo... you can now browse through BSNL broadband!!
-------------------------------------------------------
Waiting for reply......

I tried so many things as per your instruction, but im still unable to connect to dataone through Beetel 220BX ADSL router. it is still showing ADSL link DOWN
Please anyone help me to solve the problem

essbebe · 05-27-09, 07:31 PM

Follow the screen shots.
SAVE reboot . Wait for two minutes.
User Id no need to add @ datone in or @ bsnl.in
New Page 1

If all Ok BSNL Gateway will appear in the last screen shot.i as shown in above link. pages.

Feedback.
If still problem :
Post data:

Start RUN type cmd type ipconfig /all

Quote:

Test ATM OAM F5 segment ping: FAIL
Test ATM OAM F5 end-to-end ping: FAIL

normal for BSNL.

Quote:

Authentication Method: Select CHAP

Select Auto

gthegde@gmail.com · 05-27-09, 10:48 PM

Thanks for trying to help me.

It seems it has different Software and Firmware versions than yours.

But still I tried as you suggested. But ADSL link is still down. There is no problem with the connection because I am used UltraStarcom Router before.

Please see the version information as well as my router settings.

essbebe · 05-28-09, 12:20 AM

Please follow this web site settings
as shown in screen shots.
enter your Id without @ bsnl.in

Select 0_35 link in WAN page and click EDIT

Please don't worry about firmware software versions modem model etc
1.For ALWAYS ON" PPP/PPPoE mode.
http://mydataone.net/router/utstar300r2unew.html

2. For dialer mode " bridged " wanminiport.

The little I know about Dataone Broadband Services offered by BSNL

If still problem :
Post data:

Start RUN type cmd type ipconfig /all

feedback.

gthegde@gmail.com · 05-28-09, 12:52 AM

Dear essbebe,

Thanx for that detailed support.

I have problem with Beetel 220 BX modem , not with Ultrastarcom modem.

In Beetel modem ADSL link is always down, but my BSNL connection is fine with other router.

Please see the attachment for my WAN setting and DSL status .

Thank you.

essbebe · 05-28-09, 07:09 AM

in this page

What happens when you click the EDIT button ?

for VPI/VCI 0/35.
Any new page opens ?

Para two :
Post your Beetel 220Bx Device status.

05-28-09, 07:25 AM

There might be many reasons for the ADSL Link to be down.
Please refer to his post: http://www.indiabroadband.net/bsnl-b...tml#post148009 (Unstable internet connection.)

essbebe · 05-28-09, 07:42 AM

@dhaneshv
From Post No 53.

Quote:

I have problem with Beetel 220 BX modem , not with Ultrastarcom modem.

In Beetel modem ADSL link is always down, but my BSNL connection is fine with other router.

Please wait for feedback
and continue to help him please.

gthegde@gmail.com · 05-28-09, 02:37 PM

Here I am providing my WAN setup details for the Beetel 220 BX modem. Please find the attachments.

Also I don't have any parallel phones, the same wiring is working fine with other modem (UTStarcom)

Thank you.

essbebe · 05-28-09, 05:24 PM

suggestion 1.
wan settings2 page.
Just try authentication AUTO , instead of CHAP.

Para two:
If still "NoGo"
type 192.168.1.1/main.html
Advanced settings menu should appear.
http://i23.tinypic.com/nlpdhs.jpg
Click WAN
proceed as usual.
after finishing
click LAN make entries.
then
Save REBOOT. wait for two minutes.

Feed back.

Para three:
presume on top left above menu showing AUTO is for Language selection
English or Chinese.

.

gthegde@gmail.com · 05-28-09, 05:45 PM

No changes in the result , the ADSL link is still off. There is no DSL or Link light in modem.

essbebe · 05-28-09, 05:55 PM

1.You should answer specifically, whether you tried
what is suggested .

2.Can easily suggest Firmware update, but trying to
confirm, whether it is needed.

3.Also if anything goes wrong you will have a
modem beyond repair.

4. what is the model /make of your Utstar modem ?

01-09-09, 05:40 PM	#41
anandsaju Junior Member Join Date: Jan 2009 Age: 37 Posts: 1 Rep Power: 0	Beetel Modem with Beetel Splitter not working for BSNL I have configured Airtel Beetel 220BX modem for BSNL and it is working fine. I followed the steps mentioned here. I am using the splitter provided by the BSNL. But when i change the splitter to Beetel(provided by airtel), there is no signal and the LED's are also not glowing. I have only set up the PPPoE connection. Did I miss anything or I need to change the splitter. Please help. Thanks, Anand

