Thread: Window 7

my network have many error like
619
718
815
615 (recently 615 running)
dsl is not blink and connection is cut, no data transfer.
so I disconnect connection and then connect, error 615 is face.
Then after i will run. I am install window 7
so this problem from pc or not?
please any solution post here

Please mention your modem - model and make

refer this link and set up a new dialer.
https://iihelp.iinet.net.au/Dialup_error_615
screen shots should help you.

Start RUN type cmd Ok
New window
type ipconfig /all
also details of modem make/model/number
as stated above.

Originally Posted by meetdilip

Please mention your modem - model and make

my modem is adsl 2+(BSNL Broadband) and ,Model is DNA-A211-1

Originally Posted by dhaval_power123

my modem is adsl 2+(BSNL Broadband) and ,Model is DNA-A211-1

check ur line for errors......
disconnection problems r faced mainly due to line errors....
call lineman.

Originally Posted by imrock

check ur line for errors......
disconnection problems r faced mainly due to line errors....
call lineman.

I checked but no change error 651 is still running every 10 min.

right now you are in bridge mode how does it work in PPPoE mode. inputs will be of help.

Can you post you SNR Margin and Attenuation (dB).



--------------------------
PS: Its a preliminary conclusion. Seems there is problem with your port at exchange and modem.
--------------------------

Error 651 in Windows 7 with PPPoE connections

--------------------------------------------------------------------------------

This problem is due to problem in windows 7 files mainly with PPPoE driver file raspppoe.sys you can find this file at c:windows > system32 > drivers folder the main problem is due to the root cause . but modifying that file you can solve your problem .To solve this problem simply renam the original raspppoe.sys file to something different else copying a working file from a Windows Vista system....................

Try "Always On" PPPoE mode.

Originally Posted by dhaval_power123

dsl is not blink and connection is cut, no data transfer. so I disconnect connection and then connect

what you meant by "connection is cut" is it for modem or PC?

You have not tried any way of the previous solutions/ or given feedback for data asked.
Post again the present problem :
==============================
(1)
In your computer:
Start RUn type cmd OK
New window
typeipconfig /all
COPY/PASTE the data here

(2)
Modem DNA A 211-I
(a) computer used in Lan mode (cable)_______
(b) computer used in or WIFI mode.___________
Operating System : Windows 7
(3)Internet connection ;
(a) Gets connected immediately__________
(b) NO. I use a dialer to connect ___________.
(4)
present problem ;
Error code/s if any _______________
Any other.__________________
(5)
feedback
Open 192.168.1.1 admin admin
Device Info
Statistics
ADSL
Upload page at tinypic.com and give link here

Or
Type data here
Mod mode selected
SNR U/L/ D/L
ATTN U/L D/L
line speed U/L D/L
Rate %2

It seems to be a same problem which i too faced when i had the ITI-DNA router.

Upgrade the Software of your router : Welcome to SEMINDIA, Semiconductors - Made in India

Check how it is working in PPPoE mode. REF PPPoE Setup: http://www.chennai.bsnl.co.in/BBS/WA...eless_security

Deepmohan thanks for replay
Can you fix this problem?
How to find out DNA-A211-I vertion?
I think update process erase all internal setting of mordem.
So what to do after update?

Originally Posted by dhaval_power123

How to find out DNA-A211-I vertion?

you can find the same as under Device Info, when you get into router setup page. http://192.168.1.1

I think update process erase all internal setting of mordem.
So what to do after update?

Yes it will erase all settings you will have to configure it again.

Just refer this link to configure in PPPoE Mode

@dhaval_power123
Warning
If you don't do Firmware upgrade properly,
You will have a router "DUD" "Unserviceable"
"out of order" etc.
If router on rent exchange it. If purchased outright, within a year BSNL may replace it.

Originally Posted by essbebe

Error 651 in Windows 7 with PPPoE connections

--------------------------------------------------------------------------------



Try "Always On" PPPoE mode.

I try this trick but not success please help anyother trick or if anyone who use window 7 without error, please attach his/her raspppoe.sys file

see @deepmohan's post at No. 13.
Modem/router menu/settings are same.

BHARAT SANCHAR NIGAM LIMITED

[QUOTE=essbebe;266651]see @deepmohan's post at No. 13.
Modem/router menu/settings are same.



but this link is not working
192.168.1.1

@dhaval_power
Current IP Check
type it in address bar of your browser.

REF
http://www.indiabroadband.net/tikona...-settings.html (Access 192.168.1.1 modem settings.)