Thread: Wireless tab Missing in Nokia Simens SL2_141 Modem config page

Hi all,
I am having BSNL type 2 Nokia Simens Sl2_141 modem. The WLAN light doesn't blink in the modem and when I connect to http:/192.168.1.1 to configure the modem, the "wireless" tab is also missing there in the config page. So I cannot fix the wireless :-(

Please help.

Thanks in advance,
Koulin

Try hard reset of your modem and check again.

Look at the back of the modem and you will see a Reset hole. Get a ball-point pen and press the button in the hole while the modem is on. Continue to hold the button in until ALL of the lights on the modem start to flash simultaneously.

This will reset the modem back to factory defaults, and may recover your modem after you have made a mistake in changing some of the settings and don't know how to change them back.

In computer :
Start RUN type cmd Ok
new window
type ipconfig /all
copy/paste data here . (No edit )

The reset access point for the micro switch is at the bottom near right leg small round hole.
http://www.indiabroadband.net/attach...tswitchrt6.jpg
REF: similar modem/router menu pages.
http://www.indiabroadband.net/bsnl-b...reference.html (UTSTAR WA3002-G4 quick reference)

Thanks for the reply.. I did the hard reset but with no luck :-(

may be the process was not correct.. will try once again..

Originally Posted by koulin

I did the hard reset but with no luck :-( may be the process was not correct.. will try once again..

Switch on the modem let all the LEDs get stable then press and hold till all the LEDs go OFF.

I did the same and then when I tried to log back in to http:\\192.168.1.1 it's asking for the image file provided by the ISP. How can I get the same. Please help.


Thanks ...

confirm you get connected to Internet
( try dialer mode )
Or can access modem menu ( less wireless) as before.
Does you Device Info show like this ?
http://lh4.ggpht.com/_oExIqsF5ppM/Sj...tar%5B5%5D.jpg

Originally Posted by koulin

I did the same and then when I tried to log back in to http:\\192.168.1.1 it's asking for the image file provided by the ISP. How can I get the same.

Can you please elaborate what you are trying to say i am not able to understand, never herd of any such thing.?

when you type 192.168.1.1 it will ask for user name and password did you give the same, if given then whats the scenario.?

I can access and connect to modem minus wireless... It does show the device info...


when I had reset the modem it was asking for the image file when I connected with admin/admin... then when I switched off and restarted the modem I could connect internet without wireless..

Does the Device Info page show in Menu list on the left Wireless ?
How do you connect to Internet Now ?
Dialer mode or " Always On "

It does show the device info

Your replies are confusing (hazy) and not complete.
2. please copy/paste data of
ipconfig /all .

3. try 192.168.1.1/main.html
feedback.