Thread: The phone line is busy

'internet light' is always on..not blinking....wireless not working...

Sometimes i get the connection.........i can connect through lan..

Pls help....

Dsl ok..

Wlan ok...

Prblm is 'internet light'..when i on the modem...

Originally Posted by mahesh_gt

'internet light' is always on..not blinking....wireless not working...

Sometimes i get the connection.........i can connect through lan..

Pls help....

Dsl ok..

Wlan ok...

Prblm is 'internet light'..when i on the modem...

I had the same problem that INET light was not glowing;This is because your login details are not being accepted by the sever

TO solve this: Visit your telephone exchange and personally register your complaint describing that INET light is not glowing
(calling at 1504 does not help)
If they do not clear the problem go there again and repeat the process
Then your problem should be resolved

PM me for any help

error 676.the phone line is busy ...wireles not working..

Originally Posted by mahesh_gt

'internet light' is always on..not blinking....wireless not working...

Sometimes i get the connection.........i can connect through lan..

Pls help....

Dsl ok..

Wlan ok...

Prblm is 'internet light'..when i on the modem...

1. Please mention modem - model and make

I think this is an exchange issue. Ask them to change the port and try.

Things you can do yourself:

a) Check the wires. Sometimes we overlook the most obvious. A faulty wire or connector can be an issue.
b) Check the splitter. It may be malfunctioning. It should be at the first entry point of the telephone line in the house.
c) Check SNR Margin and Line Attenuation.
d) Check outside line - lookout for joints, twists, corrorded contacts, etc.

But most likely you have a problem with the outside line and port at the exchange. See this thread: My interactions with BSNL

i guess the problem is with the splitter.... its not separating the DSL line and telephone line.

I had changed my password of 192.168.1.1 , I am now unable to enter modem(192.168.1.1). As there is no physical reset switch , I am not able to reset modem.sometimes internet connection is ok. , I shall be in deep troble. If any other procedure exists to reset modem, kindly elaboarate.

i'm using wifi and lan....

lights in modem
dsl glowing when connect
WLAN GLOWING....
INTERNET {INET} Glowing and blinking when i connect..when i dial the connection ..my lap shows error 676 :the phone line is busy....

i checked splitter and other connection there is no prblm...

Reset switch is at the bottom of the unit near right leg probably.
You have not mentioned modem/router/model/make/number.
( Check from link/s below.
wait...
see this
http://www.indiabroadband.net/attach...tswitchrt6.jpg

Originally Posted by mahesh_gt

I had changed my password of 192.168.1.1 , I am now unable to enter modem(192.168.1.1). As there is no physical reset switch , I am not able to reset modem.sometimes internet connection is ok. , I shall be in deep troble. If any other procedure exists to reset modem, kindly elaboarate.

i'm using wifi and lan....

lights in modem
dsl glowing when connect
WLAN GLOWING....
INTERNET {INET} Glowing and blinking when i connect..when i dial the connection ..my lap shows error 676 :the phone line is busy....

i checked splitter and other connection there is no prblm...

gtmmhsh@gmail.com..reply or here..help..plssssss

Which mode do you use ? Bridge or PPPoE ? PPPoE mean ID and password stored in the modem and you can connect bu simply switching ON the modem.

Every modem has a reset switch. There will be a small hole in the bottom of the modem. Use a refill and hold it for say 30 seconds when modem is powered ON.

Originally Posted by meetdilip

Which mode do you use ? Bridge or PPPoE ? PPPoE mean ID and password stored in the modem and you can connect bu simply switching ON the modem.

Every modem has a reset switch. There will be a small hole in the bottom of the modem. Use a refill and hold it for say 30 seconds when modem is powered ON.

PPPoE,,but i can't connect through this type....sometimes work correctly.....now automatically connected....through wifi....

Originally Posted by mahesh_gt

PPPoE,,but i can't connect through this type....sometimes work correctly.....now automatically connected....through wifi....

ppoe...modem UTSTARCOM WA3002G4

I think that there is a problem with your line or port. Please make a complaint at the exchange.

modem UTSTARCOM WA3002G4"Always On"PPP/PPPoE
@mahesh_gt
Copy/Paste these data here ( No edit )
if Using vista /windows 7 only LAN WLAN setttings needed.
( tunnel data not needed)
START RUN type cmd
OK
New window
type ipconfig /all

2. If possible screen shot of STATISTICS ADSl data page from modem.
or
post data
Mod mode selected / SNR ATTn line Rate RATE both Downstream and upstream.