Thread: How to configure ZTE ZXDSL 831AII Type I ADSL modem with my wifi router DLINK DL-524

I am currently using BSNL broadband on my laptop by connecting the ZTE ZXDSL 831AII Type I ADSL modem with a wire. Modem was bridge setting (means on laptop, I click on net link, and then enter my username, passoword on dialog).

Now I want to make this internet connection wireless. I have a Dlink wireless router DL-524.

What are configurations required on ZTE modem, Dlink router and on my laptop so that I can access wifi internet on my laptop.

Somebody said that I need to change to PPPoE mode.

Please someone provide all the details and settings.

(Laptop and Dlink router are in working condition. They have been tested on Airtel broadband).

@agrsaurabh123
ZTE ZXDSL 831AII Type I ADSL modem
someone provide all the details and settings.
(Laptop and Dlink DL524 router are in working condition. They have been tested on Airtel broadband).

Configuration - ZTE 831
Before going in for configuration or changing password Assign IP Address to the NIC

Step-1: Open the Internet Explorer, type 192.168.1.1 in the address bar and press Enter.

Step-2: Type user name as admin and password as admin and click on OK Button.

Step-3: On the left hand side, Click on the system.

Step-4: Click on reset and restart.

Step-5: On the right hand side, check reset to factory default setting button and click on restart. It will take 90 second.

Step-6: On the left hand side, select configuration , then select internet option. In right side click on the edit button of the suitable connection.

Step-7: New window will be opened, click on next.

Step-8: Again new window will appear, here you will see four option but you have to select either ppp over Ethernet or bridging. if you select bridging then click next again new window will be opened then click next. On the last window click on apply.

-9: if you select ppp over Ethernet click next , the window named "Configure WAN IP Settings" will be appeared, click next. The window for "Configure Broadband User Name and Password" will be opened, give the following details.

Service name: bsnl

User name:given by exchange

Password : :given by exchange

Select "always on " then next. On summary page click apply.

Step-10: On the left hand side, click on system click reset and restart. On the right side click restart without selecting factory default setting.

Step 11: if you earlier select bridge mode then you to create dial up otherwise in pppoe mode broadband will direct work .

2.
If you had used WIFI DL524 for Airtel, earlier
changes may not be required.
Connect and try.
3.
Feedback
Copy paste data here .No edit
ipconfig /all

Change the connection type to bridging as shown in the 3rd image. Then set the connection type in the wire router as PPPoE. Give the username and password given by the BSNL Exchange to connect to Broadband. Now actually the router will dial through the DSL modem and will establish the internet connection. PLease see the User Manual to set the appropriate security settings for your wireless network. Hope this would help you guys.

1.jpg

2.jpg

3.jpg

4.jpg

Attachment 7607

Thanks, I already configured