Thread: Not able to portforward UT300R2U

My uTorrent speed is very slow - around 80-90 KB/s . it says "port not open . but u r still able to download" . i am not able to forward ports in UT300R2U. i dont have the NAT option under Advanced setup nor do i have the virtual server. I am in bridge mode mode. plz help.

PS : i used to get 230 KB/s speed in the same torrent around 2 months ago.

i use H500C+ plan

i use the old firmware i guess...

heres a screenshot : img1.uploadscreenshot.com/images/orig/3/6001563555-orig.jpg
add an http before the URL.

Switch to bridge mode. All ports are open by default.

then y does utorrent say port not open ?

Originally Posted by shubham96

then y does utorrent say port not open ?

Are you in bridge mode ? If yes, configure your firewall to allow assigned port open.

PPPoE - ID and password stored in the modem.
Bridge - We need to dial using a dialler.

Try this

Port Forwarding Utorrent on the UTStarcom UT-300R2U

Originally Posted by shubham96

then y does utorrent say port not open ?

Leave all the things, just try two ports:
1. 6969
2. 1

These are always open......

I am in bridge mode mode. plz help
UT300R2U new supplied by BSNL may not have the NAT options other than DMZ
2.
Also the page will be hidden if you
connect in "bridged" mode
( UserID PW not stored in MODEM )
3.
If modem purchased/on rent / try for exchange
you may get ZTE ZXDSL 831AII
or upgrade to WIFI routers (3in 1)
4.
Firmware Upgrade is possible, but
not recommended, except for advanced
users, and those who can take the risk, even if the modem becoming completely useless.
5.
Copy/Paste data here from 192.168.1.1/look.html

Device Info

Board ID: 96338L-2M-8M
Software Version: 3.08.BSNL_02.01.09.
Bootloader (CFE) Version: 1.0.37-8.7
Firmware Version: UT300R2U.0011.01
Hardware Version: UT300R2U 2.2
Model Name: UT300R2U

This information reflects the current status of your DSL connection.

Line Rate - Upstream (Kbps): 861
Line Rate - Downstream (Kbps): 12843
LAN IP Address: 192.168.1.1
Default Gateway:
Primary DNS Server: 208.67.222.222
Secondary DNS Server: 208.67.220.220



is this wat u wanted ??????
i had taken risk of upgrading to Dlink firmware.... but again restored it from my modem cd. maybe if u upload the newer UT300R2U firmware , i can try using virtual server.

Signup to a private traker and download every thing from there.
Limit your upload to 15 KB/s.

What result does http://speedtest.net says???

Problem
Firmware UPgrade to get NAT options
Always use short "quote" and reply by number to my post/s
See the difference

5.
Copy/Paste data here from 192.168.1.1/look.html

REPLY from my modem 110BX1

µÍ³ÐÅÏ¢

Èí¼þ°æ±¾ V8.24.01.01
Èí¼þ±àºÅ T2Q-0Q-007
SVN°æ±¾ 3.12L.01_India.13
±àÒëÈÕÆÚ Wed Apr 16 13:12:33 CST 2008
¹Ì¼þ°æ±¾ 3.12L.01.A2pB023k.d20k_rc2
CFE °æ±¾ 1.0.37-0.7
IP µØÖ· 192.168.1.1
MAC µØÖ· 00-1e-40-ba-cc-44
ÉÏÐÐËÙÂÊ (Kbps) 1024
ÏÂÐÐËÙÂÊ (Kbps) 2560

Now see what information is available.
confirm you got the same data reported by you is from 192.168.1.1/look.html.
and not 192.168.1.1/
Device Info.

Para two:

i had taken risk of upgrading to Dlink firmware...

Good show. I think you can safely upgrade Beetel
Firmware ( easily available), provided you know how to restore original Fw, if something goes wrong!
What is of the effect of upgrading with DLink FW?
First condition:
1.Hardware board should be same. YES
2. CFE should be same ( preferred) Yes
3.get old version of FW..................... YES
4. Check the Software version ............YES

If all 4 yes , then worthwhile trying a FW upgrade.

Now see what information is available.
confirm you got the same data reported by you is from 192.168.1.1/look.html.
and not 192.168.1.1/
Device Info.

I got the data from 192.168.1.1 coz when i add /look.html , the website does not load

i am ready for a FW upgrade. btw do i get the virtual server option enabled if i upgrade my FW. which beetel modem's firmware should i upgrade to ? can u plz upload it here or give me links ?

