Thread: Linksys Wireless Router wrt120n with bsnl dna-a201bei connectivity problem

i tried to follow the instructions of the cd which was given wid the wirelless router but couldnt do anytin..please help me im tryin since 4 hours couldnt do anytin i evn checked a thread by just4kix but tht evn didnt help..
i have a bsnl broadband connection

Please go step by step.
(a)
confirm you are on PPP/PPPoE mode "Always ON"
( userid and PW to be entered in WAN page of modem )
(b)
Enable DHCP in modem Range say 192.168.1.3 to 192.168.1.10
(c)
ensure IP address of modem and wifi router are different.
(d)
Try Connection Wizard in WRT120n
(e)
try lan1 port to desktop from WRT120n
or in laptop( if available) and ensure
internet is connected.
(f)
Check in system you have created a WLAN network
(g)
Check Network SSID as given in wifi router appears
in Wlan network.
(h)
Feedback. item wise.
Copy/Paste ipconfig /all here.
only for LAN and WLAN ( no tunnel data needed)

REF:Re: can't connect to Wii - Cisco Home Community

how to enable dhcp in modem? nd modem means my bsnl modem?

seems your modem DNA-a201bei is same as Ut300r2U etc.
see in lan page ( Advanced options)to enable dhcp and for entries
India Broadband Forum
see my signature link wa3002-g4 for screen shots ( less wifi)

dhcp enabled
Start IP Address: 192.168.1.2
End IP Address:192.168.1.254

is dis ok?

hey can u give me ur yahoo if or sumtin so tht i cn contact u in a faster way?

give feedback item wise.
all wifi routers set up is same and not difficult.
You may be asked to post creeen shots(jpg) of your modem and or wifi router settings.
the links i had given has many clear instructions.
user manual here. download it.
Linksys WRT120N Manuals, Support and Troubleshooting - Wireless Routers

Menu pages will be almost similar.
see this guide by @just4kix.
http://www.indiabroadband.net/broadb...ys-wrt54g.html (Setup of UT-300R2 with Linksys WRT54G)

just tel is my dhcp settings alrite?
i had run the setup of my wireless router
they had asked my usnername and password to acess the router...
so i entered the password which is given me by bsnl which i use right now to connect// but its sayin the username and password is wrong

Please respond to post No 2.

i tried to do all the things u told me in ur post no.2
in that i had run the setup of my wireless router
they had asked my usnername and password to acess the router...
so i entered the password which is given me by bsnl which i use right now to connect// but its sayin the username and password is wrong

in ur post no.2 i saw d pics nd my modem settings are same as in d pics..the prblem is wid router settings..

(i)
are you on "Dialer" mode ?
(j)
copy/paste this data here.
for only LAN and WLAN
Procedure
Start run type cmd Ok
new window
type ipconfig /all
if you cannot answer item wise difficult to suggest anything.
Each response gives us some hint where you are making a mistake
YES ./ NO/ don't know/ cannot understand etc can be responses.

Windows IP Configuration


PPP adapter Broadband Connection 1:

Connection-specific DNS Suffix . :
IPv4 Address. . . . . . . . . . . : 117.199.84.124
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . : 0.0.0.0

Ethernet adapter Bluetooth Network Connection 2:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::836:3c2b:bfb0:8972%12
IPv4 Address. . . . . . . . . . . : 192.168.2.101
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.2.1

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::259d:fce5:58a2:8546%8
IPv4 Address. . . . . . . . . . . : 192.168.2.100
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.2.1

yes im on dialer mode i.e i fill in username nd password first nd den it is connected to the broadband..

