Teracom: essbebe's compilation

Teracom - essbebe's

compilation
TERACOM Type2( T-2B-Gawv1.4U10Y-BI)

1.
Introduction:
This model ADSl wifi modem(as well as Adsl modem)is
being supplied by BSNL to its customers recently.
It appears mostly,this is based on Siemens C2110
(less WIFI), for which many links are available.

2.
Teracom Website
Teracom :: ADSL Modem
http://www.teracom.in/htmls/type1.rar patch 1
http://www.teracom.in/htmls/type2.rar patch 2
http://www.teracom.in/htmls/manual.rar basic/manual

3.
customer Care
Email & Phone No.
Customer Support Email : customercare@teracom.in

Customer Support Phone No.: 09718884242

Also on line form for technical assistance.
http://www.teracom.in/htmls/opinion/submit.asp
4.
IBF thread.
http://www.indiabroadband.net/bsnl-b...com-modem.html

5
Port forwarding.
If some options are not seen ( port forwarding etc )
try in "Always On" mode instead of "Dialer".mode.
Try these.
192.168.1.1/home.html
192.168.1.1/advance_menu.html
192.168.1.1/secur_menu.html


PS: I don't have this model.

members who access this post, may suggest improvements .
Or if still any problem with the modem/router.

115

Rep+. Why didn't you wait and submit this article for the contest?

@just4Kix
Thank you.
You had already given REP++ earlier.
As a senior here, I feel, I should not take part in the contest.
Any way I will try to post three or four articles for the contest.
Please consider shift/move @imrock's similar post for the contest.
http://www.indiabroadband.net/showth...731#post283731

That article was posted way too early. It will be difficult to justify.

But coming back to you. Sure. You can participate in the contest.

Sorry. did not notice the date of posting.

update :
USB driver from Installation cd: 23rd may 2010.
Uploaded by @Vinaysharma2K about 1200KB
RapidShare: 1-CLICK Web hosting - Easy Filehosting

update June 7th:
details (also USB drivers) available in Calcutta web site/s now

Teracom Type-II ADSL MODEM MENU type II
Teracom Type-I ADSL MODEM MENU type I

Update : 22nd June 2010:

both type I and Type II teracom models now included in Calcutta web site.
http://www.calcutta.bsnl.co.in/datao...all/mdm11.html type I
http://www.calcutta.bsnl.co.in/datao...all/mdm12.html type II

Why this Teracom's interface looks like that of C2110 ? Is this a re-badged one ?

USB Port function may not be available see email to BSNl below:

Sorry. forgot about it. sending email to denibchn@dataone.in to day.

Dear sirs,
In Calcutta telephones web site USB drivers have been provided for above model/s.
But Teracom ( In India ) when contacted says, it is for future use and BSNL present contract does not allow provision of USB port in their models.
Please clarify.
When Teracom is connected to system via USB port the hardware is not detected.
Thanking you
essbebe

@SledgeHammer

Why this Teracom's interface looks like that of C2110 ? Is this a re-badged one ?

See link WA3002_g4 below. Most modems/routers are based on one or two Firmware/s.
( minor changes/variations possible. For instance Ut300R2U new model supplied by bsnl does not have port triggering Virtual server options.)


REF:http://www.indiabroadband.net/bsnl-b...snl-modem.html

USB port facility not available at present. Info from BSNL.

Dear Sir
It is true that BSNL has not asked for USB port in Teracom modems and thatis the reason, they have not given the USB cable along with the modem.
However we shall update you, regarding the possibility of working of USB, if we get further information please

update. Details also available in bsnl web site
Teracom Type-II ADSL MODEM MULTIUSER CONFIGURATION

Picture of the modem shown on right .( picture by @neu01)
India Broadband Forum

how can i set teracom type 2 in pppoe mode.

