Thread: Making DATAONE connection wifi- usind UTstarcom modem

i have a BSNL Type II modem (Wifi modem) Utstarcom... right now im connecting using the LAn cable , i want to make it connect automatically when the modem is switched on, so tht i can use it with my mobile, pda and laptop,, i habe done it before by just changing the "Connection type " in modem configuration by selecting "PPP over ATM" and it worked fine then, but then i just used it as a trial and changed back to the normal LAN method, when i try to change it now, i am not getting connected.... dont know why... im using Win Vista now... is there anything else to change? like IP or subnet mask or somethin?

pls help.....

Selection is ok.
Enter your UserId and Password.
In Lan
enable dhcp . Save reboot.
Presume you know how ro do wireless settings.
Anyway , for full settings this link may perhaps help.
Mention your modem/model/make/number .
http://www.indiabroadband.net/bsnl-b...tml#post208783 (UTSTAR WA3002-G4 quick reference)

http://www.indiabroadband.net/attach...d-ipconfig.jpg

I have similar problem. My modem is same.


I can get connected on wi fi but only "one computer at a time "

How do i connect multiple computers on wi fi?

Step 1 :
Access Modem Router Wa 3002_g4
Go to tools
Save/Backup present settings
Say to C:/My Documents/ WIFI settings router.
confirm here.
step 2:
Enable DHCP in modem ( See Lan setings page)
Step 3 :
In Computer/laptop
Start /Network/LAN/WLAN
properties
New settings page opens
select
tcp/IP
properties
Select
Obtain IP address automatically.
Apply Save
Step4:
If any problem still copy/paste here
ipconfig /all
http://www.indiabroadband.net/attach...d-ipconfig.jpg

Originally Posted by idea

I have similar problem. My modem is same.


I can get connected on wi fi but only "one computer at a time "

How do i connect multiple computers on wi fi?

u need to be in PPPoE mode for multiple connections at a time.