India Broadband Forum

danappan

Hi guys,...

...I am planning to shift to BSNL from my lousy Asianet ISP which bills me 730rs/month for 128kbps unlimited. The actual speed no way reaches even 100kbps. ... Comming back to my problem.. I have a tata indicom adsl modem, got it from a friend, and would like to know if I can get it configuired to be used with a BSNL connection. The make of the modem in hand is
SMC EZ Connect ADSL/USB modem - SMC7003 USB V.2

here's a link to how it looks and some specs : SMC EZ Connect SMC7003 ADSL USB Modem V.2 : Read reviews and compare prices at Ciao.co.uk

Thanks in advance guys.. Any and all help will be greatly appreciated.
Danappan

mmm

yes , it can be used for BSNL Broadband connection .
you have to install its drivers [for USB connection] .

Just remember to use correct values for vci , vpi ,
IP address , Gateway , DNS entries etc ...

see Dataone user manual for more details : Link

danappan

Thanks mmm,

ITs good enought to know that it can be configuired to be used with dataone. But the link you sent me cant be reached, i guess you reached the page after logging into the Sanchariak website? if so that might be the problem.. I did see admin mentioning about the user manual in another page with a link to rapidshare, where he'ad uplded it to, but the file there has been removed. So if there's some place else where i can get the doc. pls let me know.. thanks a million, mate..

cheers
danappan.

mmm

^ Danappan , I have checked the given Link . it is working .
No password is required . The document can be saved or
viewed directly . And if you have any specific questions
pls donot hesitate to ask . we will try at our level best ...

danappan

Dear mmm,

thanks again, but talking about installing the modem, I accidently installed it as an adsl WAN modem, though there was an option to install it as an LAN modem. So is it Ok if it is installed as a WAN modem??

mmm

^ The modem should work fine even if it was installed
as a WAN modem . However we generally suggest
to use a modem thru ethernet (LAN) port for more
stability . since this SMC7003 modem has only USB
port , we may not get good connection from it ...

tanmoy

Dear mmm,

I have got one smc 7003 usb modem which I wish to use with dataone connection. All installation instructions I have been able to gather showing configuration of all modems through lan card oly however my modem has got only one USB port. Pls. help me.

Tanmoy

mmm

@ tanmoy
the configuration settings are same for a USB modem . We
have to select whether we need bridge mode connection
or PPPoE connection in the modem .

The main thing with the USB modem is that we need to
install the modem USB driver software into our system .
The modem will not work without the drivers installing .

If we use bridge mode in the modem then we have to use
a software dialer to connect to internet . i.e. we run a
shortcut on desktop to connect to the net .
To disconnect from internet , we have to use the icon
available at windows system tray .

If we use PPPoE mode in the modem then whenever we
switch on the modem - we will be connected to the net .
To disconnect , we have to switch off the modem .

Subrat

Hi,
I have the same modem as yours. Can you plz give me your modem driver for SMC EZ Connect ADSL/USB modem - SMC7003 USB V.2.

Thanks a lot in advance.
Subrat (subratnsubrat@yahoo.co.in)

nsuresh

Hi,
I have the same modem . Can you plz give me your modem driver for SMC EZ Connect ADSL/USB modem - SMC7003 USB V.2.or link where i can collect


Contact Details Removed ~smoothvibes~