@koolraj86
PPP/PPPoE mode ( userid/PW entered in Modem wan page)
check here:
Teracom Type-II ADSL MODEM MULTIUSER CONFIGURATION
Ignore Instruction No 2.
( If DHCP enabled in modem/router)
2.
Create new LAN Network.
START/All programs/Accessories/communications/
Network

New Information. Try auto update drivers in windows 7 O.S.
Conexant USB IAD LAN MODEM : USB. drivers selected
Reported by @forceindia.
http://www.indiabroadband.net/bsnl-b...tml#post305168

New link with screen shots.
https://docs.google.com/present/view...njx_14fhxf7xcf
credit goes to :@SiRu
http://hpsupport.wordpress.com/2010/...-0-adsl-modem/

Originally Posted by essbebe

New link with screen shots.
https://docs.google.com/present/view...njx_14fhxf7xcf
credit goes to :@SiRu
Setup Internet and Wireless Internet on BSNL AR800V v3.0 ADSL Modem Computer Help

well done essbebe.. those snappies will help people.

Wow thanks for the links..
Solved my problem

Rep+

For connecting teracom in "Bridged" mode.
PDF version 1.27 MB uploaded . (Credit to @drbuster )
http://www.megaupload.com/?d=VSL3YCFJ
see screen shots here.
source:
http://www.teracom.in/htmls/manual.rar

@drbuster REP++ to you. ( 18points from me !)

similar Model VMC AN1020-21
USER GUIDE:
http://downloads.vmcindia.com/vmcadsl/user_guide.rar
FW:
http://vmcindia.com/ADSL_Demo.html
Customer Care Email: customercare@vmcindia.com
Customer Care No:
Ph: 040-44603222 Ext: 112
Mob: 09885111326



Credit : contributed by @bsanant

For port forwarding Nokia siemens C2110 menu pages are similar.
PortForward.com - Port Forwarding Utorrent on the NokiaSiemens C2110

Hi all
Please help me to resolve the Wireless setup issue i have. I have new bsnl internet. I congifured LAN and it is working fine. next i tried to setup wireless, which is not working. Here is the configuration details i tried:
Select Profile: 802.11B/G
Wireless Network: Enable
Select Country: INI
Channel Selection: Auto
Select Channel: 2
Network Name (SSID): rev_bsnl
Hide SSID: No

Security Settings
Select Security Option: 64 Bit Encryption(Tried Wi-Fi Protected Access and Wi-Fi Protected Access2 too but not working)
WEP Authentication Mode: Open
Select Tx Key Index: 0
Select Key Method: Direct Key
Key: 123456ABCD
WEP Pass Phrase: (Blanks)
Select Encryption Protocol: Disabled
Select Authentication Method: Disabled
WPA Pass Phrase: Disabled
802.1x Identity String: Disabled
802.1x Rekey Timeout: Disabled
PMK Caching: Enabled

And Confirmed the above. When i open the Wireless network connection setup, i could see the network and click connect. It asks for the key and i give the HExadecimal key i gave in the security setup. it keeps trying and comes back as either 'Available' or 'Not connected' . Please help me

Thanks in advance

This may help

http://www.indiabroadband.net/bsnl-b...i-teracom.html

You need to change channel to 9 or 11 and check.

thank you Dilip.
Thanks for your posts. But problem was mine. I was so naive to have not looking at the 'wireless' switch on the laptop. my bad, now it is working fine. Thanks again

oh, nice .......

A picture of the modem/router.


http://img827.imageshack.us/img827/4945/teracom.jpg

10,800 post 10865.

how to change dns address in this router.....m trying to change the dns to open dns/google dns but the router is taking the preset bsnl dns..

how to change dns address in this router.

Change settings here. Recheck with ipconfig /all


Para two;
iN MODEM expand menu page containing dns server etc
(Advanced Options )
and please post screenshot.
Check anywhere BSNL DNS is entered
or Box selected
"Obtain DNS automatically"

@meetdilip
Please post page from AR800V3 for above.
@viper_in_blood
About posts going to moderation: I missed your previous thread.
now seen.

@ essbebe

No longer have AR800V. Now using WA3002G4.

one more blog site with screen shots:
News Signals: Teracom - Configure Internet Connection in BSNL Teracom Modem

PS: sorry missed the name of IBF member who referred this site.
will update if found.

