Thread: How can I configure Beetel 450 TC1 (ADSL2+router2) for BSNL internet connection?

ajayjosh I sent you a another mail cheak it

Hi

Thanks for the the reply

I will try after going home....

Hi
I tried to create one and give name as dataone.
But when i doulbe click it...nothig is happening

@ajayjosh
If you are useing Windows XP then go to control panal
The view is apper in category. You can see Pick a categary and if you not see this then switch to categary view.
In control Panal click Network and Internet Connections then click Setup or change your Internet connection
It will open up Internet Properties windo. Then click Setup button
Select Connect to the intenet - Setup my Connection Manually - Connect Using a Broadband connection that requir username and password.
Type your ISP name then click next. In this windo type your user ID and password. Click next. Tick on the Box saying add a shortcut to this connection to my desktop.

If you are in Classic View then open the Internet Option in contron panal and then click the connections tab and then Setup tab. Then follow the step above.

i did everything as said but the password given by the BSNL was wrong...

the guy from bsnl know which are 2 defualt password they use and tried the not given to me and within a minute...my bb was flashing and on.........

this is just to earn 250/-


Thanks for the help..

now please guide me how to change the password

dude i m also having the same problem as till now i m was unables to configure my 450tc1 on bsnl line

if u u got any solution please tell me also 9971658563

Save present settings of the modem/router to say
C:/My Documents/ BSNL settings not working
2.
With power on RESET the modem to Factory
Defaults.
3/.
Use "Dialer" and enter BSNL USERID and PW

4.Error message ? connected ?

5. Copy/Paste data ( NO EDIT)
In Computer
Start RUn type cmd OK
New window
Type ipconfig /all

VPI/VCI for BSNL 0 and 35.
DNS Use 208.67.220.220 and 8.8.8.8

REFERENCE:
See similar model for settings. confirm.

Sample page :wa3002-g1
http://img200.imageshack.us/img200/8...ninterface.jpg
http://www.calcutta.bsnl.co.in/dataoneinstall/mu08.html

even i have tried everything essbebe but the wireless is just not getting connected to internet..please advise..

1.
Check WIFI channel selected is 6 or 11.

Copy/Paste following data for WLAN only>
Start/RUN/type cmd Ok
New window
type ipconfig /all

2
.Check settings here :
http://www.maharashtra.bsnl.co.in/ssa/nashik/wa3002.htm
http://mtnlmumbai.in/triband/htm/utstar_wireless_II.pdf

3.
Click the wireless Network Icon in taskbar.
Select Status Repair. What error message you get ?

@gagankeshav
1.
Mention your modem/router model/make/number
If 450TCI
http://www.maharashtra.bsnl.co.in/ssa/nashik/wa3002.htm
2.
Copy/paste this data here.

in computer
Start RUN type cmd
Ok
New window
type ipconfig /all

@modem.yadav

want any help for broadband support?

You can give your suggestion/s here in this forum ,or PM to user.

Thank You Friends for your great help.

Dear Friends,


Kindly Help me. I have a 450TC1 ADSL2+ Router from Beetel. My service provider is BSNL in Hyderabad. The technician is Inefficient in configuring this modem.

So I followed all the previous steps and trying very hard to configure it.

But after saving PVC2 for Virtual Circuit in Interface Setup and restarting the Modem mentioning clearly to use current settings the modem goes back to PVC0. I've been trying since a month and paying free Internet bill without using the internet. Kindly HELP

Regards and Diwali Wishes
ARES

WAS the modem used earlier in AIRTEL Broadband?
In PVC0 select "deactivate" SAVE



In access control deactivate ACL SAVE
and cwmp deactivate SAVE
Reboot from current settings.

When you select STATUS device info will default to PVC0
snr/attn data will be shown.
Select PVC2 and check Bsnl is connected.
Mention FW shown on top.


Do you need wifi settings ?
Try default MNGMT or Airtel or ssid 2 with wep code 0987654321.
See link 450TCI for screen shots etc.

Select Internet settings PVC2 or any and click for this PVC summary.

Report error message at end of page
if ADSl connected not seen.