Thread: 192.168.1.1 no access for Port Forwarding

Hi, i'm on BB1350ULF And my modem is AN1020-20 (BSNL's)
I can't open 192.168.1.1 to config my modem to forward ports

it was fine a month ago

and also there was an option for browser,app support in the config page i might have unchecked the box by mistake since then i can't access the config page of my modem .Is there a way to reset it to the original state

Plz Help i really need to forward ports

ThNX

I think there will be a slot somewhere on the modem, where you can poke sharp things and factory-reset the modem. I'm not sure. I had such option in my Type-I modem.

When connected to Internet check your Ip here.
What Is My IP Address - Shows Your IP Address
say 117.xx.xx.xx
Retype it in address bar of browser.
A new window may open asking you to enter UserId/PW for your modem.

Access the modem settings.
2.
If not successful see link 192.168.1.1 below.
You may have to reset to Factory settings the router.
3.
Check Teracom link for modem settings.

open dos type ipconfig and press enter see what is your default gateway use that ip to open router page.
I want u to first try this..if doesn't work then read further

another way to enter to router is
1. Go to "RUN" type 'cmd' and enter.

2. Type "telnet 192.168.1.1"

3. Make sure that your Firewall should allow.

6. Go to NAT.

7. Go to Virtual Server

8. Now type "1" to add

Service name <> : utorrent or Bittorrent
Protocol : 1
External start port <> : 55641 >>>>>>>>use same port in all above 40000
External end port <> : 55641 >>>>>>>>and use that same port in torrent
Internal start port <> : 55641
Internal end port <> : 55641
Internal server IP address <> : 192.168.1.1

9. Now exit and come to "Main Menu"

10. and Save and Reboot press '1' to confirm.

Wait for 2 minutes

and Now u hav all done...enjoy:-)

Originally Posted by essbebe

When connected to Internet check your Ip here.

say 117.xx.xx.xx
Retype it in address bar of browser.
A new window may open asking you to enter UserId/PW for your modem.

Access the modem settings.
2.
If not successful see link 192.168.1.1 below.
You may have to reset to Factory settings the router.
3.
Check Teracom link for modem settings.

Originally Posted by paul.1911

open dos type ipconfig and press enter see what is your default gateway use that ip to open router page.
I want u to first try this..if doesn't work then read further

another way to enter to router is
1. Go to "RUN" type 'cmd' and enter.

2. Type "telnet 192.168.1.1"

3. Make sure that your Firewall should allow.

6. Go to NAT.

7. Go to Virtual Server

8. Now type "1" to add

Service name <> : utorrent or Bittorrent
Protocol : 1
External start port <> : 55641 >>>>>>>>use same port in all above 40000
External end port <> : 55641 >>>>>>>>and use that same port in torrent
Internal start port <> : 55641
Internal end port <> : 55641
Internal server IP address <> : 192.168.1.1

9. Now exit and come to "Main Menu"

10. and Save and Reboot press '1' to confirm.

Wait for 2 minutes

and Now u hav all done...enjoy:-)

ThNX A Million you guys are life savers..........i tried & it worked fine its solved