12840H/11489P

UPDATE: Checked. Please ignore. Link Not available..
will update later.
Manual for C2110:
Check this link.
Hotfile.com: One click file hosting

UPDATE : 28th July 2011.
Model no. S4u+1.0v by syrma technology
"where can I find USB drivers for this modem?"
Conexant USB IAD LAN MODEM
foribb: USB DRIVER, MANUAL, DIALER FOR ZTE ZXDSL831AII MODEM

@Samuel
thank u essbebe, Conexant USB IAD LAN MODEM link that u posted worked for my modem usb, thanks a lot.....

http://www.indiabroadband.net/bsnl-b...tml#post336301

Not Found

The requested URL /htmls/type2.rar was not found on this server.

this is what is happening when i click on your link
\for teracom type 2

@free

Not Found
The requested URL /htmls/type2.rar was not found on this server.
this is what is happening when i click on your link
\for teracom type 2

wait checking up . Yes All links same 404 error.
Company might have closed down the server.

In the meantime, if you tells the specific problem you face with the company's Modem/router AR800 V3
will try to help you!!!!
PS: presume about Portforwarding . replied in another thread.

Originally Posted by essbebe

@free

wait checking up . Yes All links same 404 error.
Company might have closed down the server.

In the meantime, if you tells the specific problem you face with the company's Modem/router AR800 V3
will try to help you!!!!
PS: presume about Portforwarding . replied in another thread.

yes its about the same problem . my modem is type 2 model teracom t2-b-gawv1.4u10y-bi. my downloads were perfectly fine. but after reinstalling windows my speeds are no were near what i use to get. how to enable Upnp in type 2 model teracom t2-b-gawv1.4u10y-bi.? how to port forward after logging into virtual server? my downloads are slow, utorrent says port not open but you can still download. downloads in chrome and modzilla are slow. otherwise surfing is ok.

@ free,

Simply switch to bridge mode and see if you are getting proper speeds. Hope you did UPnP and NAT PMP settings as mentioned in other thread. If it is a port forward problem, it will not happen in bridge mode. I am not suggesting you to move permanently but switch and check.

Originally Posted by meetdilip

@ free,

Simply switch to bridge mode and see if you are getting proper speeds. Hope you did UPnP and NAT PMP settings as mentioned in other thread. If it is a port forward problem, it will not happen in bridge mode. I am not suggesting you to move permanently but switch and check.

ok will switch to bridge and test. but firstly can you link me to the thread about NAT Pmp and Upnp. i dont know how to enable it in my virtual server. got a link but it was in siemens modem, and its not similar.

Nokia Siemens C 2110 and Teracom modems have similar interface.

Use this

http://www.indiabroadband.net/bsnl-b...tml#post336501

will work even without port forwarding. Check modem settings, if possible enable UPnP too.

Originally Posted by meetdilip

Nokia Siemens C 2110 and Teracom modems have similar interface.

Use this

link

will work even without port forwarding. Check modem settings, if possible enable UPnP too.

ok i somehow check NAT and its enabled, but i dont know where Upnp is .. both Nat and UpnP in utorrent are enabled. modem settings?

http://www.pcwintech.com/port_test.php?
http://www.pcwintech.com/simple-port-tester
http://www.simpleportforwarding.com/

similar page for ref:
https://lh5.googleusercontent.com/-0...Untitled-1.jpg

Ya, Check for UPnP in modem. Did you try bridge mode ?

Originally Posted by meetdilip

Ya, Check for UPnP in modem. Did you try bridge mode ?

yesterday while we were in forum, my net net suddenly went off, guess what happen? my modem board got burnt(it was only 2 weeks old). got it replaced today though teracom modems still looks and feels cheap. i havent tried bridge mode. cause i coudnt find the option to switch bridge and pppooe. have you found out how to enable Upnp?

I don't have that modem any more. Please check with essbebe. Let us hope he has a screen shot in his collection. Or you can simply browse the modem pages, it is not hard to find.

BSNL has stopped issuing modems. Not sure it is good or bad, but we used to get WiFi modems on Rs. 80 per month rent.

To switch between bridge and PPPoE, simply try to find a page with VPI/VCI with 0/35 entry. Edit it and you will find the option. I think the page name is " Internet connection ". Check the LHS menu of modem.

Hi All,

I hv gone thru' many articles provided in this site , especially essbebe's but I couldn't resolve the Wifi issue for my new modem Teracom -Type 2 [T2-B-Gawv1.4U10Y-BI]. I am able to connect thru a Lan (ethernet port) but it has become impossible to connect it thru Wireless. I was able to do it with my earlier wifi modem (W3002), which gave up a few days back.

