Thread: Internet not workin via Ethernet

I'm havin bsnl broadband. My net does not run on when connected via Ethernet wher as runs on USB.Ethernet lights blinking adsl lights blinking network connection says network connected.Wat is the problem os-win xp servc pak 3... pls help me out

//Moderator note: You have not activated your account and hence your posts are going into moderation queue. Please click on the link in the mail you received from the forum admin in your mailbox. Failure to do so will cause all your posts go into moderation.
- just4kix

Mention modem/model/make/number.
see this link and select your model for settings.

cant see any link above
make:Huawei
model:SMARTAX 841
os:windows xp serv pak 3

ipconfig/all status:
Windows IP Configuration

Host Name . . . . . . . . . . . . : king-601768c371
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8169/8110 Family Gigabit
Ethernet NIC
Physical Address. . . . . . . . . : 00-1D-7D-8E-FA-E1
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.1
Lease Obtained. . . . . . . . . . : Thursday, May 06, 2010 5:10:35 PM
Lease Expires . . . . . . . . . . : Thursday, May 06, 2010 7:58:35 PM

I'm able to open the modem page(198.168.1.1) and enter pass also but once i click other links like yahoo etc the status bar says connecting then,connection to the server was reset msg will be displayed..i use mozilla browser,
firewall options of xp are off..
scanner i'm using AVG 9

Which DNS do you use ? Try Open DNS



Or Google DNS

8.8.8.8, 8.8.4.4

Have you connected both USB cable and Lan cable to the computer./
After testing USB port connection is working remove it.
Reconnect Lan Rj45 and try.
same Ipconfig /all will show 192.168.1.1
use the dns suggested above.
I forgot to give the link . sorry.
Check summary page and give feed back.
Lanport 0 35 should show green.

first check out inthernet properly connected to cpu.
second check when u put the lan cable then light blinking.
third check lan enable or disable.
fourt check properties of lan of in device manager lan driver install properly or not.


plz check these issue first then tell me again u getting propelm u can call me (919936800201) and this is skype id gaurav2394
yahoo id gaurav2394@yahoo.com
gmail id gauravshukla39@gmail.com

Regards
Gaurav Shukla

still the same:'(:'(
I'm running on usb only not both
I used the Above DNS still no change.
chekd is device manager device enabled..
light is blinking at the ethernet pluggin port
in modem port 4 led is glowing
link (ADSL) is orange which means connectivty
strange thing i found is in device manager a similar to network adapter something called JUNGO was there wat the hell is this anybody...

It can be the nic problem also. Try udating its drivers.

@srinidhi
the link.
SmartAX MT-841 ADSL MODEM (Type-IV) MENU

i tried scan for hardware changes..
and is there a possibility to upload drivers from net if so pls let me kno.
wat is this strange problem me ethernet is having

which mode you are using to connect Bridge mode or PPPOE mode?
Are you able to open the modem page? IF yes then run a test there depending on your modem there must be some option wherein it will check all connection and then give report. Also check if you can use gtalk etc in ethernet.

Originally Posted by Srinidhi

still the same:'(:'(
I'm running on usb only not both
I used the Above DNS still no change.
chekd is device manager device enabled..
light is blinking at the ethernet pluggin port
in modem port 4 led is glowing
link (ADSL) is orange which means connectivty
strange thing i found is in device manager a similar to network adapter something called JUNGO was there wat the hell is this anybody...

Jungo is probably your USB Driver for the Network.

Try uninstalling the Network Adapter (Ethernet) from the Device Manager.

Then, reinstall the Network Adapter's (Ethernet) Driver in the Computer by using your Motherboard CD or download it from the manufacturer's website.

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8169/8110 Family Gigabit

Repost data here.
ipconfig /all
Change DHCP range in modem to
192.168.1.2 to 198.168.1.10

Network LAN USB
Properties
Network settings
Properties
TCP/IP
properties
"obtain Ip address automatically" in both networks
Apply SAVE.
i

Do reset your modem and make dial up connection bcoz in that situation it is not require any kind of dns server ip.
2. check lan cabe is it straight and cross cable and. if check lan cable is working right or not.
3. Bascially staright cable is require for modem, may be some time cross cable will be work.
4. And check ethernet light indication .
5. And it is in PCI port and join in motherboard. If is in PCI port then change it PCI port and again not working lan then change lan card. And it is fix in mother board then use new one ethernet card. Then it will work

and again u r getting any issue then inform me.

Regards
Gaurav Shukla
(Bsnl Engineer)