Thread: Unable to Access 192.168.1.1

I am Unable to access 192.168.1.1 .
Im using windows 7 professional. is there any settings i need to change to make it work ? because it worked for me , when i was using winXP .

Plz Plz help me... i need to config wifi for the modem..
My Modem is WA3002G4 .

Are you sure that it is working in XP ? Why do you want to access modem page ?

Check your external IP and type in your address bar and check.

If nothing works, reset the modem. There will be a small hole in the back of the modem. While power is ON, insert a refill and hold it pressed for 30 seconds. It will reset to factory settings. Be warned, don't try if you do not know how to configure your modem back to working condition.

im pretty sure it worked for me in Xp. i want to config it to change the wifi settings so that i can use internet on my mobile.

and i enterd my external Ip and it worked. but not the modem Ip .

i got a CD wit my modem. so will tat set things right after i reset the modem??

can u tell me how to gain access to 192.168.1.1.. that would be enough !

Originally Posted by creed09

im pretty sure it worked for me in Xp. i want to config it to change the wifi settings so that i can use internet on my mobile.

and i enterd my external Ip and it worked. but not the modem Ip .

i got a CD wit my modem. so will tat set things right after i reset the modem??

It seems that you are not familiar with modem configuration. Don't try it then. CD won't help for modem installation. Please post your modem - model and make.

UTstarcom
WA3002G4 .


OS -win7

Originally Posted by creed09

can u tell me how to gain access to 192.168.1.1.. that would be enough !

You should be able to access the modem if you type 192.168.1.1 in the browser. If it is not working, just type external IP in the address bar instead of 192.168.1.1 and check.

Another method is to reset the modem using the method I mentioned above. But it will reset your modem to factory setting. If given model no, I can check whether there is any tutorial for configuring your modem so that you can reset it without any trouble.

http://www.indiabroadband.net/broadb...tml#post284804 (192.168.1.1 No access !)

Originally Posted by creed09

UTstarcom
WA3002G4 .


OS -win7

first of all make sure u have set a ip address and default gateway in LAN settings!!and then check your external ip here.

enter the ip u get from the site in your address bar!!

Feedback

Originally Posted by meetdilip

You should be able to access the modem if you type 192.168.1.1 in the browser. If it is not working, just type external IP in the address bar instead of 192.168.1.1 and check.

Another method is to reset the modem using the method I mentioned above. But it will reset your modem to factory setting. If given model no, I can check whether there is any tutorial for configuring your modem so that you can reset it without any trouble.

@meetdilip you are right the member should mention the model/make as without model number the further suggestions may not be carried forward

As said above by meetdilip that try resetting the router,as it resets the modem's ip address but be aware that it would restore the modem to the factory settings!!

I have posted the model and model no.

and my external Ip . when i try to connect it.. it says unable to connect.

Originally Posted by creed09

I have posted the model and model no.

and my external Ip . when i try to connect it.. it says unable to connect.

u tried post #8???

And if nothing works just reset your modem so that your modem gets an ip address!

Start > Run > cmd > ipconfig/all, post the screen shot.

Change values according to this thread

http://www.indiabroadband.net/broadb...nectivity.html (How to repair - Limited or No connectivity)

here is the screen shot

Keep the modem ON while taking the screen shot. As mentioned, change the values according to the thread.

one doubt .
in the ip adress feild.
1) should i use the ip shown in as my external IP ?
2) or the same value itself as shown in the thread ?

Originally Posted by creed09

one doubt .
in the ip adress feild.
1) should i use the ip shown in as my external IP ?
2) or the same value itself as shown in the thread ?

u have to fuill what he filled in the thread i.e. 192.168.1.2

Originally Posted by creed09

one doubt .
in the ip adress feild.
1) should i use the ip shown in as my external IP ?
2) or the same value itself as shown in the thread ?

Give your internal IP. ie, 192.168.1.25