Please let me know wats gng wrong with my wireless settings.
I get to see the Wireless connection icon getting displayed as Connected but when it comes to browsing the net, no connection is avlbl.

I am attaching below my settings.
Note: I tried changing "Dying Gasp" to 'disable' in ADSL Basic Attributes, but no luck.

Thanks in advance

Will be nice if you can give the screen shots itself as attachment.

1. What error does it give when you try to connect to your WiFi ?

2. How many wireless device do you have ? Is it a laptop or a mobile phone ? Mention OS in use. Does any other device successfully connect to your WiFi ?

3. This may help

Teracom Type-II ADSL MODEM MULTIUSER CONFIGURATION

http://www.indiabroadband.net/broadb...tml#post325614

For both "Bridged" and "PPPoE" connection
For BSNL VPI VCI is 0 and 35.

Presume you use PPPoE mode.

Hi essbebe,

I have tried to change the IP VPI/VCI for "bridge" to 0-38 and the PPPoE to 0-35(screenshot attached). This time, it even fails to connect thru Ethernet cord.

With my earlier configuration[IP VPI/VCI for "bridge" to 0-35 and the PPPoE to 0-38], I see the Wireless icon display "Limited or No connectivity" but the internet works with LAN.[Find attached my wireless settings.]
I use Lenovo Laptop.The wifi used to work for my earlier BSNL wifi model (W3002).As the modem is no more functioning I requested for a new modem from BSNL.This model is Teracom, for which my earlier Backup settings are not compatible(earlier it stored as .conf now it accepts only .icf).

Your help in this regard is much appreciated!

With my earlier configuration[IP VPI/VCI for "bridge" to 0-35 and the PPPoE to 0-38], I see the Wireless icon display "Limited or No connectivity" but the internet works with LAN

Delete all lines EXCEPT 0 35 Then EDIT
Or forget 0-38 with vpi/vci 0/38

For a single ISP say BSNL you can have only ONE mode of connection.
(in dialer mode exception IPTV 0 and 33 )

Follow the screen shots given here. for a PPPoE connection.
https://docs.google.com/present/view...njx_14fhxf7xcf

IF Still no wifi ( Presume you remove the lanrj45 cable when using WIFI from laptop )
Post ipconfig /all data
( without Tunnel data for Both Ethernet card and wireless Lan card.

Hi Essbebe,
Thanks for the quick reply. I understand what you are saying. I have now maintained only PPPoE with 0 - 35 VPI/VCI. But it is neither connecting thru Wireless Nor thru Ethernet. I have attached my settings for configuration and wireless below.
For connecting back to internet thru cable, i have restored the "bridge" connection temporarily.

Here is my IPCONFIG information(with bridge mode):
================================================== ==
Ethernet adapter Wireless Network Connection 2:

Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : Intel(R) WiFi Link 5100 AGN
Physical Address. . . . . . . . . : 00-22-FA-E9-E0-FC

Ethernet adapter Local Area Connection:

Physical Address. . . . . . . . . : 00-22-68-0E-DE-A9
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.10
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.1

PPP adapter BSNL:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface
Physical Address. . . . . . . . . : 00-53-45-00-00-00
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 59.93.51.94
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . : 59.93.51.94
DNS Servers . . . . . . . . . . . : 218.248.240.181
218.248.240.135
NetBIOS over Tcpip. . . . . . . . : Disabled
===============================================

do you see the SSID ( yours or any other ) in network settings?

Now you are in "Bridged" Mode
again change to PPPoE. hope you enter id/pw correctly.
after all steps go to this step and REBOOT>


Feedback. if still problem
ipconfig /all in PPPoE mode. ( LAN mode only )

For info:
vide Post No 1.
Links removed/notavailable at the company's web site.
only specifications page. with different model number/s.
http://www.teracom.in/images/stories..._with_wifi.PDF

Para two:.
An user manual uploaded here. 1945KB PDF file.
Teracom T2 Gawv1.4U10Y.BI.pdf - 4shared.com - document sharing - download

Source: deleted as a FW file link contains virus as reported by MSE.

P130159H17214