Thread: Configuring Beetel 220BX with BSNL dataone

Hello,

I tried configuring my Beetel 220BX modem for BSNL broadband internet connection. I first entered the IP Adress, subnet mask, Primary/secondary DNS server details during TCP / IP configuration. After that, for configuring my modem, I opened the browser and logged on to hhtp://192.168.1.1. A window (DSL Router) popped up asking for username and password, for which I entered admin and admin respectively. But it is not accepting this username / password combination. Could anyone please help me in solving this problem,

Thanks and best regards,
Guru.

1.
Option 1
For Beetel series modems routers
UserID admin
Password : password
( default )

2.

Option 2 :
Start RUN type cmd Ok
Type ipconfig /all
The default gateway is Modem's.

3.
Option 3
select Obtain IP address automatically
Apply Save.
Recheck Modem gateway.

4.
Option 4:
Reset modem with power on for 20 to 30 seconds.
Factory defaults will be admin and password.

5.Option 5:Access Control -- Passwords

Access to your DSL router is controlled through three user accounts: admin, support, and user.

The user name "admin" has unrestricted access to change and view configuration of your DSL Router.

The user name "support" is used to allow an ISP technician to access your DSL Router for maintenance and to run diagnostics.

The user name "user" can access the DSL Router, view configuration settings and statistics, as well as, update the router's software.

Usually for all above UserID's
default password is : password.




Feedback.

Hi Essbebe,
Thanks a lot for your suggestions and all your previous postings on configuring the Beetel modem for BSNL internet. Now, I am able to browse the net.
But now, I am facing another problem. I am actually having trouble in accessing many websites like microsoft.com, symantec.com, mcafee.com, etc. I get the error message - "DNS error - cannot find server". Can you please give me your inputs on this,

Thanks a lot,
Guru.

START run type cmd OK
New window
type ipconfig /all
Copy/paste data here.

In modem check the page having MTU window change it to 1492
see in WAN page in which you enter USERID and password.

or download tcp/ip optimizer from speedguide.net.
Follow instructions.

Hi Essbebe,

I have attached the output of ipconfig /all command (as a bmp attachment).
I tried your other suggestions. The MTU as per the current setting is 1492.
I still am not able to access some web-sites due to the DNS Error. Your help is very much appreciated,

Thanks,
Guru

Sorry. Can see BMP attachement only after 9PM ! ( free NU
Any way DID I suggest
opendns 208.67.220.220 and
208.67.222.222
@meetdilip will post the screenshot !!!!

@meetdilip
Thanks for posting the annexure.
I have to search my folders .

@pavguru
Also in modem Advanced Options DNS
uncheck Obtain dns automatically, and
enter opendns shown above.
Save Reboot. Wait for 2 minutes.

Originally Posted by essbebe

@meetdilip
Thanks for posting the annexure.
I have to search my folders .

No problem. Always welcome.

I am trying to use beetel 110BX1 modem with BSNL broad band for Desktop

I tried all the steps mensioned in the thread, but the link LED not blinking and i and getting 404 error.
I tried to ping 192.168.1.1 and the result is
Result:PING :Transmit failed ,error code 65

My diagnostic page looks:

TEST the connecton of yor local network
--------------------------------------
Test your ENET(1-3) connection : FAIL
Test your ENET4 connection : PASS


Test the connection of your DSL Service
--------------------------------------
Test ADSL synchronisation :FAIL
Test ATM OAM F5 segment ping : Disabled
Test ATM OAM F5 End to end ping : Disabled

Test the connection of your internet service provider
----------------------------------------------------
Test PPP server connectionisabled
Test authentication with ISLisabled
Test the assigned IP addressisabled
Ping default gatewayisabled
Ping primary domain name serverisabled

Originally Posted by ssncek

I am trying to use beetel 110BX1 modem with BSNL broad band for Desktop

Check the settings as per this web site ( with screen shots )
similar modem with same menu pages.
1.For "Always On" PPPoE connection ( UserId PW entered in wan page )
The little I know about Dataone Broadband Services offered by BSNL
2.for using a dialer window ( enter ID PW externally to modem )
The little I know about Dataone Broadband Services offered by BSNL

VPI/VCI for BSNL 0 and 35
DNS if not automatic enter
208.67.220.220 and
208.67.222.222
SAVE REBOOT wait for 2 minutes.

