Thread: Kindly suggest a Wireless Router

Hi,
I am using a wired BSNL modem 110TC1 ADSL2+ Router [ Beetel make]. Can you please suggest a compatible wireless router for the same.

Regards,
Amit Gupta

Netgear wgr614V9. guide by @just4kix available in Forum
Broadband How to...."
Mention range/height of WIFI reception.

Usual range radius about 20 to 30 feet
height say upto 20 feet.( conditions apply!

Originally Posted by essbebe

Netgear wgr614V9. guide by @just4kix available in Forum
Broadband How to...."
Mention range/height of WIFI reception.

Usual range radius about 20 to 30 feet
height say upto 20 feet.( conditions apply!

Thanks for the update. How many computers can it support and what would be the price?

i m using belkin g router... from past 3 months... range come around 2 floors.. cost rs1350 with 5 years warranty... easy to setup

How many computers can........

IN lan mode 4 computers.
In WIFI mode any number within reasonable range
( depends on signal strength)
You should also confirm info asked for,

Mention range/height of WIFI reception.

instead of blindly using "quote"in your reply.
See Example above.

Originally Posted by essbebe

IN lan mode 4 computers.
In WIFI mode any number within reasonable range
( depends on signal strength)
You should also confirm info asked for,


instead of blindly using "quote"in your reply.
See Example above.

Hi,
I have connected the 110TC1 ADSL2+ with a BELKIN surf Wirless router. I was able to connect two laptops but could not get an internet connection by using a wired connection with BELKIN surf. When I disconnected the wireless ; I was able to connect the desktop but then the wireless won't work. It seems only either wireless or wired would work at a time. What can I do to solve the problem..
Regards,
Amit

1.
presume you are in PPP/PPoE mode (userId/PW in modem wan page).
Not "bridged"Dialer mode.
2.
Check DHCP is enabled in modem 110TC1
give range say 192.168.1.3 to 192.168.1.10
Enable UpNp option if available.
Save reboot. wait for 2 minutes.

3. In TCP/IP properties page
select Obtain Ip address automatically. in all systems.
see this ( Thanks to @Just4kix)
Ignore last screenshot.
India Broadband Forum