Thread: Cable coding ??

Can we use same cable for connecting pc with Beetel 110TC1 ADSL2 + Router
& connecting two pc's for file sharing OR diff coding is there ??

You need a cross over cable to connect between two machines.

Originally Posted by meetdilip

You need a cross over cable to connect between two machines.

And what abt connecting pc with Router ?

RJ45 is the nomenclature for the wire used to connect PC and router.

use this logic: -
connection between similar devices (modems and routers, or laptop and desktop) uses crossover cable,
different devices (modem to computer, router to computer) will use straight thru cable.

thus, if u r attaching bsnl modem to wifi router and using a desktop as well, connected to the router, thru wired connection, then,
modem to router = crossover cable,
router to desktop / laptop = straight cable,
direct from modem to computer = straight cable.

you can get crimping instructions for straight thru and crossover cables by searching a little on google.

see this for more details.
RJ45 wiring pinout and other modular cable information

Originally Posted by meetdilip

You need a cross over cable to connect between two machines.

hi meetdilip

modem to pc straight & cross both cable are use.

dose not matter straight & cross

good day

@abhishe11sharma
& connecting two pc's for file sharing OR diff coding is there ??
@meetdilip's post is more apt .
You need a cross over cable to connect between two machines.
Did you see/read the link I had given?
Discussion here, thread is about connecting two different systems ( computers)
Please see Post No 1.
Also you have to edit your post, to correct spelling and grammatical mistakes.

RJ45-Registered Jack 45
To connect pc and pc you need a cross over cable, to connect a modem and router or a modem and pc earlier you need a straight cable, but the modem/routers/switches manufactured recently can sense the type of cable and adjust accordingly. That is what we see auto mdix.