Feedback.

MASTER REFERENCE :
for about 20 similar modem/router/WIFI
( My post : cannot edit )

http://www.indiabroadband.net/bsnl-b...reference.html (UTSTAR WA3002-G4 quick reference)

I had tried it but still my link LED not blinking. I will post my snapshots soon.
I guess the whole problem is because link LED not blinking. Am i right?
Now i have a question:
1. Is the setting of the modem's WAN setting mandatory to get the link LED blink?

In your computer
Start RUN type cmd
OK
New window opens
type ipconfig /all
Copy /Paste the data here ( NO edit )
==============================
2.

Installation Process of Beetel 220BX Combo modem.
Modem settings for NIC/LAN card:
Default Ip address 192.168.1.1
Subnet Mask 255.255.255.0
IP address 192.168.1.x ( x= 2 to 50 (say))
DNS server
use open DNS 208.67.220.220 208.67.222.222

Log in the router page in IE:
Select WAN
1.In WAN set up choose all the WAN interfaces by checking on remove and then click on remove.
2.Click on ADD Change the VPI to 0 and VCI to 35
(* most important setting ) then click on next
3. Select PPP over Ethernet PPPoE
4. Select llc/snap-bridging click NEXT
5. In PPP username and password
( *without @ bsnl.in)
6. Enter PPPoE service as BSNL
7. Use Autnentication mode as AUTO
8. Leave other two boxes unchecked. click NEXT
9. Click NEXT again
10 Clickon SAVE on the NEXT screen
11. Clickon SAve Reboot and WAIT for approx 5 mnts.
12. Configuration is successful Happy surfing

===========================
3. Worst case scenerio:
Reset the modem to factory settings.
Try to connect in "Dialer" mode.

First i would like to thank essbebe.....
i tried most of essbebe suggestions and others thru which i could resolve the issue.
i had multiple problems in configuring my BEETEL 110BX1 adsl2 modem [which i got from AIRTEL] for BSNL broad band .

Issue:After configuring my modem for BSNL [VCI/VPI 0/35 ,TR-069 clientisable ,ACCESS CONTROL :select all] , i couldn't get the LINK LED blink.and so couldn't connect to internet.

This is what i have done to resolve the issue:
1.Ping 192.168.1.1
Got ping failed .error 65.
Removed ZONE ALARM firewall
Ping 192.168.1.1 was successful
2.LINK LED doesn't blink
Tried to connect my modem on my friends machine [with his credentials]who has BSNL connection.
LINK LED was blinking
Called BSNL once again to confirm my broadband was provided fully.
After little talk they admitted that connection was not fully provided to me and assured to correct it after a day.
Next day i could get LINK LED link.
Wait .. this is not the end
3.I got 404 error when browsing.
changed the network connection to get "obtain ip addrs and DNS server automatically"
Now i could browse at 2MBPS [actually 1.4MBPS ]
4.THE END

I tried lot of different solutions for my DNA-A211-I router/modem
none worked
my PC laptop specs are
_________________________
PC
dual booting
LINUX UBUNTU
& XP prof. SP2
core2duo
2gb ram
ip 192.168.1.4
gateway 192.168.1.1
=================
Laptop
core2duo
1gb ram
ip 192.168.1.3
gateway 192.168.1.1
=================
now i want to connect to LAN and internet from both computers simultaneously even if it's only LAN or internet it's OK
================================================== ==
my ipconfig /all


C:\Documents and Settings\A>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : A
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : Yes
DNS Suffix Search List. . . . . . : 64.105.172.26
67.100.88.27

