Thread: Upload problem with BSNL Type-II Modem

I have changed from BSNL Broadband Type-I(HUAWEI SmartAX MT800) Modem to Type-II(UTSTARCOM WA3002-g1 Wireless ADSL Router) modem with wi-fi. As there was upload problem with Type-II modem, I checked the download and upload speed with a Speedometer availble online. The download speed was between 160 and 210 Kbps and the upload speed was 0 (zero!) Kbps with Type II Modem. But withmy Type-I modem, the download speed was almost same and the upload speed was between 46 Kbps and 64 Kbps. This I found by doing several tests with both the Type-I and Type-II modems. So it is confirmed that the problem is with the Type -II modem and not with my PC. With this 0 Kbps upload speed I am not able to send emails through Hotmail and Gmail and could not transact through internet banking. As usual, my complaint to BSNL, made 5 days back, has not yielded any result except few phone calls enquiring about the fault. Hence I am approaching this forum. Can anyone help me to resolve this problem. I would be glad if i get some direction on setting and configuring the Router.

I have the same issue with the type II modem - unable to use hotmail, gmail, yahoo and any online transactions. Have you (netzone) been able to do something about it??

I am also facing the same problem with the model UTSTARCOM WA3002-g1. If any one of you been able to resolve the issue please tell. Otherwise we have to change the modem immediately from BSNL.

I was previously using a modem of HUWAI model. It was working fine. Oneday i was not getting ADSL signal in the modem. The BSNL people have replaced me with this UTSTARCOM WA3002-g1 (after 3 weeks) saying that the modem has broken down. After getting this new modem also (after 3 weeks), the ADSL LED was not glowing. Then they resetted the server and now its working fine but only downloads and often getting error messages in yahoomail. Today only i noticed that the upload speed is 0.

I am giving the details below for the use of many members who have expressed similar problem through private message to me:


Open IE browser and type the address: 192.168.1.2

Open the page by giving username and password as: admin

Click InterfaceSetup

At the bottom of the page change the value 1500 as 1492
for : TCP MTU Option: TCP MTU(0:default) ..... bytes.

Press SAVE

Then, click Advanced Setup -> ADSL

Set the ADSL Mode : Auto-Sync Up

Press SAVE


Then, click Maintenance -> SysRestart

Set System Restart with: Current settings

Press RESTART

Close the web browser.

With the above configuration, I am not having upload problem.

Those of you having problem with the above Modem can try this configuration.

Thanks a lot the upload is working now. I will come back after checking the upload and download speed

Thanks again

Thanks for your queries guys , but my question is little irrelevant from the above so sorry for that.
Does the (UTSTARCOM WA3002-g1 Wireless ADSL Router) modem offered by BSNL Dataone has a USB port.

UTSTARCOM WA3002-g1 Wireless ADSL Router is not having USB port. But a similar model: UT-300R2U UG is having a usb port.
The disadvantage of WA3002-g1 i have seen is that the upload will not happen with this model by default setting. We need to change the settings as per reply from "rkalantri". Thanks to rkalantri, once again. After the settings change the modem is working very fine.

hi guys
thanks syedmoufoos for u'r fast reply.m8
if any body could tell the specifications of Type 4 modem provided by the bsnl dataone. I wl'd really appreciate that since the personels of bsnl here in my town are ..... as all know.
so any help would be appreciated
thanks

Thanks a lot for your posting rkalantri.

It worked for me too. Have been struggling to have this resolved for the couple of months for one of my relative..

hey i am using dlink glb502t router and i am having bsnl home 500 plan
i am getting bad download speed of 32 kbps but it is showing the bandwidth as 5.94mbps but i never got more than 50kbps its between 24-32kbps can u plzzz helpppp guys

can u guys plzz give me the info for the speed incrase for the steps that u had given above plzzz for glb 502t

SpeedGuide.net :: Your Guide to Broadband Check speed here.
Download TCP/IP optimiser and optimise.
Changing some values MTU etc can increase decrease upload

i am having siemens SL2_141 modem with bsnl dataone unlimited home plan

tested my speed with speedtest.net

download 518 kb/s

upload 0 kb/s

can someone pls guide me how to tweak/set my router to get appropriate upload speed. i am even unable to send mails / upload small images on any image hosting sites

Thanks to R.Kalantri.

I experienced difficulty in sending e.mails with attachments (especially the file sizes 100 kbs and above). There has been no guidance from BSNL Broadband.
Then I saw your thread and reset TCP/MTU to 1492. Now I could send mails with ease.

K.S.Kannan

Just a side note: The MTU size of 1492 is correct for most routers. However, in some routers you must set it as 1500. Please refer your router guide.

Originally Posted by just4kix

Just a side note: The MTU size of 1492 is correct for most routers. However, in some routers you must set it as 1500. Please refer your router guide.

hey buddy

i am unable to set MTU in my router (Siemens SL2_141) i think its a inbuilt setting in my router. can you pls tell me from where i can change MTU for my router.

Hi. guys... anyone tell me wat is difference b/w bsnl modams type 1 2 3 and 4. thanks

You can use software called 'TCPOptimizer' for changing MTU..

Originally Posted by Sumit020

You can use software called 'TCPOptimizer' for changing MTU..

you can change the mtu in adsl madem or router ......

Originally Posted by Pawan

Hi. guys... anyone tell me wat is difference b/w bsnl modams type 1 2 3 and 4. thanks

1,2,3,4 mean ADSL , router ,wireless or switch . which pronet pn-54 wadsl modem have .....

In wan setting ........

Originally Posted by amodmahto

you can change the mtu in adsl madem or router ......

But anuban1976 said he is unable to change MTU setting in router, that's why i posted that software name.

Originally Posted by anuban1976

hey buddy

i am unable to set MTU in my router (Siemens SL2_141) i think its a inbuilt setting in my router. can you pls tell me from where i can change MTU for my router.

Originally Posted by Sumit020

You can use software called 'TCPOptimizer' for changing MTU..

@Sumit020 how do you think the TCPOptimizer will change the router's MTU. TCPOptimizer works in operating system not in a router.
maybe you dont understand what anuban1976 want to say or you are a noob.
LOL

it would change the MTU in the pc , which is good enough..