Thread: Connect Bsnl WIFI modem to Mobile or PPPOE Mod

See Post No 41.
Continue and reply in this thread. .
http://www.indiabroadband.net/bsnl-b...-one-time.html (How can i connect two laptop at one time)
Check MTU value 1492 in WAN page of modem.

If Google is working on other devices, there is nothing wrong in your WiFi settings. Change different MTU values (start from 1480 and add values by 10), see which one is working.

ok.........................

anyone help for connect wifi in micromax a60 in bsnl dsl router
plzzzzzz
plzzzzzz


help me

with photo so i can understand better

I am unable to connect to router 192.168.1.1 ...What i do??plz help....reply..

This may help

http://www.indiabroadband.net/broadb...no-access.html (192.168.1.1 No access !)

I hav changed all my settings of modem and its connecting to wifi but sometims wen i on my modem ..its saying ther is no wifi networks unavailable on my mob..then im gng to settings page thru 192.168.1.1>ADVANCED SETUP>LAN>(Its in ENABLED DHCP server mode) where im changing end ip address from 192.168.1.3 to some no. like 192.168.1.5 and restarting modem so net is connecting on mob...again aftr nxt use same prob so agn i shud go to this page and change 192.168.1.5(wich is previously entered) to some other of my wish greater than 2 at the end...like 192.168.1.4 or 6 or 9 or 15 watever and agn wifi is connecting on mob...my bro told to disable dhcp server mode..and i did it...this time it is finding wifi network on mob but it is telling "obtaining ip address" but even if i wait for 5-10 mins its stil shwing the same . Dont kno wich is correct...i checked with other modem of diff modem wer the entire option wer different..and searchd for many threads but i didnt find this case..plz rply me ...

Details of my model are:-
BSNL wifi modem
WA3002G4

WA3002G4

IN Lan page Enable DHCP give a range 192.168.1.3 to 192.168.1.50
SAVE REBOOT. wait for 2 minutes.

Feedback.

REF:UTSTAR WA3002-G4 quick reference

This may help

http://www.indiabroadband.net/broadb...tml#post325614

Originally Posted by lovepreet39

First see your mobile have wifi.
I have Bsnl iti modem.
Go to your browser in computer.
type 192.168.1.1
fill the user name and password
username = admin
pass = admin
Click on advance setup and then wan.
edit 0/32 column.
click next
chose ppp over enternet (pppoe)
Enter ppp username and password
ppp username = your bsnl username
ppp pass = your bsnl password
service name = dataone
click next and next
click on save and then click on save and reboot
MOdem will restart
pick up your mobile open browser and search for wifi and go.

tested with
modem bsnl iti
nokia n93i

same for all nokia n or e series and 5800xm like
If you have a different modem go to modem setting with 192.168.1.1
and look out for 0/32 column in wan option

NO need for any special software.

NO need to enable unup.

No need to activate gprs.

NO need to mention modem and mobile name.

Wifi settings for iti modem or other modems.
Enable WIFI-yes.
SSID- As you like (Example -ITI)
Network Authentication-open.
WEP Encryption-disabled.
AP Mode:Access point
Bridge Restrictisabled.

First of all I would like to thanks lovepreet39 for such detailed information. It helped me to connect my Nokia N8 to my BSNL ADSLII modem. Now the problem is that, if I configure modem to PPPoE mode, my mobile as well as Laptop gets connected, but I get an error code "676: The Phone line is busy" while trying to connect my PC which is connected with the modem via wire. If I turn on the bridge mode, I am unable to connect my Nokia N8 to the internet through wi-fi. So it seems like every time I need to change the settings to PPPoE or Bridge mode if I want to connect to Nokia N8 or PC respectively. Can you please help me with some settings where both my PC and Nokia N8 will work, not simultaneously, but any one of it without changing the protocol mode to PPPoE or Bridge specifically. Is there any way to do that? Your earliest reply is highly solicited.

ya now i can browse in my mobile but the new problem is that my network now became open and it can be accessed by any one ....so kindly fix my issue.......

hve the sme modem......as u answered i do everything...now its starting wi fi connection with my mobile......be till now its not connected with pc.....showing errors......

and when i changed the setteing to bridge it not connected with wi fi....