Thread: Need urgent help for modem setup...please help.

Helo friends,
i am having a BSNL broadband connection. i earlier had a modem wid only a LAN port. so nw from a friend i got Beetel 450bx1, which he got wid his airtel connection.
after reading sum discussion threads here, i tried setting it wid my broadband line, but i was unable to open the login window, i.e.197.162.1.1 , bt the explorer couldn' open it.
i tried many times bt it ain't working.
Please help.
m a newbie at it, so no prior knowledge of nything like this, so if possible please provide me wid step by step process.

thnx

type error?

login window, i.e.197.162.1.1

try 192.168.1.1 admin PW password.
Check this link for full screen shots.
http://chennai.bsnl.co.in/BBS/WA3002G4.htm

sorry it was a type error, it's 192.168.1.1
and when i enter, the window dsnt open.

which link for screen shots??

Follow the steps in this thread.

http://www.indiabroadband.net/broadb...nectivity.html (How to repair - Limited or No connectivity)

Once finished,

Start > run > cmd > ipconfig/all, post the screen shot.

If you have an exisiting setup working with another modem.
Check
Start NETWORK LAN
Properties
Network settings
select TCP/IP
Properties
New page
see this
192.168.1.10 ( or blank)
255.255.255.0 ( or blank
192.168.1.1 ( or blank) ( * modem IP access )
If all are blank
enter above data
Apply SAVE.
Now connect Beetel 450BX and try
If you access modem refer the link given earlier.

Worst CASE: RESET the modem with power on for for 20 to 30 seconds. Factory settings will be restored.
( RESET access in the rear or a small round hole
near right side bottom ) access with ball pen refill

Feedback.

i did do the TCP/IP changes and jus after doing tht, the modem was dejected i.e. the modem seems to b not connected. i once again tried to restart the modem, the green lite nd orange lite at the laptop flashed for 10 sec ( where the LAN is connected) nd thn again the modem is nt connected. i revert back to my old modem of single LAN, even tht dsn't connect, so nw i again change the TCP/IP adresses to Default. nw the old modem is connecting, bt The beetel 450Bx1 is nt connecting. i tried the hard reset bt still no effect

so nw i again change the TCP/IP adresses to Default.
nw the old modem is connecting,
beetel450Bx1isnt connecting.

Please mention old modem /model/make/number.
Is it Ut300R2 ?
http://www.calcuttatelephones.com/da...all/mdm02.html
Post this data ipconfig /all

alrite, so here's the exact situation. i use windows 7, so in tht network properties the TCP/IP option is nt thr, instead thr is two options, IP version 6 (tcp/IPv6) and IP version 4 (tcp/IPv4)
i made changes as u said in the ipv4. it din work again. so i tried to uncheck ipv6 nd thn tried, again no effects.
the old modem is D-link DSL-502T. please help.

Start RUN type cmd OK
New window
typeipconfig /all
Copy/Paste data here.

Confirm you can now access Modem settings. pages of Beetel 450 BX1