Thread: Problem in desktop lan connecting to Beetel 450 tc1 for BSNL

Hi All & Essbebe,

Actually i have bought a new Beetel 450 tc1 to be used with my BSNL broadband connection,however i am encountering problems connecting it to the desktop lan (wired connection), i could connect m laptop to this modem/router in wifi state aswell as wired state but am not able to do this for my desktop.

Earlier i was using UTStarcom's device with model no: UT 300R2U, with this device it was perfectly working fine and i did not encounter any trouble configuring or connecting at all.

My settings as of now are Obtain ip address automatically and obtain DNS server address automatically.

I didn't have to configure any settings for laptop to be connected in wifi or wiredmode except for the basis pppoe settings under 0/35.

The ethernt card keeps on blinking at interval of time{for fraction of time not the regular blinking as in handshaking mode} and the light glows on back panel of desktop and also on the router/modem lan port, a message " NETWORK CABLE UNPLUGGED KEEPS ON DISPLAYING IN STATUS BAR AND IT KEEPS REFRESHING" i mean its contineously trying to access or acquire network address i think.

Tried referring earlier threads but didn' find something specific hence posted a new thread.

Any advise on troubleshooting this problem at earliest would be highly appreciated.

Thanks and Best regards,
sacspot.

You could have avoided duplicate post on same subject same day
http://www.indiabroadband.net/bsnl-b...1-desktop.html (unable to configure beetel 450tc1 for desktop)