Thread: Bsnl 500c plan

Hi i am using bsnl 500c plan with speed up to 2mbps or 256KBps but i am getting max speed of 192 to 200KBps wile downloading.previously my speed is 1.6 mbps and after setting microsoft reserve bandwidth from 20% to 0% my speed increased to 1.8mbps and this was noticed by me on DUMETER.But actually it is not more than 200KBps(1KBps=8kbps so 256KBps=2mbps) so my speed is still 200KBps i.e. 1.6mbps.
so what about you guys?
did u getting similar speed or more?
How can i get speed up to 230 to 250KBps is there any way or trick?
Thanks!

hi


what is ur SNR Mergin, Attenuation & Rate?

Not everybody is lucky to get the promised speed. Lot of users have reported the same speed.

Please try

http://www.indiabroadband.net/broadb...onnection.html (How to: get max. speed of a connection)

Unfortunately, this is the case with at least 80% of the users. Very rarely anyone gets speeds of 2 mbps. I used to be on the Home 500C+ plan and I used to get 1.7 mbps on an average.




------------------------------------------------

Since then, and after the upgrade of the speed on UL750+, I have moved to the UL750+ plan and I am quite happy.

Try downloading a file from microsoft with IDM....That will be your correct speed.....

@ Just4kix

Welcome to UL 750 club. Me too changed back to UL 750. After the speed upgrade, it is one of the hot favourite among users.

@ J4k Congrats for shifting to an UL plan.

And hey members do u have any clues about this. I am not getting 256kbps upload as promised. Faceing a problem like j4k. Any Clues?


Complete UL speed without any FUP, But Sad Upload.

Originally Posted by tech123

@ J4k Congrats for shifting to an UL plan.

And hey members do u have any clues about this. I am not getting 256kbps upload as promised. Faceing a problem like j4k. Any Clues?


Complete UL speed without any FUP, But Sad Upload.

Thanks, meetdilip and tech123.

I am not facing problems really.

[LEFT][LEFT][CENTER][CENTER][LEFT][RIGHT][RIGHT][INDENT][INDENT][INDENT][INDENT][INDENT]

Originally Posted by abhishe11sharma

hi


what is ur SNR Mergin, Attenuation & Rate?

Thanks for yuor reply.

Statistics -- ADSL

Mode: ADSL2+
Line Coding: Trellis On
Status: No Defect
Link Power State: L0

Downstream Upstream
SNR Margin (dB): 33.9 23.5
Attenuation (dB): 11.5 3.0
Output Power (dBm): 4.4 23.5
Attainable Rate (Kbps): 21372 588
Rate (Kbps): 2046 509
MSGc (number of bytes in overhead channel message): 61 81
B (number of bytes in Mux Data Frame): 62 13
M (number of Mux Data Frames in FEC Data Frame): 1 16
T (Mux Data Frames over sync bytes): 1 1
R (number of check bytes in FEC Data Frame): 16 16
S (ratio of FEC over PMD Data Frame length): 0.9693 13.0612
L (number of bits in PMD Data Frame): 652 147
D (interleaver depth): 64 4
Delay (msec): 15 13

Super Frames: 239379 228603
Super Frame Errors: 0 35
RS Words: 16038408 1189197
RS Correctable Errors: 0 63
RS Uncorrectable Errors: 0 N/A

HEC Errors: 0 84
OCD Errors: 0 0
LCD Errors: 0 0
Total Cells: 18762202 5391500
Data Cells: 162338 49828
Bit Errors: 0 0

Total ES: 0 14
Total SES: 0 0
Total UAS: 17 7254



ADSL BER Test - Result

The ADSL BER test completed successfully.

Test Time (sec): 20
Total Transferred Bits: 0x0000000002357D00
Total Error Bits: 0x0000000000000000
Error Ratio: 0.00e+00

SNR Margin (dB): 33.9 23.5
Attenuation (dB): 11.5 3.0

its very good.
but your rate is low my rate is 2048 & 512 and i get 214-220.
call customer care - 1504

i hope your problem solve.

if solve your problem plz tell me.

ok
good day

Thanks for reply and suggestion!