India Broadband Forum


how to configure BSNL Type IV (MT841) modem for wireless setup with Netgear WG511T

This is a discussion on how to configure BSNL Type IV (MT841) modem for wireless setup with Netgear WG511T within the BSNL broadband forums, part of the Broadband Internet Service Providers category; Hi.. everybody... I am trying to configure the wireless setup with Netgear WG511T and MT841 Modem. But I am.... Trying ...

Go Back   India Broadband Forum > Indian Broadband Forums > Broadband Internet Service Providers > BSNL broadband

India Broadband Forum


BSNL broadband Bsnl broadband internet connection and modems, routers and other bsnl dataone related issues can be discussed here.

                      

Reply

 

LinkBack Thread Tools Display Modes
Old 02-16-07, 09:20 PM   #1
Junior Member
 
Join Date: Feb 2007
Posts: 1
Rep Power: 0
hensum is on a distinguished road
Default how to configure BSNL Type IV (MT841) modem for wireless setup with Netgear WG511T

Hi.. everybody...

I am trying to configure the wireless setup with Netgear WG511T and MT841 Modem. But I am.... Trying Trying Again At Last Fail...
Can anybody help me as soon as possible.



With Regards,
Hensum
hensum is offline   Reply With Quote
Old 11-15-09, 11:31 AM   #2
Junior Member
 
Join Date: Nov 2009
Posts: 2
Rep Power: 0
vivekanantha7 is on a distinguished road
Smile

Hi Buddy,
I have the same problem. I brought the same WG511v2 PCMCIA Wi-Fi Adapter yesterday. Brought and tried every other possibilities, But Dont know how to make it work. Need Help guys...




---------------------------------------
Visit my Blog: h##p://edode.blogspot.com
---------------------------------------
vivekanantha7 is offline   Reply With Quote
Old 11-15-09, 12:18 PM   #3
Platinum Member
 
Join Date: Aug 2007
Location: Chennai
Posts: 4,232
Rep Power: 12
essbebe is a glorious beacon of lightessbebe is a glorious beacon of lightessbebe is a glorious beacon of lightessbebe is a glorious beacon of lightessbebe is a glorious beacon of lightessbebe is a glorious beacon of light
Default

1.You have the Netgear Wireless Lan adapter card
inserted in your laptop.
If you had done the settings correctly,
click the Wifi Icon and choose
View Available Wireless Networks "
If any secured or unsecured WIF network appear
Your settings in laptop and Netgear WLAN card are OK.
Power LED "ON" and WIFI connection LED will blink
if there is traffic. I have the same set up.
MyISP/ modem110BX1 / OFF !
Wifi router NetgearWGR614v6 is standby!
working on a friend's U/L unsecured WIFI network !

2.
Modem Mt841 needs additional PCMCIA wireless router
to be inserted in the modem itself. Very difficult to get.
Did you get it ? Confirm .
You may have to buy the wifi router mentioned above.
or purchase/exchange a new "3 in one" Type II or Type B
modem from BSNL for Rs 1600/+ Taxes
Rental Rs 80/P.M
Ref :
SmartAX MT-841 ADSL MODEM (Type-IV) MENU
CONFIGURATION

EXTRACT
Quote:
TYPE-IV

Step-11: On the left hand side, click on WLAN under Basic.

Step-12: On the right hand side, in the SSID Text box, delete MT841 and type an ID (This can be any name - type the name of the customer or the organisation - This is the ID with which, the customer's Wireless Network is identified)

Click on WPA-PSK Radio Button against WEP Method.

Type a password (with minimum 8 characters) in the WPA-PSK Key Text Box. (This is the password [Network key] with which, the Customer can enter into the Network identified by the SSID field.) Scroll down and click on Apply Button.

Step-13: On the left hand side, click on the + mark by the side of Advanced and the menu will expand.

Step-14: Click on ADSL.

Step-15: On the right hand side, click on the drop down list against ADSL Modulation and select Multimode and Click on Apply Button.

Step-16: On the left hand side, Click on the - sign by the side of Advanced. The menu will collapse.

Step-17: On the left hand side, down below, click on the Save All button.

Step-18: "Save and Reboot" - message box will appear. Click on OK.

Device is restarting...

Please wait about 2 minutes

screen will appear.



After 2 minutes when the Service Information screen appears, Close the internet explorer, allow the lamps to settle. Now in the configured MT841 modem, the link lamp will glow in amber. You have successfully configured MT841 type IV Wireless modem.



Having configured the modem, go to internet protocol (TCP/IP) properties again and take off the IP Address assigned by selecting Obtain IP address automatically radio button.
essbebe is offline   Reply With Quote
Old 11-15-09, 01:56 PM   #4
Junior Member
 
Join Date: Nov 2009
Posts: 2
Rep Power: 0
vivekanantha7 is on a distinguished road
Smile

Thanks for the suggestion but the cases you have mentioned is not my problem. I was not provided with WLAN PCMCIA Adapter of Huawei MT841. So as an alternative i tried with NETGEAR WG511v2 PCMCIA Adapter. This is my problem now. When i insert the WLAN Card and Turn the modem ON, I do not find any signal in WLAN Indicator. So help me out... Thanks again..
vivekanantha7 is offline   Reply With Quote
Old 11-15-09, 04:01 PM   #5
Platinum Member
 
Join Date: Aug 2007
Location: Chennai
Posts: 4,232
Rep Power: 12
essbebe is a glorious beacon of lightessbebe is a glorious beacon of lightessbebe is a glorious beacon of lightessbebe is a glorious beacon of lightessbebe is a glorious beacon of lightessbebe is a glorious beacon of light
Default

PROBLEM
Quote:
Huawei MT841. So as an alternative i tried with NETGEAR WG511v2 PCMCIA Adapter.
1.
NETGEAR WG511v2 PCMCIA Adapter.
is meant for laptop. Not FOR USE in ADSL WiFi MODEM.

2.
When you try in the laptop if Power LED
or the wifi do not bln . exchange wth the shop.

3.
If you are using a Desktop computer
ask for a PCI wireless LAN card
( probably.you may get Netgear card )
netgearwg311.jpg
4.
You have to buy a wifi router.

Last edited by essbebe; 11-15-09 at 04:21 PM.
essbebe is offline   Reply With Quote
Reply

Tags
bsnl, configure, modem, mt841, type

Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads

Thread Thread Starter Forum Replies Last Post
Making the BSNL DataOne Wireless home network guide Admin BSNL broadband 203 11-20-09 10:00 PM
how to configure BSNL Type IV (MT841) modem for autodail and wireless setup. India Broadband Internet BSNL broadband 44 07-28-09 09:47 PM
Problem configuring wireless connection with Type II modem - BSNL broadband Unregistered BSNL broadband 9 02-15-09 09:45 PM
Help on MT841 SmartAX Modem of BSNL armaan BSNL broadband 6 01-17-09 08:04 AM
How to configure BSNL HUAWEI SmartAx (MT841) modem for Autodail in Connected LAN lavakusareddy BSNL broadband 13 10-13-08 10:14 PM


All times are GMT +5.5. The time now is 04:09 PM.


India Broadband Forum