Thread: BSNL Yellow light Keeps restarting and dont get connected again untill 10 mins.

Hello Friends,
Since 7 days i have been experiencing this problem.
Sometimes the internet keeps getting disconnected or restarts every 10 mins.... This usually happens during night.

I have been facing a bad experience with BSNL guys , would be appreiciated if anyone of you could help me solve this problem FOREVER.

I included the image here, let me know if you want anything more to be attached.
Problem :

Yellow Light keeps glowing but do connect.
I usually have to keep the modem closed for 30 mins and it comes again.

Image is h**p://i46.tinypic.com/215r4l.png
Please replace ** with tt ( http )


Device Info

BoardID: 96338W
Software Version: 1132_061507-3.08L.BSNL_02.
Bootloader (CFE) Version: 1.0.37-8.7
Firmware Version: WA3002G4-0021.01
Hardware Version: WA3002G4 1.0
Model Name: WA3002G4
Wireless Driver Version: 3.131.35.6.cpe2.0a.s

This information reflects the current status of your DSL connection.


Line Rate - Upstream (Kbps): 509
Line Rate - Downstream (Kbps): 2046
LAN IP Address: 192.168.1.1
MAC Address: 00-1b-da-29-1e-34
Default Gateway: 117.195.224.1
Primary DNS Server: 208.67.222.222
Secondary DNS Server: 208.67.220.220

I checked the DSL setttings here.
Uploading it to Tinypic,

Please check if there is anything i have to edit.

h**p://i47.tinypic.com/2094tol.png

( replace ** with tt ( http )

1.
http://i47.tinypic.com/2094tol.png
Uncheck box adsl2 +
2. In Management
tr_069 client unchec box if enabled.
Save reboot. Wait for 2 minutes.
3. repost snr attn line rate after above tweaks.

REF:
http://www.indiabroadband.net/bsnl-b...reference.html (UTSTAR WA3002-G4 quick reference)

Hi,
Thanks for the help.
I have done as told and here are the details again. Not sure if it fixed or not since i have just configured it.

If the problem repeats again , i will update the thread. Its daytime now and this usually happens during night ( sometimes during the day tooo )

Device Info

BoardID: 96338W
Software Version: 1132_061507-3.08L.BSNL_02.
Bootloader (CFE) Version: 1.0.37-8.7
Firmware Version: WA3002G4-0021.01
Hardware Version: WA3002G4 1.0
Model Name: WA3002G4
Wireless Driver Version: 3.131.35.6.cpe2.0a.s

This information reflects the current status of your DSL connection.


Line Rate - Upstream (Kbps): 509
Line Rate - Downstream (Kbps): 2046
LAN IP Address: 192.168.1.1
MAC Address: 00-1b-da-29-1e-34
Default Gateway: 117.195.224.1
Primary DNS Server: 218.248.255.147
Secondary DNS Server: 218.248.255.146

Post following details.... you can find the same at

Device Info > Statistics -- ADSL

SNR Margin (dB): ??
Attenuation (dB): ??

Hi deepmohan ,i appreciated your interest towards helping a noob like me...

Here is what you requested:

Statistics -- ADSL

Mode: ADSL2
Line Coding: Trellis On
Status: No Defect
Link Power State: L0

Downstream Upstream
SNR Margin (dB): 26.2 20.8
Attenuation (dB): 22.5 12.0



Output Power (dBm): 12.4 8.2
Attainable Rate (Kbps): 8748 1017
Rate (Kbps): 2046 509
MSGc (number of bytes in overhead channel message): 61 13
B (number of bytes in Mux Data Frame): 62 7
M (number of Mux Data Frames in FEC Data Frame): 1 16
T (Mux Data Frames over sync bytes): 1 7
R (number of check bytes in FEC Data Frame): 16 16
S (ratio of FEC over PMD Data Frame length): 0.9693 7.8904
L (number of bits in PMD Data Frame): 652 146
D (interleaver depth): 64 8
Delay (msec): 15 15

Super Frames: 20014 20314
Super Frame Errors: 0 161484
RS Words: 1340954 164467
RS Correctable Errors: 22 42400685
RS Uncorrectable Errors: 0 N/A

HEC Errors: 0 1587890
OCD Errors: 0 0
LCD Errors: 0 0
Total Cells: 1569658 649892777
Data Cells: 17238 106531989
Bit Errors: 0 111058343

Total ES: 0 1676301
Total SES: 0 1613440
Total UAS: 79 1601251

I have done all that you asked me to do....

Now i noticed same problem , no change... Is it something big or minor , anything like that..? Because whenever BSNL guys comes , it works and they have no clue of what i am telling them...

I would be really thankfull if anybody could help in this regards,

Thanks a lot.

@hyderabad

Your SNR Margin & Attenuation are excellent seems there is no problem with your line.

Yellow Light keeps glowing but do connect.
I usually have to keep the modem closed for 30 mins and it comes again.

This is form your first post can you please elaborate the problem faced by you.

My preliminary conclusion is that there might be some issues with your PORT in Exchange, if your modem is not faulty.