Thread: nokia-siemen C2110 router power problem

friends , it's not a big problem but i m just asking if anyone of u has too exp this thing and found solution if any

i got bsnl nokia-siemens -C2110 router and i connect to computer via usb and connect to bsnl via pppoe .while working (all the light on router ON) if i restart my computer then the PC/USB link dont glow up and the modem doesnt show up on computer while all other light (power,usb,data )glow .i would have to restart router or remove and reconnect the usb cable for it to show up .

i dont think this is my computer usb port problem because if i put some other usb device (pen drive,blutooth dongle ) and restart my computer they all show up good .

i already tried resetting my router and it didnt worked

Any time your internet worked with USBport
connection ?
Do you have ethernet card in your computer /
Did you try ther LANport option ?

my internet is working fine with usb port

. the only problem is that when i restart the computer while working then after the router dont come up by itself on computer it has to be restarted or more specifically the usb wire has to be removed and reinserted for the pc/usb link to come

never tried ethernet card ,i dont have one and probably i cant because i have a very large graphic card

specifically the usb wire has to be removed and reinserted for the pc/usb link to come

Before doing this, please check your Network connections , and
also in Device Manager.Seems the System is not
recognising the Hardware.( modem) connected to USB PORT.
When you reinsert the cable do you get message "New Hardware" detected ?

Originally Posted by essbebe

Before doing this, please check your Network connections , and
also in Device Manager.Seems the System is not
recognising the Hardware.( modem) connected to USB PORT.
When you reinsert the cable do you get message "New Hardware" detected ?

when i reinsert the cable the pcb/usb link glow simply and the router come on network connection .oh yes i do get the message of new "acquiring network address "for a second and everything goes fine from then .

i am still confused of this bug that why dont this thing require me to remove and reinsert cable rather then being automatic

Do Not remove cable and reinsert it.
Switch off/switch On modem and try.
Change the USB Port if another port is available.
Change the USB cable and try.
2.
In USB mode data transfer is at 11Mbps.
With LAN/ethernet card usually 100Mbps.
Your video/flash may take more time to load.

Originally Posted by essbebe

Do Not remove cable and reinsert it.
Switch off/switch On modem and try.
Change the USB Port if another port is available.
Change the USB cable and try.

done both no effect .switchinging off and on modem takes more time to all the lights of modem to glow

Originally Posted by essbebe

In USB mode data transfer is at 11Mbps.
With LAN/ethernet card usually 100Mbps.
Your video/flash may take more time to load.

it doesnt matter when the bsnl is providing just 256 kbps max in UL750.the video/flash i watch comes from internet not from some internal LAN

@lightgreen49
Thanks for the information. did not know earlier.

the video/flash i watch comes from internet not from some internal LAN

Originally Posted by essbebe

@lightgreen49
Thanks for the information. did not know earlier.

well thats true for anyone here the max speed bsnl or anyother broadband provides at this time doesnt exceeds the 10 mbps supported by USB and if someone is having a large video card generating lots of heat it would be much good if they prefer USB

i think we should focus on the problem of the router

see the annexure. speed 728 KB/sec !!!
More confusion !!!

Originally Posted by essbebe

see the annexure. speed 728 KB/sec !!!
More confusion !!!

dear essebebe , i m on BSNL 750 UL max they provide 32KBps period . never saw such speed even in dreams .
should we come back to the router problem

Modem on USB port No lan card . Home 750
connect/reconnect cable for each session
speed varies
.

1.Post ADSL data showing snr/attn/line rate/rate and mod selected.
2. Also post the FW version of your model.

Firmware Version V55.1.04.10


System Information
Equipment Vendor DSL MODEM
Model Number DSL
Firmware Version V55.1.04.10
DSL Firmware Version E.37.9.32
Serial Number 001E4003F41B
System Up time 04:55:22s

Internet Connection
DSL Status true
Last Failed 0x00000000
Downstream Data Rate 5344000
Upstream Data Rate 320000
SNR (Downstream) 11.5 dB
SNR (Upstream) 6 dB
Line Attentuation(Downstream) 26.0 dB
Line Attentuation(Upstream) 15.0 dB
Connected Standard G.Dmt --->in adsl snr increases but lots of calldrops

LAN Port
Mac Address xxxxxxxxxxxxxxxxxx
IP Address 192.168.1.1
DHCP server On
Subnet Mask 255.255.255.0

Originally Posted by essbebe

Modem on USB port No lan card . Home 750
connect/reconnect cable for each session
speed varies


.

on more info that evrythings plays well when computer starts for first time the problem goes on RESTART

@lightgreen49
I read your all post. The problem is your the computer does not recognise your USB port of your modem at the boot time ( when you see the Windows XP with blue bar at the boot time ). This problem occure due to hardware conflict between two devices, even if there is a problem from your Windows USB driver ( default install ).

If you have the Motherboard CD from the manufacture install the USB driver from the driver folder of your mainboard CD.

Originally Posted by Indranil

@lightgreen49
I read your all post. The problem is your the computer does not recognise your USB port of your modem at the boot time ( when you see the Windows XP with blue bar at the boot time ). This problem occure due to hardware conflict between two devices, even if there is a problem from your Windows USB driver ( default install ).

If you have the Motherboard CD from the manufacture install the USB driver from the driver folder of your mainboard CD.

the cd i have doesnt have anthing like usb driver it have only sound ,ethernet,graphic driver only .. but i think there is some problem in modem because if i put some other device like pendrive then ther is no problem in recognising it

^^^ it's a conflict between your USB address and modem usb address.

Test
uninstall the modem driver from your system. Then shutdown your computer and switch on agan ( dont restart after uninstall the modem usb driver )
check your computer recognise your modem usb port or not. If the modem is detected then your modem's LED glow up.

Info from Post No 1
[quote]1.my internet is working fine with usb port
2. No LAN Card >

@lightgreen49.
Wait.......