01-15-09, 11:57 PM	#44
manjupelle Junior Member Join Date: Dec 2008 Posts: 4 Rep Power: 0	Configuring Beetel 200BX for BSNL Hi all, I'm trying to configure ppoe for beetel modem but unable to complete getting error in Diagnostics: Test the connection to your DSL service provider: ------------------------------------------- Test ADSL Synchorization: PASS Test ATM OAM F5 segment ping: FAIL Test ATM OAM F5 end-to-end ping: FAIL ------------------------------------------- Test the connection to your Internet service provider: ------------------------------------------- Test PPP Server connection: FAIL Test authentication with ISP: PASS Test the assigned IP Address: FAIL Ping Default gateway: PASS Ping primary DNS: PASS ------------------------------------------- AND ALSO WHEN IN CHECK THE WAN CONNECTION UNDER DEVICE INFO IT SHOWS AS : -------------------------------------------------------------------------------------- 0/35-off -1 -UBR -BSNL -ppp_0_0_35_1 -ppoE -Enabled -Disabled -Enabled -Up -59.92.134.117(Disconnect) ------------------------------------------------------------------------------------- i have also done the same setting as mentioned : ------------------------------------------------------- 1. First login to your Router using default username and password 2. Click on WAN on the left side menu 3. You'll have options to add or remove configurations. 4. Please select and remove the bridge config as BSNL does not support Bridge. 5. Please click edit on the existing PPPoE Airtel Configuration 6. Set the VPI=0 and VCI=35 (for Airtel it would be 1,32) and click next 7. Select PPP over Ethernet (PPPoE) and encapsulation type: LLC/Snap Bridging and click next 8. Enter the following details: PPP Username: Your bsnl username (no need to add dataone.in) PPP Password: Your bsnl password PPPoE Service Name: DataOne Authentication Method: Select CHAP Click Next 9. Check the Enable IGMP Multicast Option Check Enable WAN Service Option Enter the Service Name as BSNL 10. Click Next and Save. You should also save and reboot your modem. And Lo... you can now browse through BSNL broadband!! ------------------------------------------------------- Waiting for reply......

01-16-09, 06:37 PM	#47
essbebe Platinum Member Join Date: Aug 2007 Location: Chennai Posts: 4,246 Rep Power: 12	Bharat Sanchar Nigam Ltd. SELECT ACCORDING TO YOUR USAGE/budget/time that can be spent on Internet/special interest movies/music/ chat/ etc. If you need unlimited UL750 plan at 256Kbps Home Flexi 350 Home UL 750 Home UL 750 Plus For faster speed Home 500 series speed upto 2 Mbps Home 125 Home 250 Home 500 Home 1000. etc Last edited by essbebe; 01-16-09 at 07:16 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
BSNL Broadband- Excess Billing & Deficient Service	India Broadband	BSNL broadband	33	11-21-09 11:50 PM
Making the BSNL DataOne Wireless home network guide	Admin	BSNL broadband	203	11-20-09 10:00 PM
Dataone rocks, BSNL Sucks!	India Broadband	BSNL broadband	2	10-29-08 02:06 AM
BSNL Dataone Review By Nishant	India Broadband	BSNL broadband	4	12-23-07 02:27 AM
BSNL has tied up with HCL Infosystems Ltd. to launch the BSNL HCL PC for DataOne broa	Admin	BSNL broadband	0	04-03-06 04:26 AM

India Broadband Forum

Configuring Beetel 220BX with BSNL dataone

Configuring Beetel 220BX with BSNL dataone

Similar Threads

01-16-09, 04:51 PM	#46
yogesh gauria Junior Member Join Date: Jan 2009 Age: 35 Posts: 1 Rep Power: 0	Hello I am willing to go for BSNL internet services is it ok. And what is the cost.

01-16-09, 08:49 PM	#48
superprash2003 Platinum Member Join Date: Feb 2008 Posts: 2,692 Rep Power: 5	@yogesh if you really want to know how good BSNL is .. its best to ask people around you who use it .. As in some areas they have really bad server and customer support .. whereas in other areas , its really good!!

05-28-09, 12:20 AM	#52
essbebe Platinum Member Join Date: Aug 2007 Location: Chennai Posts: 4,246 Rep Power: 12	Please follow this web site settings as shown in screen shots. enter your Id without @ bsnl.in Select 0_35 link in WAN page and click EDIT Please don't worry about firmware software versions modem model etc 1.For ALWAYS ON" PPP/PPPoE mode. http://mydataone.net/router/utstar300r2unew.html 2. For dialer mode " bridged " wanminiport. The little I know about Dataone Broadband Services offered by BSNL If still problem : Post data: Start RUN type cmd type ipconfig /all feedback.

05-28-09, 07:25 AM	#55
The One Guest Posts: n/a	There might be many reasons for the ADSL Link to be down. Please refer to his post: http://www.indiabroadband.net/bsnl-b...tml#post148009 (Unstable internet connection.)

05-28-09, 05:45 PM	#59
gthegde@gmail.com Junior Member Join Date: Mar 2009 Posts: 16 Rep Power: 1	No changes in the result , the ADSL link is still off. There is no DSL or Link light in modem.

05-28-09, 05:55 PM	#60
essbebe Platinum Member Join Date: Aug 2007 Location: Chennai Posts: 4,246 Rep Power: 12	1.You should answer specifically, whether you tried what is suggested . 2.Can easily suggest Firmware update, but trying to confirm, whether it is needed. 3.Also if anything goes wrong you will have a modem beyond repair. 4. what is the model /make of your Utstar modem ?