Page 1 of 4 1234 Last
  1. #1
    Junior Member

    Join Date
    May 2010
    Posts
    4

    Exclamation Multiuse Configuration of BSNL Teracom Type 2 Modem (with 4 lan ports)

    I have taken recently BSNL connection have been give TERACOM Tyep2( T-2B-Gawv1.4U10Y-BI) with 4 lan Ports . But they have done configuration for only one port because i was not able to connect internet on more than one PC . When two lan ports are connected to different Pc or even i am not able to connect 1 PC & 1 Laptop (wireless) so its now even configured for one LAN & one WLAN .
    I tried hard but was not able to configure the setting in modem settings at 192.168.1.1
    Please if anyone knows the setting let me know the same ....thanx in advance

  2. #2
    The Wizard
    meetdilip's Avatar
    Join Date
    Aug 2009
    Posts
    8,786

  3. #3
    Junior Member

    Join Date
    May 2010
    Posts
    4

    Default

    Non of it seems to be working for me .... i have gone through the complete article in that link also downloaded the zip for settings but the interface(modem interface) shown there is altogether different from mine & has lots of changes in options so i m not able to do the configuration .... PLz help

  4. #4
    LEARNER

    Join Date
    Aug 2007
    Posts
    15,283

    Default

    TERACOM Tyep2( T-2B-Gawv1.4U10Y-BI)
    Assuming you know how to change settings, go to LAn page and enable DHCP and give a range.
    ( if somewhere you find UpNP box enable it also
    (optional)
    Reboot wait for 2 minutes.

    2.
    Now in each computer/ desktop/laptop
    Start Network Properties
    network Settings page
    Highlight TCP/IP
    properties
    Select Obtain Ip address automatically
    SAVE APPLY.

    If still problem
    Copy/paste ( without edit )
    start run type cmd ok
    typeipconfig /all

    I have most screen shots for this router and appears same siemens C2110
    menu pages ( less wifi )
    More...>>> on <<<<== Feedback!

  5. #5
    Junior Member

    Join Date
    May 2010
    Posts
    4

    Default Still not working

    I have configured DHCP server for the range of 192.168.1.2 to 192.168.1.40
    and my computers have ip in same range ...then also i m able to connect a single PC at a time to internet. both the PC are LAN connected to Router i have also tried to ping the router from both PC's its working fine no data loss.

    Then to i m able to connect to net single PC at a time..have attached to some screen shots to get idea of modem interface...
    Attached Images Attached Images

  6. #6
    Platinum Member

    Join Date
    May 2008
    Posts
    812

    Default

    Your problem solution is very simple

    Use PPPOE on your modem instead of Bridge mode. Setup your Router in PPPOE mode and use user ID and password in there. In PPPOE mode you dont need to log in from your Computer Desktop. After that you can browse more then one computer.

  7. #7
    Junior Member

    Join Date
    May 2010
    Posts
    4

    Default

    Thanx Indranil ... it worked ..thanx again

  8. #8
    Platinum Member

    Join Date
    May 2008
    Posts
    812

    Default

    You are Welcome

  9. #9
    LEARNER

    Join Date
    Aug 2007
    Posts
    15,283

    Default

    @meetdilip
    Please give this link in future.
    http://www.indiabroadband.net/attach...ons-primer.zip

  10. #10
    The Wizard
    meetdilip's Avatar
    Join Date
    Aug 2009
    Posts
    8,786

    Default

    Ok........................

Page 1 of 4 1234 Last

Similar Threads

  1. Replies: 13
    Last Post: 24th July 2013, 07:02 AM
  2. Bsnl teracom t1-bdsl699e9-4u6-5 modem configuration problem
    By chhoton in forum Modems and Routers
    Replies: 0
    Last Post: 30th April 2013, 08:06 PM
  3. Replies: 9
    Last Post: 10th February 2013, 12:43 PM
  4. Replies: 1
    Last Post: 8th November 2012, 05:40 PM
  5. BSNL TYPE II CPE AR800V v3.0 WITH USB AND VOIP PORTS
    By mvb4u in forum BSNL broadband
    Replies: 8
    Last Post: 10th July 2010, 08:47 AM

Posting Permissions

Log in

Log in