Ethernet adapter VMware Network Adapter VMnet8:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet8
Physical Address. . . . . . . . . : 00-50-56-C0-00-08
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.145.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
IP Address. . . . . . . . . . . . : fe80::250:56ff:fec0:8%4
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 127.0.0.1
fec0:0:0:ffff::1%3
fec0:0:0:ffff::2%3
fec0:0:0:ffff::3%3

Ethernet adapter VMware Network Adapter VMnet1:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet1
Physical Address. . . . . . . . . : 00-50-56-C0-00-01
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.74.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
IP Address. . . . . . . . . . . . : fe80::250:56ff:fec0:1%5
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 127.0.0.1
fec0:0:0:ffff::1%2
fec0:0:0:ffff::2%2
fec0:0:0:ffff::3%2

Ethernet adapter Local Area Connection 2:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Eth
Physical Address. . . . . . . . . : 00-1F-D0-FD-4C-32
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.1.4
Subnet Mask . . . . . . . . . . . : 255.255.255.0
IP Address. . . . . . . . . . . . : fe80::21f:d0ff:fefd:4c32%6
Default Gateway . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 127.0.0.1
192.168.1.1
fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1

PPP adapter Dataone:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface
Physical Address. . . . . . . . . : 00-53-45-00-00-00
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 117.204.167.63
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . : 117.204.167.63
DNS Servers . . . . . . . . . . . : 208.67.220.220
208.67.222.222
NetBIOS over Tcpip. . . . . . . . : Disabled

Tunnel adapter Teredo Tunneling Pseudo-Interface:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-FA-72-8A-33-58-C0
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : fe80::ffff:ffff:fffd%7
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Disabled

Tunnel adapter 6to4 Tunneling Pseudo-Interface:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : 6to4 Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 75-CC-A7-3F
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 2002:75cc:a73f::75cc:a73f
Default Gateway . . . . . . . . . : 2002:c058:6301::c058:6301
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Disabled

Tunnel adapter Automatic Tunneling Pseudo-Interface:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Automatic Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 75-CC-A7-3F
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : fe80::5efe:117.204.167.63%2
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Disabled

Tunnel adapter Automatic Tunneling Pseudo-Interface:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Automatic Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : C0-A8-91-01
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : fe80::5efe:192.168.145.1%2
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%3
fec0:0:0:ffff::2%3
fec0:0:0:ffff::3%3
NetBIOS over Tcpip. . . . . . . . : Disabled

Tunnel adapter Automatic Tunneling Pseudo-Interface:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Automatic Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : C0-A8-4A-01
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : fe80::5efe:192.168.74.1%2
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%2
fec0:0:0:ffff::2%2
fec0:0:0:ffff::3%2
NetBIOS over Tcpip. . . . . . . . : Disabled

Tunnel adapter Automatic Tunneling Pseudo-Interface:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Automatic Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : C0-A8-01-04
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : fe80::5efe:192.168.1.4%2
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Disabled
================================================== ==========

------------
help!

1.Reset the modem.
2.
see Post No.
http://www.indiabroadband.net/bsnl-b...tml#post259293 (Configuring Beetel 220BX with BSNL dataone)
MODEM:
Disable assingn dns automatically and enter this values
Use dns 208.67.220.220 and 8.8.8.8
Enbale DHCP and give range 192.168.1.2 to 192.168.1.4.
Apply Save . wait for two minutes.
3.
In computer:
Network settings:
disable IPV6
select tcp/ip
properties.
Obtain Ip address automatically
dns as above.
ApplY save.
4. If dialer mode does not work
try " Always On ' connection
5. feedback:
post data again. ipconfig /all

How to enable DHCP
i don't know much

http://img396.imageshack.us/img396/8247/picture1ld1.png
Save Reboot wait for 2 minutes.

Originally Posted by bbkumar View Post
I have a step to step method as of how you can configure your Beetel 220BX modem for BSNL Broadband....


