Thread: Help Needed - Nokia Siemens Networks Residential Router 1600

I just configured my Nokia Siemens Networks Residential Router 1600 to strengthen my WIFI network security & opted for WPA2 - PSK alongwith AES encryption.

There after I couldn't connect to my WIFI network & the following message is displayed:


The settings saved on this computer for the network do not match the requirements of the network.

Plz Help.

1.
Check WIFI settings in this link
WA3002_g4 given below. ( menu pages should be same )

2.
make a new WLAN network and enter new data.
3.
Does the name of the WIFI network as given in Router appear in
" show Available Wireless Networks" option ?
( in context menu of WLAN icon )

Yes the name is showing

Originally Posted by essbebe

1.
2.
make a new WLAN network and enter new data.

How do i, can't connect to the router

In your computer
START All programs
Accessories
communication
Wireless network Wizard.
follow instructions.
or
if possible in old WLAN
( start Show all connection Wlan)
check the security key you have stored. )
Confirm modem menu pages are same wa3002_G4 AND :"NSN1600".

Originally Posted by essbebe

In your computer
START All programs
Accessories
communication
Wireless network Wizard.
follow instructions.
or
if possible in old WLAN
( start Show all connection Wlan)
check the security key you have stored. )
Confirm modem menu pages are same wa3002_G4 AND :"NSN1600".

I have Windows 7 on my laptop.

The pane on the left hand side is a little different, has two main headings

ADSL & WIRELESS

In the Sub category security under the main category WIRELESS, the options to setup up network authentication are given

There is no reset button on the router

Why you want the reset button access / It is very much available !

Better plan will be to try to connect to WIFi network Unsecured.
and restore WIFI function.
feedback.

2. Start RUn type cmd Ok
New window
type ipconfig /all
copy paste data ONLY for wlan network.
( No tunnel data required)
REF:http://windows.microsoft.com/en-us/w...reless-network

[QUOTE=essbebe;290522]
2. Start RUn type cmd Ok
New window
type ipconfig /all
copy paste data ONLY for wlan network.
QUOTE]

Wireless LAN adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) WiFi Link 5100 AGN
Physical Address. . . . . . . . . : 00-24-D6-49-9E-18
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Pls Can u tell me where to find the reset button on my router?

(*wireless)Media State . . . . . . . . . . . : Media disconnected
confirm you get connected to internet in LAn mode.

Post Ipconfig /all data for lan connection.

para two:
http://forevergeeks.com/how-to-setup...e-on-windows-7

Open network settings. Select Wlan
properties
Wlan network settings page opens
Uncheck IPV6 box
Select TCP/IP

properties
select Obtain Ip address automatically.
Apply Save.
now try.

I accidentaly had my laptop restarted & now it connected to the lan & I can now open the DSL Router page.

Plz can you guide me on configuring secure WIFI Network

Originally Posted by GauravOjha

I accidentaly had my laptop restarted & now it connected to the lan & I can now open the DSL Router page.

Plz can you guide me on configuring secure WIFI Network

In the WAN page, just below " enable Wireless ", you will find an option to choose the encryption and set a pass key. Try it.

Open Management and backup current settings to say
C:/My Documents/LAN working
Then try to select Wireless settings as given here.
http://www.chennai.bsnl.co.in/BBS/WA...eless_security

Thanks guys I've set up my secured WIFI network with your valuable suggestions & help.