Thread: Configuring UT300R2U modem with Netgear WGR614 v6 router

Guyz,
Does anybody have experience configuring UT300R2U modem with Netgear WGR614 v6 router? I think I am going wrong somewhere when configuring the bridge.
There are few posts on the forum however they do not match to exact versions of above devices. And latest version of UT300R2U firmware seem to have upgraded.
If anyone has step-by-step guide (will be addressed as God henceforth) would be of immense help.
dan-J

Did you see the Broadband How to ...." forum ?
See the first sticky post and select correct guide by
@just4kix.
IN UT300R2U
Change to "AlwaysON"
Enable DHCP.
Confirm
1.Internet connection OK with ADSL modem
2. you can use Netgear WGR614 V6 in LAN mode.
3. Now wifi mode for laptop. Problem if any.
4. Copypaste ,POst these data ( No edit )
Procedure
Start RUN type cmd OK.
New window type ipconfig /all
for both LAN and Wireless network.

Para two:
I am a learner here, and by just answering
queries by members my understanding of
modems etc has improved.

Even GOD has to get the answers in forums
because thousands of modems/routers/wifi etc
are in use.!!!!!!!

There are few posts on the forum...........

a very general statement. give the thread links you
accessed after searching in this forum.

Appreciate your help... please see the information below

1.Internet connection OK with ADSL modem [YES]
2. you can use Netgear WGR614 V6 in LAN mode. [YES]
3. Now wifi mode for laptop. Problem if any. [NO]
4. Copypaste ,POst these data ( No edit )

C:\>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : comp1
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom 440x 10/100 Integrated Cont
roller
Physical Address. . . . . . . . . : 00-12-3F-EA-B5-E3
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 101.70.112.100
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 101.70.112.13
DHCP Server . . . . . . . . . . . : 101.70.112.13
DNS Servers . . . . . . . . . . . : 101.70.112.13
Lease Obtained. . . . . . . . . . : Tuesday, November 17, 2009 10:27:05
PM
Lease Expires . . . . . . . . . . : Wednesday, November 18, 2009 10:27:0
5 PM

Ethernet adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : Intel(R) PRO/Wireless 2200BG Network
Connection
Physical Address. . . . . . . . . : 00-13-CE-44-F2-DF

You are right there are just too many modems and routers. I found "Setup of UT-300R2 with Netgear WGR614v7" post by just4kix as closest match for what I was looking for. But my modem firmaware appears to be different. It does not provide the wizard to configure. And the router I have is v6 whereas what just4kix has posted is v7.

Did you create a wLAN?
Start /All Programs/ Accessories
Communications
Wireless network Wizard.
Follow instructions

2. Start Network/ Show all connections
select WLAN
post ipconfig /all
Feedback.

V6 v7 makes no difference
Cannot make guides for all combinations.
I have/am using Netgear wgr614V6TDC

Ensure tcp/ip select Obtain ip address automatically
feedback.