Thread: cannot open 192.168.1.1

My modem model is utstarcom WA3002g4. I want to change the router configuration to set up wifi access but i tried to open 192.168.1.1 in IE as well as firefox. in firefox, the error is "The connection has timed out" & in IE it shows "Internet Explorer cannot display the webpage". My OS is vista. I have also attached the screenshots of the error pages. plz guide me how to solve this prob.

Enable/dISABLE Local Area Network
Plug off/Then Connect All wires of Your Router!
May be it could open the page

WELCOME to IBF!

I too use this modem.
First try open DNS.USe the following DNS servers:

208.67.222.222
208.67.220.220

if not working then look for a hole on the right bottom of modem.take a pen \and press in the hole.it will reset the modem and then try to open 192.168.1.1.

Go to this site

What Is My IP Address? - Lookup IP, Hide IP, Change IP, Trace IP and more...

Note down your IP address and type it in the browser. Check whether it works now. Feedback.

see post No 4.

First of all thank u all for replying. I tried all the given instructions. Turned off & reconnected the wires, cheked the IP address, checked the DNS server but nothing worked. I also tried to find the reset button/hole but could not find it. is there any other way to configure the router/modem for wifi access?

Reset will the next best option. Try to find a small hole in the bottom or backside. Use a refill, press and hold for 30 seconds.