Please go step by step.
(a)
confirm you are on PPP/PPPoE mode "Always ON"
( userid and PW to be entered in WAN page of modem )
(b)
Enable DHCP in modem Range say 192.168.1.3 to 192.168.1.10
(c)
ensure IP address of modem and wifi router are different.
(d)
Try Connection Wizard in WRT120n
(e)
try lan1 port to desktop from WRT120n
or in laptop( if available) and ensure
internet is connected.
(f)
Check in system you have created a WLAN network
(g)
Check Network SSID as given in wifi router appears
in Wlan network.
(h)
Feedback. item wise.
Copy/Paste ipconfig /all here.
only for LAN and WLAN ( no tunnel data needed)


in this 1 point..user id and password is d one provided by the bsnl na?

Change to "Always On" PPP/PPPoE mode and uncheck
"Bridged" in wan page of modem
Enter your userid ( without @bsnl ) and PW etc.

Post ipconfig /all for LAN mode only.

Ethernet adapter Local Area Connection 2:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Wireless LAN adapter Wireless Network Connection 2:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : mshome.net
Link-local IPv6 Address . . . . . : fe80::bb:dddf:9952:dc13%12
IPv4 Address. . . . . . . . . . . : 192.168.1.59
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1

i changed my connection to always on nd wen i connected the bsnl modem thru lan it was written internet acess but still wasnt able to open any web page..

Start Network
Properties
Network settings page.
Select tcp/IP box
Properties.
Select "Obtain IP address automatically"
DNs 8.8.8.8 and 208.67.220.220
Apply Save.
.
If you need WIFI mode adsl modem to be connected in PPP/PPPoE mode only.

hey its connected at last..the thing was i was able to connect the modem thru pppoe mode but at last theres a thing called enable firewall and van i had to tick tht i hadnt ticked tht at the first place..then i ran the installation cd of linksys and then they asked me my username and password fr gateway or router..i was fillin the one given by bsnl but actually i had to fill username and password of my wifi router tht evn worked and then it was succesful..

THANKS FOR THE HELP..indiabroadband.net is indeed the best site to solve ones problemm..thnks once agn

i wanted to connect a dvr (ccd cameras) with a static ip address hw can i do tht..

Congrats.
In both modem &. router select Management and
BACKUP present settings as advised earlier.

i wanted to connect a dvr (ccd cameras) with a static ip address hw can i do tht..

Not possible. enable UpNp box in modem.

//[*** SMS language content deleted ***]
Sincere request: If it is not too difficult, please do not use SMS like language/words (e.g., wen, wid, etc.) in knowledge forums. Fun threads may be (but not necessarily) excused.

Please read Forum Etiquette.

Thank you.

- just4kix

i wanted to connect a dvr (ccd cameras) with a static ip address hw can i do tht..

(A)
Give technical specifications of the above ccd camera or cameras.
(B)
How many you intend to use ?
(C)
Company name/ model number /type / any Cd supplied.
(D)
Understand it can be connected to Ethernet port of router.
(E)
If the "STATIC" IP address is not "Top Secret"
you can mention that too!!!

all the ccd cameras are IR cameras which are joined by wires to dvr..
no installation cd provided with the dvr
its a 16 channel dvr we run a hospital here..
so just wanted to monitor things at the hospital when im away from the hospital..
sry cnt give the static ip address its a lil confidential i hope u understand..

Interesting subject but unfamiliar to me.
We have Sony Blue ray DVD player with built in wifi..
Samsung LCD TV with HDMI port.
Watched SUN TV streaming video( from Internet) with hdmi connection from laptop.
I have not studied this system..
2.
Please contact supplier for setup.
Mention model/make of DVR.

3.

What is Needed to View Online:
You do NOT need a PC at Digital Video Recorders Location - just high speed internet. The PRO SERIES "Clear View" DVR plugs directly into your high speed internet connection (modem or router) with an ethernet cable, just like you would with a PC.
A High Speed Internet Service Provider and our Digital Video Recorder is what you need to view your cameras from any high speed internet connection or cell phone (no additional monthly fees). You will Login with your User ID and a Password to your own (Dynamic IP) Address (instructions included). All video is conveniently time, date, and address stamped. Video is also digitally watermarked in order to prevent video evidence tampering.......

source :Google search.