1. First login to your Router using default username and password

2. Click on WAN on the left side menu

3. You'll have options to add or remove configurations.

4. Please select and remove the bridge config as BSNL does not support Bridge.

5. Please click edit on the existing PPPoE Airtel Configuration

6. Set the VPI=0 and VCI=35 (for Airtel it would be 1,32) and click next

7. Select PPP over Ethernet (PPPoE) and encapsulation type: LLC/Snap Bridging and click next

8. Enter the following details:

PPP Username: Your bsnl username (no need to add dataone.in)

PPP Password: Your bsnl password

PPPoE Service Name: DataOne

Authentication Method: Select CHAP

Enable Fullcone NAT : Enable

MTU [1000-2000]: 1452


Click Next

9. Check the Enable IGMP Multicast Option

Check Enable NAT

Check Enable WAN Service Option

Enter the Service Name as BSNL

10. Click Next and Save. You should also save and reboot your modem.


And Lo... you can now browse through BSNL broadband!!

Hi ,
want to configure beetel 220x with BSNL broadband.
i did the configuration as mentioned in this thread and it is able to connect but not able to browse.
images of configuration page are being linked.
plz help me out.

Edit: Images are uploaded. Please check

Thanks,
Selvi

Check Post No 86 here.
or this link
Menu pages are same . Ignore wifi settings.
http://www.indiabroadband.net/bsnl-b...reference.html (UTSTAR WA3002-G4 quick reference)

Para two :
You have to upload the jpg here or at tinypic.com
Procedure :
When posting here
Select "Go Advanced"
Scroll down the page

Select Manage Attachments
Upload from your hard disk
or
Upload at tinypic.com
Give link here omitting http:// ( no space and dots )

Sorry for the repost.
I have uploaded the images.
Please check post# 95.

MTU [1000-2000]: 1452

1.
Change to 1492
Save and Reboot.
2.

DNS entries in modem
change to 8.8.8.8 and 208.67.220.220
3.
feedback if needed:
Modem Statistics menu adsl data. and Device Info
Post screen shots.

Hi,
Thanks for ur suggesstion. I will do as u said.

from bsnl i was given dns entry as : 192.168.1.1

if i give some other entry or select "obtain dns automatically"

ping status in diagnostics page goes FAIL.

anyways i will try what u have given.

Sorry , images were not shown clearly in the previous message.

images in tinypic :
i56.tinypic.com/2u76p86.jpg

i52.tinypic.com/6i4opj.jpg

i53.tinypic.com/2lid6ap.jpg

i51.tinypic.com/21108x2.jpg

i54.tinypic.com/vfie0x.jpg

i56.tinypic.com/2zxqzgi.jpg

i54.tinypic.com/ibho37.jpg

i56.tinypic.com/200b6vr.jpg

i53.tinypic.com/mwzajc.jpg

Thanks
Selvi

Hi ,
Thanks for ur reply.
what is Modem Statistics menu ? and adsl data

Thanks,
Selvi

i56.tinypic.com/2u76p86.jpg wan info OK.

i52.tinypic.com/6i4opj.jpg Device Info routing
appears you are on "DIALER" mode. Change to PPP/PPPoE
mode in WAN page. ( uncheck "bridged" and select PPP/PPPoE etc.

i53.tinypic.com/2lid6ap.jpg wan nat settings.ChANGE mtu to 1492. Uncheck box IGMP broadcast.

i51.tinypic.com/21108x2.jpg lan SETTINGS OK.

i54.tinypic.com/vfie0x.jpg default Gateway . Enable auto mode.

i56.tinypic.com/2zxqzgi.jpg dns enter 8.8.8.8 and 208.67.220.220

i54.tinypic.com/ibho37.jpg DSL settings NO changes now.
i56.tinypic.com/200b6vr.jpg DIAGNOSTICS result OK.

i53.tinypic.com/mwzajc.jpg TCP/IP properties page.
Select assing Ip address automatically.
enter dns 8.8.8.8 and 208.67.220.220
Apply Save.

what is Modem Statistics menu ? and adsl data

open 192.168.1.1/main.html
left side menu page Click SUMMARY
under this select Statistics ADSL page.
Shows whether your modem is synchronised to BB connection.
Line conditions such as snr attenuation etc.