Thread: Pl help need some info badly regarding bridge and pppoe

Hi

i'm a broadband 500 combo user and was using ma modem in PPPOE mode all this while. i could connect ma 5800 through wifi and ma pc through the wire .
now i have shifted to the bridge set up and use the dialer to connect to the net through ma pc using the wire.

could u pl tell me if i can connect ma 5800 through wifi while the modem is in bridge mode.

modem model wa3002g4

could u pl be telling if i could configure the modem in bridge mode while the router in pppoe mode . i have a modem come router model no wa30002g4

WA3002G4 is a modem and router. Either you will have to use PPPoE or Bridge both cant be used.

In bridge mode you can connect your mobile to your wifi network form your router but only after you dial a connection from your PC.

Better switch back to PPPoE mode.

WA3002-G4 is Adsl modem+router 4 lan + wifi
How you connect to Internet in Dialer mode or PPPoE
does not make any difference.
Better , as suggested above ,to be in "AlwayOn" PPPoE Mode.

Then you can switch off computer Desktop ,
If you don't need . WIFI will be available.

For Instance for my Vonage VOIP
only Adsl modem+Vonage unit is Always on"PPPoE.
My laptop on Wifi mode with a wifi router
is used as and when when required.


REF:
http://www.indiabroadband.net/bsnl-b...reference.html (UTSTAR WA3002-G4 quick reference)

Originally Posted by deepmohan

WA3002G4 is a modem and router. Either you will have to use PPPoE or Bridge both cant be used.

In bridge mode you can connect your mobile to your wifi network form your router but only after you dial a connection from your PC.

thanks for the reply . could u pl help me as in how to connect ma 5800 to the wifi while the modem is in bridge mode . tat is after i dial the connection.

Originally Posted by deepmohan

WA3002G4 is a modem and router. Either you will have to use PPPoE or Bridge both cant be used.

In bridge mode you can connect your mobile to your wifi network form your router but only after you dial a connection from your PC.

Originally Posted by essbebe

WA3002-G4 is Adsl modem+router 4 lan + wifi
How you connect to Internet in Dialer mode or PPPoE
does not make any difference.
Better , as suggested above ,to be in "AlwayOn" PPPoE Mode.

Then you can switch off computer Desktop ,
If you don't need . WIFI will be available.

For Instance for my Vonage VOIP
only Adsl modem+Vonage unit is Always on"PPPoE.
My laptop on Wifi mode with a wifi router
is used as and when when required.

i get it but i have switched to bridge mode since if i dont switch of ma modem before 8 in the moring i get some usage in ma bill . wid bridge mode if i switch off ma sytem before 8 the net gets disconnected and registers a session before 8 and here by i can switch of ma modem at after 8 too.

i could not get the scripts to automatically reboot ma modem working for pppoe mode tat easily . if u could help me wid the script or any other easy process for modem restart in pppoe mode it would be really helpfull.

I saw few threads about changing connection from PPPoE TO BRIDGE in the DSL router .Performed their procedure accordingly internet connection disconnected.again i had to GO back to PPPoE.

AND
How to re-config the modem to run in PPPOE using "dialer" to connect.

modem model wa3002g4

AND
How to re-config the modem to run in PPPOE using

"dialer" to connect.

In the wan page of the modem/router you see
(a)"BRIDGED"
If selected , SAVE Reboot. wait for 2 minutes.
To connect Use Dialer
and enter your userId and PW in computer window.
(b)
and "PPPoE" : If selected you are directed to another page.
here you enter UserId and PW etc .
Presume now your modem connects automatically.

2.You have to create a dialer in computer.

http://www.calcutta.bsnl.co.in/datao...l/pppoe10.html

http://www.calcutta.bsnl.co.in/datao.../pppoe10a.html


For future reference : ( add to bookmarks , if found useful)
http://www.indiabroadband.net/bsnl-b...tml#post208783 (UTSTAR WA3002-G4 quick reference)

In dialer, apart from typing username and password, do i need to change any settings like filling IP address and DNS..
In router config page, are any other changes to be made apart from selecting bridging connection.

I am using USB modem connection.so,is it possible to portforward .

Image tutorial will be very helpful.

Originally Posted by girimotos

In dialer, apart from typing username and password, do i need to change any settings like filling IP address and DNS..
In router config page, are any other changes to be made apart from selecting bridging connection.

I am using USB modem connection.so,is it possible to portforward .

Image tutorial will be very helpful.

You should check the links given.
or follow the instructions
in network connection wizard.
Try and then ask questions.

see this also.
The little I know about Dataone Broadband Services offered by BSNL
h t t p://mydataone.net/dialer/wa3002g4.html

h t t p://mydataone.net/dialer/wa3002g4.html

see this for dialer mode.

Also check other links in same web site.