Thread: Wireless Connection Problem - Nokia Siemens Residential Router 1600

I got my Bsnl BB connection last week...n have Nokia Siemens Residential Router 1600...

internet is working flawlessly on pc via rj45 cable but when i connect my laptop via wireless it says no internet access...

actually when bsnl's engineer came they configured the modem only for my pc ...as my laptop was not at home...

I am running windows 7 on both the pc n laptop..

hope u can solve my problem..

i have attached screens of my modem config n ip config of my wireless adapter...

thanks in advance...

can u connect to wifi???

If so then if it says "No Internet Access" then just make a new connection and connect to it!For further details plz reply!!

seems Ok.
Have you enabled DHCP ( see in lan Page )
Also TCP/IP properties Obtain IP address automatically.Also disable IPV6 box.
You can try in PPP/PPPoE "Always On Mode "
and enter userId/PW in modem wan page.


Click Tric: How to configure UTStarcom wireless router WA3002G4 | WLAN security with MAC address filtering
Recheck settings with this link (given also in WA3002_g4 link below.) Minor changes in menu pages possible
If still problem
Post only ipconfig /all
data for one laptop. ONLY wireless lan required.
Tunnels etc not needed.

Originally Posted by imrock

can u connect to wifi???

If so then if it says "No Internet Access" then just make a new connection and connect to it!For further details plz reply!!

well i can connect to wifi...i can also ping router n my pc...

created a new connection manually...but still no internet access...

Originally Posted by essbebe

seems Ok.
Have you enabled DHCP ( see in lan Page )
Also TCP/IP properties Obtain IP address automatically.Also disable IPV6 box.
You can try in PPP/PPPoE "Always On Mode "
and enter userId/PW in modem wan page.

Recheck settings with this link (given also in WA3002_g4 link below.) Minor changes in menu pages possible
If still problem
Post only ipconfig /all
data for one laptop. ONLY wireless lan required.
Tunnels etc not needed.

DHCP is enabled in my modem...

i have already disabled ipv6...

which username password i'm required to give in pppoe mode....my portal id and password or what?

i have posted ipconfig of wireless in attachments..

guys plz hav a look at my modem config posted in attachments n reply...

In the modem, you need to give your User ID not portal ID.

Change the channel from auto to " manual " and check. Disable MAC filter and connect directly. Are you sure that the address entered in the MAC filter is of your destination computer ?

Originally Posted by meetdilip

In the modem, you need to give your User ID not portal ID.

Change the channel from auto to " manual " and check. Disable MAC filter and connect directly. Are you sure that the address entered in the MAC filter is of your destination computer ?

which user id d 1 i use to connect via cable??

User ID and portal ID are different. You need to use User ID. If you do not have it, call the exchange and ask them.

To connect to Internet in Lan mode
use USERID and PW which you have been using when using "Dialer " ["bridged" Mode. box
in WAN page ]

well thanks all of you...i'm now connected...reps for u all..

but now i don't hav to dial my connection on pc...it is automatically connected...why this??

It is still dialling. But it takes place in the modem. Happy that you can connect.

Originally Posted by akrvd

well i can connect to wifi...i can also ping router n my pc...

created a new connection manually...but still no internet access...

It says no Internet Access but can u browse net??i mean when i used Bridge mode i got No internet Access but i could browse web!

Can you connent to the new made connection??

And try to switch to PPPoE mode!!No need for making connections!!

everything was goin well...but now net gets diconnected automatically...or link fails...every 10-15 mins...wat to do now?

Originally Posted by akrvd

everything was goin well...but now net gets diconnected automatically...or link fails...every 10-15 mins...wat to do now?

1. Check your splitter. Bypass the splitter and connect directly to the modem and check. If it is a splitter problem, the issue will be solved.

2. Make sure that all connections come after splitter. Check this diagram



3. Post your SNR and attenuation values. If bad, get your line checked by line man.

Originally Posted by akrvd

everything was goin well...but now net gets diconnected automatically...or link fails...every 10-15 mins...wat to do now?

Thats your line problem!!!Check out your splitter for the right connections.Also post your SNR Values and Line Attenuation.they should be according to this post:
http://www.indiabroadband.net/showthread.php?p=38847
if they are bad then get your line checked by lineman.

Also make sure u follow the diagram posted by Dilip!

my splitter is just as dilip posted...

snr and attenuation values

Downstream Upstream

SNR Margin (dB) 30.2 28.1
Attenuation (dB) 16.0 3.3

@akrvd


Open router's settings pages and select Management and Backup present settings to say C:/My documents/ 1600 working

1.Now you are on "Always On" mode
( userID and PW entered in WAn page of modem )
2
Does
the dialer screen appear and attempts to connect? ( unlikely)
Prefer delete Dialer mode in network settings page.
3.
If you have used BSNL DNS change it to
open dns 208.67.220.220 and google 8.8.8.8
Prefer enter it in modem as well as in Network settings/tcp/ip page.

4.
Change mod mode to GDMT.
For some screenshots see WA3002-g4 link below.
Feedback.

thanks essebe...will try these...n inform asap...

can anyone tell me..what is the total upload volume n total download volume...found after logging in to usage page...i'm new so i need ur help...

but in my modem's page i can't find any backup option..

Please click my signature link/s given below.
In usage page some details/applications are mentioned.
prefer check locally your usage, as BSNL
website sometimes may not be available.

Recommend this application.
Bandwidth monitor, bandwidth speed test, bandwidth and traffic monitoring tool for Windows

thnks essebe for quick reply...app seems good will use it...

You can select Blue Box for Unmetered periods