Thread: Frequent connection problem in bsnl.

I am using wa3002g4 modem of bsnl. The connection is not at all stable and many times it is showing as user id or password is wrong (i have enabled "retry on wrong password" in the modem).
whether it is any problem in my modem or with bsnl.after 2 or 3 rebooting it is again working.

kindly help.

Carefully enter your USERID without @ bsnl.in
Also password Once entered correctly no question of error.. ( In modem )
Uncheck the box you have mentioned.
.2.
Presume you connect ALL phones AFTER the adsl splitter.
3
Also In DSl menu page Uncheck adsl2+
Save reboot . wait for two minutes.
http://www.indiabroadband.net/bsnl-b...t-working.html (ADSL DATA -Phone not working)
feedback.
For future reference (Bookmark if needed )
http://www.indiabroadband.net/bsnl-b...tml#post208783 (UTSTAR WA3002-G4 quick reference)

dear essbebe
i have connected the phone after modem only.the adsl2+ is also unchecked.I have enabled the mentioned retry butoon because before that when my connection was down i run diagnostic it came as test authentication with isp as fail.

kindly advise

Post Ipconfig /all data.
For frequent disconnections , under Management see Tr_069 client box.
if enabled disable it.
Report your modems snr attn data
First five lines : copy/paste.

the ipconfig data is as follows:
hostname: ramesh
primary dns suffix :
node type : unknown
ip routing enabled: no
wins proxy enabled : no
ethernet adapter wireless network connection
connection specific dns suffix:desription:atheros ar5006eg wireless network adapter
physical addr:00-15--------
dhcp enabled :yes
auto configuration enabled:yes
ip address:192.168.1.2
subnet mask:255.255.255.0
default gateway:192.168.1.1
dhcp server:192.168.1.1
dns server :192.168.1.1

modem data:
Device Info

BoardID: 96338W
Software Version: 1132_061507-3.08L.BSNL_02.
Bootloader (CFE) Version: 1.0.37-8.7
Firmware Version: WA3002G4-0021.01
Hardware Version: WA3002G4 1.0
Model Name: WA3002G4
Wireless Driver Version: 3.131.35.6.cpe2.0a.s

This information reflects the current status of your DSL connection.

Line Rate - Upstream (Kbps): 679
Line Rate - Downstream (Kbps): 2044
LAN IP Address: 192.168.1.1
MAC Address: 00-1b-da-33-fb-f7
Default Gateway: 117.199.224.1
Primary DNS Server: 218.248.255.146
Secondary DNS Server: 218.248.255.212

What is your SNR value
Check the ADSL status

where i will get the snr value, i am new to all this
kindly help

Type 192.168.1.1 in your browser, ID and password admin. Browse through the pages to find the snr and attenuation values. Hope this helped.

i think i have got it:

Mode: ADSL2
Line Coding: Trellis On
Status: No Defect
Link Power State: L0

Downstream Upstream
SNR Margin (dB): 33.2 6.1
Attenuation (dB): 33.5 27.4
Output Power (dBm): 12.3 19.6
Attainable Rate (Kbps): 11582 672
Rate (Kbps): 2044 679
MSGc (number of bytes in overhead channel message): 77 16
B (number of bytes in Mux Data Frame): 46 8
M (number of Mux Data Frames in FEC Data Frame): 1 16
T (Mux Data Frames over sync bytes): 1 3
R (number of check bytes in FEC Data Frame): 16 16
S (ratio of FEC over PMD Data Frame length): 0.7790 7.0718
L (number of bits in PMD Data Frame): 647 181
D (interleaver depth): 32 2
Delay (msec): 6 3

Super Frames: 1608017 3463027
Super Frame Errors: 0 571334
RS Words: 133465494 811370
RS Correctable Errors: 4 58265911
RS Uncorrectable Errors: 0 N/A

HEC Errors: 0 383265
OCD Errors: 0 0
LCD Errors: 0 0
Total Cells: 125269369 3956122326
Data Cells: 1428997 15727862
Bit Errors: 0 43381653

Total ES: 0 9685505
Total SES: 0 9430223
Total UAS: 17 9427840

Your attenuation values are a bit. No wonder you are getting disconnections.

Refer this table

@Ramesh123
Problem from your BSNL exchange, not from your side.
For the attenuation I dont think disconnection happen Frequently

Check your ADSL2+ and other mode options is tick off or not, except G.DMT
Tick on only the G.DMT
because your line rate shows 2044Kbps not the 2048Kbps

Open DNS page and enter these values.
Save REboot wait for two minutes.


//i23.tinypic.com/oidiro.jpg
check ADSL stats.for any improvement

You can copy/paste first five entries only.