Beetel 220bx adsl2 Query (SOLVED) I am using beetel 220bx adsl2 modem for bsnl broadband.
Presently...I am using bridge mode and want to convert it into pppoe mode.
I tried doing the same by : (in modem page i.e 192.168.1.1/main.html)
1) Selecting the pppoee mode over bridged mode.
2) Provide username, password and service name in the next page.
then Save/Reboot.
(IP4 address : Obtain IP addresses automatically)
After this...can't able to connect to net.
But bridged mode is working with no probs....
Last edited by bajaj151; 04-13-10 at 02:29 AM. Reason: Problem Solved
In PPPoE mode you need not use the dialler. Configure the modem in PPPoE mode, take the browser and click the address in the address bar and browse. Hope you have not missed this.
Originally Posted by meetdilip
Ya..I know...in pppoe mode...we dnt have to use dialer...
But prob is still dere
Must be some error in the configuration. Can you please post the screen shots.
http://210.212.160.18/broadband-conf/dareglobal.htm
Check GOA link given
screen shots for dareglobal from GOA bsnl site.
Menu pages will be same. Enable DHCP in modem
OR
folllow instructions step by step given in
MP BSNL website for New model Ut300r2u.
New Page 1
New Page 4
feedback.
Last edited by essbebe; 06-10-11 at 06:19 PM.
Still same prob...dnt knw whats going on..
Last edited by bajaj151; 04-13-10 at 02:24 AM. Reason: Prob solved !!
@bajaj151
Enable the NAT Firewall, Check On this option on your router.
Your problem will be solve.
I check both Enable NAT and Enable Firewall...
But prob is still dere
copy paste /ipconfig /all
As you say in "Bridged: mode Ok
only difference in PPP/PPPoE is entering UserId and PW.
Diagnostics page shows all Ok.
Only difference i found with identical Modem ( in use by me now ) IGMP is disabled.
Instead of Browser, try OE/ Outlook and Yahoo Messenger.
( Long back BSNL advised to use ONLY "Bridged" mode for this type similar router.
Feedback.
Last edited by essbebe; 04-12-10 at 11:58 PM.
................................................
Last edited by bajaj151; 04-13-10 at 02:25 AM.
IN Network settings
Disable IPV6 ( seems your Os Vista ?)
In modem DNS page uncheck
assign DNs automatically and enter
208.67.220.220 and 208.67.222.222
Google DNS
8.8.8.8
Also in TCP/IP properties
DNs
same entries
Apply Save.
Feedback.
PM your Dynamic IP . to re check modem settings.
To know where it is : Scroll Down
Last edited by bajaj151; 04-13-10 at 02:26 AM.
Type 192.168.1.1 in the browser, ID and password admin. Browse through the pages.
192.168.1.1/main.html
Advanced Options
DNS here
( Dynamic DNS)
Very wired problem, enable NAT and not working
Delete the Pvi/Pci entry of 0/35 and make new one with NAT and IGMP enable Tick ON
It should work, and dont forget to Save/Restart the modem. If still not resolve then your problem can't be solve by your hand, it's time to call an expert
try this address
http://206.190.60.37/
type this address in your browser address bar, if the page will load then check the DNS address in your lan card.
@essbebe
Its working now !!
Problem is as soon as I choose OBTAIN IP ADDRESS AUTOMATICALLY..Net disconnects
Last edited by bajaj151; 04-13-10 at 10:48 PM.
^^^ Congrats
So you now browsing your net through Active NAT
or you still on Disable NAT
@bajaj151
Congrats.
Now may I advise you ( I am not an "EXPERT") to make a back up or Save the present settings of the modem ( see Under Tools menu)
to say C:/My Documents/220BX workingIBF.
2.
Please reconfirm, Internet started working In PPPOE mode, after whatever changes were suggested here
a)@indranil (active NAT/NAT/IGMP etc)
o(b) @essbebe ( DNS change disable IGMP etc )
(c) any other changes NOT suggested in this thread.
3.
Your Diagnostics report showed that all settings in Modem was correct. and In "Dialer" "Bridged"mode, you had no problem to connect to Internet.
4.Wait ....
(a)In you Modem, check carefully any Selection Box for MTU.
(b)Did you enable DHCP (In LAN settings page
and given range say 192.168.1.2 to 192.168.1.10 ?)
(c) Try the FIRST DNS as 8.8.8.8 in both modem and Network settings/ TCP/IP/Properties
page.
Please Postipconfig /all copy/paste here.
Feedback please . ( to guide other members at a later date.)
As suggested by :
Indranil: Enabling NAT and Firewall (Checked) --> Didn't wok for me.
Then,
Essbebe: DNS change disable IGMP etc --> I added DNS only and it WORKS !!
And after that I also enabled NAT (as suggested by Indranil)
--> Disable DHCP is Selected
--> I used DNS as 208.67.222.222 & 208.67.220.220 (in both modem and lan seeting)
Rest everything is discussed regarding other changes.
--------------------------------------------------------------------
[/QUOTE]
---------------------------------------------------------------------
Last edited by bajaj151; 04-13-10 at 02:10 PM. Reason: Automerged Doublepost
From the screenshot of @bajaj151 ( which is deleted now by bajaj151) says The NAT service was Disable. Without the NAT service not possible to pass through the packet from Private IP to Public IP, user generally says it allwase ON mode or PPPOE from modem.
The above screenshot taken from @bajaj151
He is now able to browse the internet using PPPOE from modem because the NAT service is now enable. @bajaj151 can disable the NAT again and try to surfe the internet for testing.
The screenshot clearly says what was the main problem for not being able to browse the Internet
The DNS was set to Default BSNL DNS, I dont think that the DNS was the main issue for not able to browse the internet.
above screenshot from @bajaj151
Last edited by Indranil; 04-13-10 at 02:45 PM.
@Indranil
I added DNS and enable NAT simultaneously...
and it works.!!!
But problem is as I remove the DNS address from modem setting...Net stops working...
Other problem is : As I select obtain ip and dns automatically...Net stops working
If you dont want to use DNS address on your modem then remove DNS address from your modem but set DNS address on your LAN TCP/IP address
218.248.255.194
218.248.255.196
Or Enable Automatic assigned DNS on your Modem DNS settings
Enable DHCP on your Modem
@bajaj151
A link with screen shots was given to you for your modem settings.
Why did you delete annexures and Ipconfig /all data?
1/
FROM POST No 8 of @bajaj151
From post 19As suggested by :
Indranil: Enabling NAT and Firewall (Checked) --> Didn't wok for me.
As you have messed up/edited the thread posts, and seem to try different permutations /combinationsThen,
Essbebe: DNS change disable IGMP etc --> I added DNS only and it WORKS !!
And after that I also enabled NAT (as suggested by Indranil)
better consult an "Expert", as suggested by @
Indranil
Last edited by essbebe; 04-13-10 at 04:57 PM. Reason: Automerged Doublepost
@ essbebe
Everything is working fine now.
Congrats.
Please make a backup of present modem settings.
There are currently 1 users browsing this thread. (0 members and 1 guests)
LinkBack URL
About LinkBacks
Reply With Quote