Device Info Beetel 110BX1

Board ID: 96338L-2M-8M
Software Version: 3.12L.01.A2pB023k.d20k_rc2
Bootloader (CFE) Version: 1.0.37-0.7

Should I PM link for loading an older version Firmware of Beetel ( via command prompt ?) to restore Nat/Port triggerring/virtual server options.?

Wait .......

In "AlwaysOn" mode I get the following additional options under NAT
NAT/VIRTUAL SERVER
http://192.168.1.1/scvrtsrv.cmd?action=view
PORT TRIGGERING
http://192.168.1.1/scprttg.cmd?action=view
DMZ
http://192.168.1.1/scdmz.html
MultiNAT
http://192.168.1.1/scmunat.cmd?action=view
NAT Sessions
http://192.168.1.1/viewconlimitlist.cmd?action=view
DNS
http://192.168.1.1/dnscfg.html
DynamicDNS
http://192.168.1.1/ddnsmngr.cmd

Try, whether pages have been removed in your Software version.
Para two:
AT YOUR OWN RISK ANY FIRMWARE UPGRADE

http://www.google.com/url?sa=t&sourc...t92mqsDDukbu_Q

except for the DNS , for everything it says page not supported

from another forum my post:
Para two:
AT YOUR OWN RISK

Older version on "cmd' method :
Download link: MEGAUPLOAD - The leading online storage and file delivery service
Filename: upgradebeetel tool.exe
Filesize: 1.9 MB
Description: Beetel Firmware update

Better to have a standby modem. Cost Rs 1000/=
or on rental Rs 40/PM !!!!!!!

hey plz help me . i ran the beetelupgradetool . it said it had updated as in the pic u gave in ur post but wen i went to 192.168.1.1 it was the same old one. today when i resumed the download at 5am, at first it went over 200kB/s for 30 secs and then came down to 20kB/s till 7.30am. maybe i have wrong uTorrent settings. it says "port not open ( u r still able to download)". shall i use utorrent 2.0 . maybe i should downgrade to 1.8. will i be able to resume my downloads from 90% ? (today i completed 90%) plz help

utorrent screenshot : i48.tinypic.com/2jdp2rb.jpg

Originally Posted by shubham96

hey plz help me . i ran the beetelupgradetool . it said it had updated as in the pic u gave in ur post but wen i went to 192.168.1.1 it was the same old one. today when i resumed the download at 5am, at first it went over 200kB/s for 30 secs and then came down to 20kB/s till 7.30am. maybe i have wrong uTorrent settings. it says "port not open ( u r still able to download)". shall i use utorrent 2.0 . maybe i should downgrade to 1.8. will i be able to resume my downloads from 90% ? (today i completed 90%) plz help

utorrent screenshot : i48.tinypic.com/2jdp2rb.jpg

Yes. You will able to resume your download from 90 %. All you need to do is set the directory with 90 % completed file as default directory.

1.
You used the tool to change your Fw version.
Modem still in working condition! ???
confirm the FW details appear different..
Now confirm whether , you are getting the Advanced options under NAT.

Regarding torrent downloads follow
@meetdilip 's suggestions.

to forward port in ut300r2u.... got to the NAT option in ur router (192.168.1.1)
and write down ur ip that is 192.168.1.2 (common ip) and save...thats it done... works 100%....also forword ur port in ur firewall...


to see ip address ..... run/cmd/ipconfig/enter...

@superman2010
Problem from Post 1.

My uTorrent speed is very slow - around 80-90 KB/s . it says "port not open . but u r still able to download" . i am not able to forward ports in UT300R2U. i dont have the NAT option under Advanced setup nor do i have the virtual server. I am in bridge mode mode. plz help.

Under Advanced Options NAT
Virtual Server
port triggering
options were not available in UT300R2U.
So @Shubham96 has tried a Firmware change
successfully to get those options. ( In 'Always On" mode)
Now he has not confirmed whether the options are available now.


2 Any way thanks for the information. posted. .

messed up my ut300r2u. bought a DLink GLB-802C modem for Rs1700. This time i didn't buy from BSNL , They delete all good features . well this has a port forwarding feature and i can port forward. uTorrent says the port is forwarded.But i want the Optimal configuration settings for this modem

Follow this link for complete step by step guide: hari-techspot: How to Port Forward on UT300R2U Modem and comment on the post for any clarifications.